ISO 13094:2025

Composites and reinforcement fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Combined stress test

This document specifies the test method used to determine the strength of the adhesive-bonded carbon fibre reinforced plastics (CFRP) to metal assemblies under combined loading conditions. The loading fixture, a standard specimen, and procedure for combined shear and normal load tests under plane stress conditions are provided. The test method is also applicable to bonded joints between metals and other composite materials, including glass fibre-reinforced plastics. This document does not cover specimen preparation of the adhesive joint.

Composites et fibres de renfort — Assemblages de plastiques renforcés de fibres de carbone (CFRP) et de métal — Essais sous contraintes combinées

General Information

• Status: Not Published
• Publication Date: 08-Apr-2025
• ICS: 83.120 - Reinforced plastics
• Technical Committee: ISO/TC 61/SC 13 - Composites and reinforcement fibres
• Drafting Committee: ISO/TC 61/SC 13 - Composites and reinforcement fibres
• Current Stage: 6060 - International Standard published
• Start Date: 09-Apr-2025
• Due Date: 25-Nov-2026
• Completion Date: 09-Apr-2025

Standards Content (Sample)

International
Standard
ISO 13094
First edition
Composites and reinforcement
2025-04
fibres — Carbon fibre reinforced
plastics (CFRPs) and metal
assemblies — Combined stress test
Composites et fibres de renfort — Assemblages de plastiques
renforcés de fibres de carbone (CFRP) et de métal — Essais sous
contraintes combinées
Reference number
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3  Terms and definitions . 1
4 Principle . 3
5 Apparatus . 3
5.1 Combined loading fixture .3
5.2 Tensile testing machine .5
6 Test specimen . 5
7 Conditioning . 6
8 Test procedure . 6
9 Calculation of loads and stresses . 6
10 Test report . 8
Annex A (informative)  Example of test fixture for combined stress test . 9
Annex B (informative)  Example of combined stress test on Metal/CFRP adhesive bonded
assembly . 10
Bibliography .12

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 13, Composites
and reinforcement fibres.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
Introduction
This document provides a test method for producing a well-controlled combined stress state in plane-stress
conditions. This methodology can provide an accurate means for evaluating the strength of bonded metal-
composite assemblies that depends only on the interaction between dissimilar adherend, the adhesive,
and the interfaces subjected to various combined loadings. The results can be used to create the failure
envelope for metal-composite assemblies for use in the design optimization of metal-composite assemblies.
[1]
The original fixture was designed to study the shear properties of polymers and later modified to perform
[2],[3]
combined load tests for various materials, including bonded assemblies of dissimilar materials.
This document is intended to provide experimental apparatus, test procedures, and manipulation of the
result for determining the strength of adhesive-bonded metal-CFRP-metal assemblies under combined
loading conditions.
v
International Standard ISO 13094:2025(en)
Composites and reinforcement fibres — Carbon fibre
reinforced plastics (CFRPs) and metal assemblies —
Combined stress test
1 Scope
This document specifies the test method used to determine the strength of the adhesive-bonded carbon fibre
reinforced plastics (CFRP) to metal assemblies under combined loading conditions. The loading fixture, a
standard specimen, and procedure for combined shear and normal load tests under plane stress conditions
are provided. The test method is also applicable to bonded joints between metals and other composite
materials, including glass fibre-reinforced plastics.
This document does not cover specimen preparation of the adhesive joint.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 291, Plastics — Standard atmospheres for conditioning and testing
ISO 7500-1, Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1:
Tension/compression testing machines — Calibration and verification of the force-measuring system
ISO 10365, Adhesives — Designation of main failure patterns
3  Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
applied load
F
force applied in the loading axis that causes simultaneous shear and normal stresses on the bonded area
Note 1 to entry: See Figure 1.
3.2
maximum applied load
F
max
highest value of force observed in the applied load-displacement curve
Note 1 to entry: See Figure 4.

3.3
loading angle
α
angle between the loading axis and
...