ISO 22036:2024
(Main)Environmental solid matrices — Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)
Environmental solid matrices — Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)
This document specifies a method for the determination of the following elements in aqua regia, nitric acid or mixture of hydrochloric (HCl), nitric (HNO3) and tetrafluoroboric (HBF4)/hydrofluoric (HF) acid digests of soil, treated biowaste, waste, sludge and sediment: Aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), chromium (Cr), cobalt (Co), copper (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gallium (Ga), gadolinium (Gd), germanium (Ge), gold (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), iron (Fe), lanthanum (La), lead (Pb), lithium (Li), lutetium (Lu) magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), neodymium (Nd), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), praseodymium (Pr), rhodium (Rh), ruthenium (Ru), samarium (Sm), scandium (Sc), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulfur (S), tantalum (Ta), tellurium (Te), terbium (Tb), thallium (Tl), thulium (Tm), thorium (Th), tin (Sn), titanium (Ti), tungsten (W), vanadium (V), yttrium (Y), ytterbium (Yb), zinc (Zn) and zirconium (Zr). The method is also applicable to other extracts or digests originating from, for example, DTPA extraction, fusion methods or total digestion methods, provided the user has verified the applicability. The method has been validated for the elements given in Table A.1 (sludge), Table A.2 (compost) and Table A.3 (soil). The method is applicable for other solid matrices and other elements as listed above, provided the user has verified the applicability. This method is also applicable for the determination of major, minor and trace elements in aqua regia and nitric acid digests and in eluates of construction products (EN 17200[22]). NOTE Construction products include e.g. mineral-based products; bituminous products; metals; wood-based products; plastics and rubbers; sealants and adhesives; paints and coatings.
Matrices solides environnementales — Dosage d’éléments par spectroscopie d’émission optique avec plasma induit par haute fréquence (ICP-OES)
Le présent document spécifie une méthode de dosage des éléments suivants dans des digestats d’eau régale, d’acide nitrique ou de mélange d’acides chlorhydrique (HCl), nitrique (HNO3) et tétrafluoroborique (HBF4)/fluorhydrique (HF) de sols, de biodéchets traités, de déchets, de boues et de sédiment: Aluminium (Al), antimoine (Sb), arsenic (As), baryum (Ba), béryllium (Be), bismuth (Bi), bore (B), cadmium (Cd), calcium (Ca), cérium (Ce), chrome (Cr), cobalt (Co), cuivre (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gallium (Ga), gadolinium (Gd), germanium (Ge), or (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), fer (Fe), lanthane (La), plomb (Pb), lithium (Li), lutécium (Lu) magnésium (Mg), manganèse (Mn), mercure (Hg), molybdène (Mo), néodyme (Nd), nickel (Ni), palladium (Pd), phosphore (P), platine (Pt), potassium (K), praséodyme (Pr), rhodium (Rh), ruthénium (Ru), samarium (Sm), scandium (Sc), sélénium (Se), silicium (Si), argent (Ag), sodium (Na), strontium (Sr), soufre (S), tantale (Ta), tellure (Te), terbium (Tb), thallium (Tl), thulium (Tm), thorium (Th), étain (Sn), titane (Ti), tungstène (W), vanadium (V), yttrium (Y), ytterbium (Yb), zinc (Zn) et zirconium (Zr). Cette méthode s’applique également à d’autres extraits ou digestats issus, par exemple, de l’extraction au DTPA, de méthodes de fusion ou de méthodes de digestion totale, sous réserve que l’utilisateur ait vérifié l’applicabilité. Cette méthode a été validée pour les éléments indiqués dans le Tableau A.1 (boues), le Tableau A.2 (compost) et le Tableau A.3 (sols). Elle est applicable à d’autres matrices solides et aux autres éléments énumérés ci-dessus, à condition que l’utilisateur ait vérifié l’applicabilité. Cette méthode est également applicable au dosage des éléments majeurs, mineurs et à l’état de trace dans des digestats d’eau régale et d’acide nitrique ainsi que dans des éluats de produits de construction (EN 17200[22]). NOTE Les produits de construction comprennent par exemple les produits minéraux; les produits bitumineux; les métaux; les produits ligneux; les matières plastiques et les caoutchoucs; les mastics et les adhésifs; les peintures et les revêtements.
General Information
Relations
Buy Standard
Standards Content (Sample)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 22036
ISO/TC 190/SC 3
Environmental solid matrices —
Secretariat: DIN
Determination of elements using
Voting begins on:
2023-10-06 inductively coupled plasma optical
emission spectrometry (ICP-OES)
Voting terminates on:
2023-12-01
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 22036:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 1 ----------------------
ISO/FDIS 22036:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 22036
ISO/TC 190/SC 3
Environmental solid matrices —
Secretariat: DIN
Determination of elements using
Voting begins on:
inductively coupled plasma optical
emission spectrometry (ICP-OES)
Voting terminates on:
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/FDIS 22036:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 2 ----------------------
ISO/FDIS 22036:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Interferences . 3
5.1 General . 3
5.2 Spectral interferences . 3
5.3 Nonspectral interferences . 4
6 Reagents . 5
7 Apparatus .
...
ISO/TC 190/SC 3
Date: 2023-05-26
ISO/FDIS 22036:2023(E)
ISO/TC 190/SC 3/WG 1
Secretariat: DIN
Date: 2023-09-21
Environmental solid matrices — Determination of elements using
inductively coupled plasma optical emission spectrometry (ICP-
OES)
Élément introductif — Élément central — Élément complémentaire
---------------------- Page: 1 ----------------------
Copyright notice
ThisFDIS stage
---------------------- Page: 2 ----------------------
ISO/FDIS 22036:2023(E)
© ISO document is a working draft2023
All rights reserved. Unless otherwise specified, or committee draft and is copyright-protected by ISO. While required
in the reproduction of working drafts or committee drafts in any form for use by participants in the ISO standards
development process is permitted without prior permission from ISO, neithercontext of its implementation, no part
of this document nor any extract from itpublication may be reproduced, stored or utilized otherwise in any form or
transmitted in any form for any other purposeby any means, electronic or mechanical, including photocopying, or
posting on the internet or an intranet, without prior written permission. Permission can be requested from either
ISO.
Requests for permission to reproduce this document for at the purpose of selling it should be addressed as
shownaddress below or to ISO'sISO’s member body in the country of the requester:.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
E-mail: copyright@iso.org
Website: www.iso.org[Indicate the full address, telephone number, fax number, telex number, and electronic mail
address, as appropriate, of the Copyright Manager of the ISO member body responsible for the secretariat of the TC
or SC within the framework of which the working document has been prepared.]
Reproduction for sales purposes may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
Published in Switzerland
© ISO 2023 – All rights reserved iii
© ISO 2022 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/FDIS 22036:2023(E)
Contents Page
Foreword . vi
Introduction . viii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 3
5 Interferences . 3
5.1 General . 3
5.2 Spectral interferences . 3
5.3 Non-spectral interferences . 5
6 Reagents . 6
7 Apparatus . 9
8 Procedure . 9
8.1 Cleaning of glassware . 9
8.2 Instrument performance parameters . 9
8.3 Instrument opti
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.