ISO/IEC 18013-2:2020/Amd 1

Personal identification — ISO-compliant driving licence — Part 2: Machine-readable technologies — Amendment 1: DG11 length for compact encoding

Identification des personnes — Permis de conduire conforme à l'ISO — Partie 2: Technologies lisibles par une machine — Amendement 1: Titre manque

General Information

• Status: Not Published
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Drafting Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Current Stage: 6000 - International Standard under publication
• Completion Date: 02-Mar-2023

Relations

• Amends: ISO/IEC 18013-2:2020 - Personal identification — ISO-compliant driving licence — Part 2: Machine-readable technologies
• Effective Date: 06-Jun-2022

Standards Content (Sample)

Deleted: Date: 2022-12-13¶
ISO/IEC 18013-2:2020/PRF Amd 1
Deleted: AM
ISO/IEC JTC 1/SC 17
Deleted: :2022(E)
Deleted: /WG 10
Secretariat: BSI
Date: 2023-02-02
Deleted: —
Personal identification — ISO-compliant driving licence —
Part 2:
Machine-readable technologies
AMENDMENT 1: DG11 length for compact encoding
Identification des personnes — Permis de conduire conforme à l'ISO — Deleted: —
Partie 2: Technologies lisibles par une machine
AMENDEMENT 1
Deleted: Section Break (Next Page)
Copyright notice¶
Copyright notice¶
FDIS stage
This
---------------------- Page: 1 ----------------------
ISO/IEC 18013-2:2020/PRF Amd 1(E)
© ISO/IEC 2020
Deleted: document is a working draft

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this

Deleted: committee draft and is copyright-protected

publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, by ISO. While …

including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can

Deleted: reproduction

be requested from either ISO at the address below or ISO’s member body in the country of the requester.

Deleted: working drafts or committee drafts in any
form for use by participants in the ISO standards
ISO copyright office
development process is permitted without prior
CP 401 • Ch. de Blandonnet 8
permission from ISO, neither
CH-1214 Vernier, Geneva
Deleted: document nor any extract from it
Phone: + 41 22 749 01 11
E-mail: [e-mail] Deleted: , stored
Website: www.iso.org
Deleted: transmitted in any form for any other
purpose…
Published in Switzerland
Deleted: from ISO
Deleted: Requests for permission to reproduce this
document for the purpose of selling it should be
addressed as shown below or to ISO's member body in
the country of the requester:¶
Deleted: Case postale 56 •
Deleted: 1211
Deleted: 20
Deleted: Tel.
Deleted: Fax + 41 22 749 09 47¶
Deleted: Web
Deleted: Reproduction for sales purposes may be
subject to royalty payments or a licensing agreement.¶
Violators may be prosecuted.¶
ii © ISO/IEC 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 18013-2:2020/PRF Amd 1(E)
Foreword

ISO (the International Organization for Standardization) and IEC (the International Electrotechnical

Commission) form the specialized system for worldwide standardization. National bodies that are

members of ISO or IEC participate in the development of International Standards through technical

committees established by the respective organization to deal with particular fields of technical activity.

ISO and IEC technical committees collaborate in fields of mutual interest. Other international

organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the

work.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of document should be noted. This document was drafted in accordance with the editorial

rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
Field Code Changed

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details

of any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC list of patent

declarations received (see https://patents.iec.ch).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the World

Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see

www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.

Field Code Changed

This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, SC 17,

Cards and security devices for personal identification.
A list of all parts in the ISO/IEC 18013 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-

Field Code Changed
committees.
© ISO/IEC 2020 – All rights reserved iii
---------------------- Page: 3 ----------------------
Deleted: —
Personal identification — ISO-compliant driving licence —
Part 2:
Machine-readable technologies
AMENDMENT 1: DG11 length for compact encoding
Page 2, Clause 2 Normative references
Replace
ISO/IEC 7816-11:2017
with
ISO/IEC 7816-11:2022
In C.4.7 replace ISO/IEC 7816-11:2017 with ISO/IEC 7816-11:2022.
Replace
ISO/IEC 19785-1:2015
with
ISO/IEC 19785-1:2020
Move ISO/IEC 19785-1:2020 to the Bibliography.
Replace
ISO/IEC 19785-3:2015
with
ISO/IEC 19785-3:2020
In 8.7 and C.4.7 replace ISO/IEC 19785-3:2015 with ISO/IEC 19785-3:2020.
Page 4, Clause 3.1.8
Add the following Note
“Note 3 to entry: See Annex B and Annex E (informative)." Deleted: )
Page 24, Clause B.1
Replace

"The annex also prescribes means of validating and authenticating the stored data."

with
"Means for authenticating the stored data are specified in ISO/IEC 18013-3.

This version 02 of compact encoding supersedes the deprecated version 01 included in Annex E

(informative) for the information of manufacturers of readers that must be able to read IDL cards issued

in accordance with this version that have not yet expired.”
Page 25, Clause B.4.1
Replace
---------------------- Page: 4 ----------------------
ISO/IEC 18013-2:2020/PRF Amd 1(E)

"[header] × [Data Group 1] × [Data Group 2] × [Data Group 3] × [Data Group 4] × [Data Group 7] × [Data

Group 11]¶"
with

"[header] × [Data Group 1] × [Data Group 2] × [Data Group 3] × [Data Group 4] × [Data Group 7] × [Data

Group 11] × [Data Group 12] × [DG.SOD.1] × [DG.SOD.H]¶"
and insert the following statement:
"Data Group 12, DG.SOD.1, and DG.SOD.H are specified in ISO/IEC 18013-3."
Replace
“Data Group 11 is followed by the end of file delimiter (¶).”
with
“DG.SOD.H is followed by the end of file delimiter (¶).”
Page 25, Clause B.4.2
In definition of Version, replace ‘01’ with ‘02’.
Page 26, Clause B.4.2
In the EXAMPLE replace the WG 10 version level "1" with "2".

In the EXAMPLE replace ‘A0 00 00 02 48 01 00 01 00 82 06 3E’ with ‘A0 00 00 02 48 01 00 02 00 82 06

3E’.
Page 31, Clause B.5.11
Insert the following at the end of the clause:
However, DG11 shall include the DG length.

Data Group 11 thus shall be coded as follows (spaces are included to enhance legibility only, and are not

encoded):
[previous data group] × [DG11 length] [DG11 data block] × [next data group]
where

[DG11 length] is the length of the [DG11 data block] field, expressed using ASN.1

rules;

[DG 11 data block] is a variable length field, encoded in accordance with Table B.1, with

the understanding that delimiters may be included in data fields as
data (i.e. without fulfilling a delimiting function).
Page 31, Clause B.5.12
Replace the clause with the following overall example:

Matthias Werner Kleinscmidt (a male) was born on 5 March 1972. On 31 August 2007, the Roads

Authority of the Namibia Department for Transport issued Matthias Werner an IDL (number

123456789AB) that expires after 5 years. The issuing authority has also assigned an administrative

number (03/7203055367088) to the IDL.

The IDL authorises Matthias Werner to drive Light Vehicles (since 5 August 2003), Medium Sized Goods

Vehicles (since 11 August 2005) and Passenger Vehicles (since 2 February 2007).

As domestic data, the IDL includes a TRIPS number (NAM/01/16/1234567/0) and Professional Driving

Permit (PrDP) authorisation to drive both Passenger (P) and Goods (G) vehicles until 20 August 2009.

2 © ISO/IEC 2020 – All rights reserved
---------------------- Page: 5 ----------------------
ISO/IEC 18013-2:2020/PRF Amd 1(E)

One portrait image (1003 bytes) using JPEG2000 compression is included. The minutiae of his right index

finger are stored as well (613 byte data block; compact size, with ridge skeleton end and ridge skeleton

bifurcation points).

The above information will logically be written as set out below (square brackets and spaces are used

where appropriate to improve readability; single quotes signify hexadecimal numbers):

['A0 00 00 02 48 01 00'] ['02 00'] [82 07 0F] × KLEINSCMIDT ÷ MATTHIAS WERNER ÷ ’19 72 03 05’

÷ ’20 07 08 31’ ÷ ’20 12 08 30’ ÷ NAM ÷ Roads Authority ÷ 123456789AB ÷ B ; ’20 03 08 05’;;;;; C1 ;

’20 05 04 11’ ;;;;; D ; ’20 07 02 02’ ;;;; × 1 ÷÷÷÷÷÷ × 03/7203055367088 ÷ ’01’ ÷ ’01’ ÷ ’00 00 00 00’ ×

['4'] [1003] [Data Group 4 Portrait Image] × ['01 01'] ['00 06'] [613] [Data Group 7 Fingerprint

template] × [30] NAM/01/16/1234567/0 ÷ ÷ P ; G ;; ’20 09 08 30’ × × [DG.SOD.1 length] [digital

signature] × [DG.SOD.H length] [hash value]¶
The above fields will be encoded as follows (all numbers are hexadecimal):

[A0 00 00 02 48 01 00] [02 00] [82 07 0F] × [4B 4C 45 49 4E 53 43 4D 49 44 54] ÷ [4D 41 54 54 48

49 41 53 20 57 45 52 4E 45 52] ÷ [19 72 03 05] ÷ [20 07 08 31] ÷ [20 12 08 30] ÷ [4E 41 4D] ÷ [52

6F 61 64 73 20 41 75 74 68 6F 72 69 74 79] ÷ [31 32 33 34 35 36 37 38 39 41 42] ÷ [42 3B 20 03 08

05 3B 3B 3B 3B 3B 43 31 3B 20 05 04 11 3B 3B 3B 3B 3B 44 3B 20 07 02 02 3B 3B 3B 3B] × [01]

÷÷÷÷÷÷ × [30 33 2F 37 32 30 33 30 35 35 33 36 37 30 38 38] ÷ [01] ÷ [01] ÷ [00 00 00 00] × [04] [82

03 EB] [Data Group 4 Portrait Image] × [01 01] [00 06] [82 02 65] [Data Group 7 Fingerprint

template] × [1E 4E 41 4D 2F 30 31 2F 31 36 2F 31 32 33 34 35 36 37 2F 30] ÷ ÷ [50 3B 47 3B 3B 20

09 08 30] × × [DG.SOD.1 length] [digital signature] × [DG.SOD.H length] [hash value] ¶

The final byte stream will be as follows:

A0 00 00 02 48 01 00 02 00 82 07 0F D7 4B 4C 45 49 4E 53 43 4D 49 44 54 F7 4D 41 54 54 48 49 41

53 20 57 45 52 4E 45 52 F7 19 72 03 05 F7 20 07 08 31 F7 20 12 08 30 F7 4E 41 4D F7 52 6F 61 64

73 20 41 75 74 68 6F 72 69 74 79 F7 31 32 33 34 35 36 37 38 39 41 42 F7 42 3B 20 03 08 05 3B 3B

3B 3B 3B 43 31 3B 20 05 04 11 3B 3B 3B 3B 3B 44 3B 20 07 02 02 3B 3B 3B 3B D7 01 F7 F7 F7 F7

F7 F7 D7 30 33 2F 37 32 30 33 30 35 35 33 36 37 30 38 38 F7 01 F7 01 F7 00 00 00 00 D7 04 82 03

EB [Data Group 4 Portrait Image] D7 01 01 00 06 82 02 65 [Data Group 7 Fingerprint template] D7

1E 4E 41 4D 2F 30 31 2F 31 36 2F 31 32 33 34 35 36 37 2F 30 F7 F7 50 3B 47 3B 3B 20 09 08 30 D7

D7 [DG.SOD.1 length] [digital signature] D7 [DG.SOD.H length] [hash value] B6
Page 33, Clause B.6

In the EXAMPLE replace 'A0 00 00 02 48 01 00 03 00 82 07 0A' with 'A0 00 00 02 48 03 00 02 00 82 07

0A'.

In the EXAMPLE replace ‘53’ 'A0 00 00 02 48 03 00 01 00 82 07 0A … B6' with ‘53’ 'A0 00 00 02 48 03 00

02 00 82 07 0A … B6'
After Annex D
Add new Annex E.
© ISO/IEC 2020 – All rights reserved 3
---------------------- Page: 6 ----------------------
ISO/IEC 18013-2:2020/PRF Amd 1(E)
Annex E
(informative)
Compact encoding (Version 01)
E.1 General

This annex defines the deprecated compact encoding scheme (ver 01) for the information of

manufacturers of readers that must be able to read IDL cards issued in accordance with this version that

have not yet expired.
E.2 Purpose

Compact encoding is applied when limited memory capacity is available for the IDL application (not

exceeding 5 kB). This scheme requires the read device to read all data at the same time, after which the

data is then parsed.

For compact encoding, a typical minimum capacity of 300 usable bytes is required. Typical media on

which compact encoding is implemented are:
— 2D bar codes,
Deleted: —
— RFID, and
Deleted: —

— PICs and ICs with contacts with limited capacity available for the IDL application.

Deleted: —

The limited storage capacity means that the number of data groups is restricted, as is the data size of

each. The compact encoding scheme accordingly provides for Data Group 1, and optionally for any

combination of data groups 2, 3, 4, 7 and 11, subject to storage capacity availability.

Means
...

INTERNATIONAL ISO/IEC
STANDARD 18013-2
Second edition
2020-06
AMENDMENT 1
Personal identification — ISO-
compliant driving licence —
Part 2:
Machine-readable technologies
AMENDMENT 1: DG11 length for
compact encoding
Identification des personnes — Permis de conduire conforme à
l'ISO —
Partie 2: Technologies lisibles par une machine
AMENDEMENT 1
PROOF/ÉPREUVE
Reference number
ISO/IEC 18013-2/Amd. 1:2023(E)
© ISO/IEC 2023
---------------------- Page: 1 ----------------------
ISO/IEC 18013-2/Amd. 1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE © ISO/IEC 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 18013-2/Amd. 1:2023(E)
Foreword

ISO (the International Organization for Standardization) and IEC (the International Electrotechnical

Commission) form the specialized system for worldwide standardization. National bodies that are

members of ISO or IEC participate in the development of International Standards through technical

committees established by the respective organization to deal with particular fields of technical

activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international

organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the

work.

The procedures used to develop this document and those intended for its further maintenance

are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria

needed for the different types of document should be noted. This document was drafted in

accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or

www.iec.ch/members_experts/refdocs).

Attention is drawn to the possibility that some of the elements of this document may be the subject

of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent

rights. Details of any patent rights identified during the development of the document will be in the

Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC

list of patent declarations received (see https://patents.iec.ch).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to

the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see

www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.

This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, SC 17,

Cards and security devices for personal identification.
A list of all parts in the ISO/IEC 18013 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards

body. A complete listing of these bodies can be found at www.iso.org/members.html and

www.iec.ch/national-committees.
iii
© ISO/IEC 2023 – All rights reserved PROOF/ÉPREUVE
---------------------- Page: 3 ----------------------
ISO/IEC 18013-2/Amd. 1:2023(E)
Personal identification — ISO-compliant driving licence —
Part 2:
Machine-readable technologies
AMENDMENT 1: DG11 length for compact encoding
Page 2, Clause 2 Normative references
Replace
ISO/IEC 7816-11:2017
with
ISO/IEC 7816-11:2022
In C.4.7 replace ISO/IEC 7816-11:2017 with ISO/IEC 7816-11:2022.
Replace
ISO/IEC 19785-1:2015
with
ISO/IEC 19785-1:2020
Move ISO/IEC 19785-1:2020 to the Bibliography.
Replace
ISO/IEC 19785-3:2015
with
ISO/IEC 19785-3:2020
In 8.7 and C.4.7 replace ISO/IEC 19785-3:2015 with ISO/IEC 19785-3:2020.
Page 4, Clause 3.1.8
Add the following Note
“Note 3 to entry: See Annex B and Annex E (informative)."
Page 24, Clause B.1
Replace

"The annex also prescribes means of validating and authenticating the stored data."

© ISO/IEC 2023 – All rights reserved PROOF/ÉPREUVE
---------------------- Page: 4 ----------------------
ISO/IEC 18013-2/Amd. 1:2023(E)
with
"Means for authenticating the stored data are specified in ISO/IEC 18013-3.

This version 02 of compact encoding supersedes the deprecated version 01 included in Annex E

(informative) for the information of manufacturers of readers that must be able to read IDL cards issued

in accordance with this version that have not yet expired.”
Page 25, Clause B.4.1
Replace

"[header] × [Data Group 1] × [Data Group 2] × [Data Group 3] × [Data Group 4] × [Data Group 7] × [Data

Group 11]¶"
with

"[header] × [Data Group 1] × [Data Group 2] × [Data Group 3] × [Data Group 4] × [Data Group 7] × [Data

Group 11] × [Data Group 12] × [DG.SOD.1] × [DG.SOD.H]¶"
and insert the following statement:
"Data Group 12, DG.SOD.1, and DG.SOD.H are specified in ISO/IEC 18013-3."
Replace
“Data Group 11 is followed by the end of file delimiter (¶).”
with
“DG.SOD.H is followed by the end of file delimiter (¶).”
Page 25, Clause B.4.2
In definition of Version, replace ‘01’ with ‘02’.
Page 26, Clause B.4.2
In the EXAMPLE replace the WG 10 version level "1" with "2".

In the EXAMPLE replace ‘A0 00 00 02 48 01 00 01 00 82 06 3E’ with ‘A0 00 00 02 48 01 00 02 00 82 06

3E’.
Page 31, Clause B.5.11
Insert the following at the end of the clause:
However, DG11 shall include the DG length.

Data Group 11 thus shall be coded as follows (spaces are included to enhance legibility only, and are not

encoded):
[previous data group] × [DG11 length] [DG11 data block] × [next data group]
PROOF/ÉPREUVE © ISO/IEC 2023 – All rights reserved
---------------------- Page: 5 ----------------------
ISO/IEC 18013-2/Amd. 1:2023(E)
where

[DG11 length] is the length of the [DG11 data block] field, expressed using ASN.1 rules;

[DG 11 data block] is a variable length field, encoded in accordance with Table B.1, with the

understanding that delimiters may be included in data fields as data (i.e.
without fulfilling a delimiting function).
Page 31, Clause B.5.12
Replace the clause with the following overall example:

Matthias Werner Kleinscmidt (a male) was born on 5 March 1972. On 31 August 2007, the Roads

Authority of the Namibia Department for Transport issued Matthias Werner an IDL (number

123456789AB) that expires after 5 years. The issuing authority has also assigned an administrative

number (03/7203055367088) to the IDL.

The IDL authorises Matthias Werner to drive Light Vehicles (since 5 August 2003), Medium Sized Goods

Vehicles (since 11 August 2005) and Passenger Vehicles (since 2 February 2007).

As domestic data, the IDL includes a TRIPS number (NAM/01/16/1234567/0) and Professional Driving

Permit (PrDP) authorisation to drive both Passenger (P) and Goods (G) vehicles until 20 August 2009.

One portrait image (1003 bytes) using JPEG2000 compression is included. The minutiae of his right

index finger are stored as well (613 byte data block; compact size, with ridge skeleton end and ridge

skeleton bifurcation points).

The above information will logically be written as set out below (square brackets and spaces are used

where appropriate to improve readability; single quotes signify hexadecimal numbers):

['A0 00 00 02 48 01 00'] ['02 00'] [82 07 0F] × KLEINSCMIDT ÷ MATTHIAS WERNER ÷ ’19 72 03

05’ ÷ ’20 07 08 31’ ÷ ’20 12 08 30’ ÷ NAM ÷ Roads Authority ÷ 123456789AB ÷ B ; ’20 03 08 05’;;;;;

C1 ; ’20 05 04 11’ ;;;;; D ; ’20 07 02 02’ ;;;; × 1 ÷÷÷÷÷÷ × 03/7203055367088 ÷ ’01’ ÷ ’01’ ÷ ’00 00 00

00’ × ['4'] [1003] [Data Group 4 Portrait Image] × ['01 01'] ['00 06'] [613] [Data Group 7 Fingerprint

template] × [30] NAM/01/16/1234567/0 ÷ ÷ P ; G ;; ’20 09 08 30’ × × [DG.SOD.1 length] [digital

signature] × [DG.SOD.H length] [hash value]¶
The above fields will be encoded as follows (all numbers are hexadecimal):

[A0 00 00 02 48 01 00] [02 00] [82 07 0F] × [4B 4C 45 49 4E 53 43 4D 49 44 54] ÷ [4D 41 54 54 48

49 41 53 20 57 45 52 4E 45 52] ÷ [19 72 03 05] ÷ [20 07 08 31] ÷ [20 12 08 30] ÷ [4E 41 4D] ÷ [52 6F

61 64 73 20 41 75 74 68 6F 72 69 74 79] ÷ [31 32 33 34 35 36 37 38 39 41 42] ÷ [42 3B 20 03 08 05

3B 3B 3B 3B 3B 43 31 3B 20 05 04 11 3B 3B 3B 3B 3B 44 3B 20 07 02 02 3B 3B 3B 3B] × [01] ÷÷÷÷÷÷

× [30 33 2F 37 32 30 33 30 35 35 33 36 37 30 38 38] ÷ [01] ÷ [01] ÷ [00 00 00 00] × [04] [82 03 EB]

[Data Group 4 Portrait Image] × [01 01] [00 06] [82 02 65] [Data Group 7 Fingerprint template] ×

[1E 4E 41 4D 2F 30 31 2F 31 36 2F 31 32 33 34 35 36 37 2F 30] ÷ ÷ [50 3B 47 3B 3B 20 09 08 30] × ×

[DG.SOD.1 length] [digital signature] × [DG.SOD.H length] [hash value] ¶
The final byte stream will be as follows:

A0 00 00 02 48 01 00 02 00 82 07 0F D7 4B 4C 45 49 4E 53 43 4D 49 44 54 F7 4D 41 54 54 48 49 41

53 20 57 45 52 4E 45 52 F7 19 72 03 05 F7 20 07 08 31 F7 20 12 08 30 F7 4E 41 4D F7 52 6F 61 64

73 20 41 75 74 68 6F 72 69 74 79 F7 31 32 33 34 35 36 37 38 39 41 42 F7 42 3B 20 03 08 05 3B 3B

3B 3B 3B 43 31 3B 20 05 04 11 3B 3B 3B 3B 3B 44 3B 20 07 02 02 3B 3B 3B 3B D7 01 F7 F7 F7 F7 F7

F7 D7 30 33 2F 37 32 30 33 30 35 35 33 36 37 30 38 38 F7 01 F7 01 F7 00 00 00 00 D7 04 82 03 EB

[Data Group 4 Portrait Image] D7 01 01 00 06 82 02 65 [Data Group 7 Fingerprint template] D7 1E

4E 41 4D 2F 30 31 2F 31 36 2F 31 32 33 34 35 36 37 2F 30 F7 F7 50 3B 47 3B 3B 20 09 08 30 D7 D7

[DG.SOD.1 length] [digital signature] D7 [DG.SOD.H length] [hash value] B6
© ISO/IEC 2023 – All rights reserved PROOF/ÉPREUVE
---------------------- Page: 6 ----------------------
ISO/IEC 18013-2/Amd. 1:2023(E)
Page 33, Clause B.6

In the EXAMPLE replace 'A0 00 00 02 48 01 00 03 00 82 07 0A' with 'A0 00 00 02 48 03 00 02 00 82 07

0A'.

In the EXAMPLE replace ‘53’ 'A0 00 00 02 48 03 00 01 00 82 07 0A … B6' with ‘53’ 'A0 00 00 02 48 03 00

02 00 82 07 0A … B6'
After Annex D
Add new Annex E.
PROOF/ÉPREUVE © ISO/IEC 2023 – All rights reserved
---------------------- Page: 7 ----------------------
ISO/IEC 18013-2/Amd. 1:2023(E)
Annex E
(informative)
Compact encoding (Version 01)
E.1 General

This annex defines the deprecated compact encoding scheme (ver 01) for the information of

manufacturers of readers that must be able to read IDL cards issued in accordance with this version

that have not yet expired.
E.2 Purpose

Compact encoding is applied when limited memory capacity is available for the IDL application (not

exceeding 5 kB). This scheme requires the read device to read all data at the same time, after which the

data is then parsed.

For compact encoding, a typical minimum capacity of 300 usable bytes is required. Typical media on

which compact encoding is implemented are:
— 2D bar codes,
— RFID, and

— PICs and ICs with contacts with limited capacity available for the IDL application.

The limited storage capacity means that the number of data groups is restricted, as is the data size

of each. The compact encoding scheme accordingly provides for Data Group 1, and optionally for any

combination of data groups 2, 3, 4, 7 and 11, subject to storage capacity availability.

Means for authenticating the stored data are specified in ISO/IEC 18013-3.
E.3 Overview

The compact encoding method generates one data string containing all data groups. This data string is

written to (and read from) storage media in the format provided for by each technology.

The compact encoding method differentiates between the following two types of data groups:

— Type 1 data group: Data groups that contain only data of which the allowable characters are specified

in this document (i.e. data groups 1, 2 and 3).
— Type 2 data
...