Information technology — International Standardized Profiles AMH2n — Message Handling Systems — Interpersonal Messaging — Part 3: AMH22 — IPM Requirements for Message Transfer (P1)

Technologies de l'information — Profils normalisés internationaux AMH2n — Systèmes de messagerie — Messagerie entre personnes — Partie 3: AMH22 — Prescriptions IPM pour transfert de messages (P1)

General Information

Status
Withdrawn
Publication Date
24-Dec-1997
Withdrawal Date
24-Dec-1997
Current Stage
9599 - Withdrawal of International Standard
Completion Date
03-Jul-2003
Ref Project

Relations

Buy Standard

Standard
ISO/IEC ISP 12062-3:1997 - Information technology -- International Standardized Profiles AMH2n -- Message Handling Systems -- Interpersonal Messaging
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARDIZED ISP
PROFILE 12062-3
Second edition
1997-12-15
Information technology — International
Standardized Profiles AMH2n — Message
Handling Systems — Interpersonal
Messaging —
Part 3:
AMH22 — IPM Requirements for Message
Transfer (P1)
Technologies de l'information — Profils normalisés internationaux
AMH2n — Systèmes de messagerie — Messagerie entre personnes —
Partie 3: AMH22 — Prescriptions IPM pour transfert de messages (P1)
Reference number
B C
ISO/IEC ISP 12062-3:1997(E)

---------------------- Page: 1 ----------------------
ISO/IEC ISP 12062-3 : 1997 (E)
Contents
Page
Foreword.iii
Introduction . v
1 Scope. 1
2 Normative references . 2
3 Definitions. 2
4 Abbreviations . 3
5 Conformance . 3
Annexes
A ISPICS Proforma for ISO/IEC ISP 12062-3 (AMH22) . 5
B ISPICS Requirements List for ISO/IEC ISP 12062-3 (AMH22). 9
C Amendments and corrigenda . 11
D Bibliography . 12
© ISO/IEC 1997
All rights reserved. Unless otherwise specified, no part of this publication may be
reproduced or utilized in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without permission in writing from the publisher.
ISO/IEC Copyright Office • Case Postale 56 • CH-1211 Genève 20 • Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
© ISO/IEC ISO/IEC ISP 12062-3 : 1997 (E)
Foreword
ISO (the International Organization for Standardization) and IEC (the
International Electrotechnical Commission) form the specialized system
for worldwide standardization. National bodies that are members of ISO
or IEC participate in the development of International Standards through
technical committees established by the respective organization to deal
with particular fields of technical activity. ISO and IEC technical
committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO
and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a
joint technical committee, ISO/IEC JTC 1. In addition to developing
International Standards, ISO/IEC JTC 1 has created a Special Group on
Functional Standardization for the elaboration of International
Standardized Profiles.
An International Standardized Profile is an internationally agreed,
harmonized document which identifies a standard or group of standards,
together with options and parameters, necessary to accomplish a function
or a set of functions.
Draft International Standardized Profiles are circulated to national bodies
for voting. Publication as an International Standardized Profile requires
approval by at least 75 % of the national bodies casting a vote.
International Standardized Profile ISO/IEC ISP 12062-3 was prepared
with the collaboration of
— OSI Asia-Oceania Workshop (AOW);
— European Workshop for Open Systems (EWOS);
— Open Systems Environment Implementors’ Workshop (OIW).
This second edition cancels and replaces the first edition (ISO/IEC ISP
12062-3:1995), which has been technically revised. It also incorporates
Technical Corrigendum 1:1996.
ISO/IEC ISP 12062 consists of the following parts, under the general title
Information technology - International Standardized Profiles AMH2n -
Message Handling Systems - Interpersonal Messaging:
— Part 1: IPM MHS Service Support
— Part 2: AMH21 - IPM Content
— Part 3: AMH22 - IPM Requirements for Message Transfer (P1)
— Part 4: AMH23 and AMH25 - IPM Requirements for MTS Access (P3)
and MTS 94 Access (P3)
— Part 5: AMH24 - IPM Requirements for Enhanced MS Access (P7)
— Part 6: AMH26 - IPM Requirements for Enhanced MS 94 Access (P7)
iii

---------------------- Page: 3 ----------------------
ISO/IEC ISP 12062-3 : 1997 (E) © ISO/IEC
Annexes A, B and C form an integral part of this part of ISO/IEC ISP
12062. Annex D is for information only.
iv

---------------------- Page: 4 ----------------------
© ISO/IEC ISO/IEC ISP 12062-3 : 1997 (E)
Introduction
This part of ISO/IEC ISP 12062 is defined within the context of Functional
Standardization, in accordance with the principles specified by ISO/IEC
TR 10000, “Framework and Taxonomy of International Standardized
Profiles”. The context of Functional Standardization is one part of the
overall field of Information Technology (IT) standardization activities,
covering base standards, profiles, and registration mechanisms. A profile
defines a combination of base standards that collectively perform a
specific well-defined IT function. Profiles standardize the use of options
and other variations in the base standards, and provide a basis for the
development of uniform, internationally recognized system tests.
One of the most important rôles for an ISP is to serve as the basis for the
development (by organizations other than ISO and IEC) of internationally
recognized tests. ISPs are produced not simply to ‘legitimize’ a particular
choice of base standards and options, but to promote real system
interoperability. The development and widespread acceptance of tests
based on this and other ISPs is crucial to the successful realization of this
goal.
The text for this part of ISO/IEC ISP 12062 was developed in close
cooperation between the MHS Expert Groups of the three Regional
Workshops: the North American OSE Implementors’ Workshop (OIW),
the European Workshop for Open Systems (EWOS) (jointly with the
corresponding expert group of the European Telecommunications
Standards Institute - ETSI) and the OSI Asia-Oceania Workshop (AOW).
This part of ISO/IEC ISP 12062 is harmonized between these three
Workshops and it has been ratified by the plenary assemblies of all three
Workshops.
v

---------------------- Page: 5 ----------------------
© ISO/IEC
INTERNATIONAL STANDARDIZED PROFILE ISO/IEC ISP 12062-3 : 1997 (E)
Information technology – International Standardized
Profiles AMH2n – Message Handling Systems –
Interpersonal Messaging –
Part 3:
AMH22 - IPM Requirements for Message Transfer (P1)
1 Scope
1.1 General
This part of ISO/IEC ISP 12062 covers message transfer between Message Transfer Agents (MTAs) in an
Interpersonal Messaging (IPM) environment using the P1 Message Transfer Protocol (see also figure 1). These
specifications form part of the Interpersonal Messaging application functions, as defined in the parts of ISO/IEC
ISP 12062, and are based on the Common Messaging content type-independent specifications in ISO/IEC ISP
10611.
1.2 Position within the taxonomy
This part of ISO/IEC ISP 12062 is the third part of a multipart ISP identified in ISO/IEC TR 10000-2 as “AMH2,
Message Handling Systems - Interpersonal Messaging”.
This part of ISO/IEC ISP 12062 specifies the following profile:
AMH22 - IPM Requirements for Message Transfer (P1)
The AMH22 profile may be combined with any T-Profiles (see ISO/IEC TR 10000) specifying the OSI
connection-mode Transport service.
1.3 Scenario
The model used is one of two or more MTAs intercommunicating within a Message Transfer System (MTS)
using the P1 protocol, as shown in figure 1.
P1
P1
MTA MTA MTA
Figure 1 - AMH22 scenario
NOTE - In an ITU-T context, a domain may be treated as an MTA for the purposes of conformance to the AMH22 profile.
The AMH22 profile covers all aspects of the MTA Abstract Service, as defined in clause 12 of ISO/IEC 10021-4,
when realized using the P1 protocol in an IPM environment.
The OSI upper layer services and protocols to support the Message Handling Systems functions covered by the
AMH22 profile are specified in subclause 1.3 of ISO/IEC ISP 10611-3.
1

---------------------- Page: 6 ----------------------
ISO/IEC ISP 12062-3 : 1997 (E) © ISO/IEC
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this
part of ISO/IEC ISP 12062. At the time of publication, the editions indicated were valid. All documents are
subject to revision, and parties to agreements based on this part of ISO/IEC ISP 12062 are warned against
automatically applying any more recent editions of the documents listed below, since the nature of references
made by ISPs to such documents is that they may be specific to a particular edition. Members of IEC and ISO
maintain registers of currently valid International Standards and ISPs, and the Telecommunications
Standardization Bureau of the ITU maintains a list of currently valid ITU-T Recommendations.
Amendments and corrigenda to the base standards referenced are listed in annex C.
NOTES
1 - References in the body of this part of ISO/IEC ISP 12062 to specific clauses of ISO/IEC documents shall be considered
to refer also to the corresponding clauses of the equivalent ITU-T Recommendations (as noted below) unless otherwise
stated.
2 - Informative references are found in annex D.
1)
ISO/IEC TR 10000-1:— , Information technology - Framework and taxonomy of International Standardized Profiles - Part 1:
General principles and documentation framework.
1)
ISO/IEC TR 10000-2:— , Information technology - Framework and taxonomy of International Standardized Profiles - Part 2:
Principles and Taxonomy for OSI profiles.
ITU-T Recommendation F.400/X.400 (1996), Message Handling Systems - System and service overview.
2)
ISO/IEC 10021-1:— , Information technology - Message Handling Systems (MHS): System and service overview
[see also ITU-T Recommendation F.400/X.400].
ITU-T Recommendation X.402 (1995) | ISO/IEC 10021-2: 1996, Information technology - Message Handling Systems
(MHS): Overall architecture.
ITU-T Recommendation X.411 (1995) | ISO/IEC 10021-4: 1997, Information technology - Message Handling Systems
(MHS): Message transfer system: Abstract service definition and procedures.
ITU-T Recommendation X.419 (1995) | ISO/IEC 10021-6: 1996, Information technology - Message Handling Systems
(MHS): Protocol specifications.
ISO/IEC ISP 10611-3: 1997, Information technology - International Standardized Profiles AMH1n - Message Handling
Systems - Common Messaging - Part 3: AMH11 - Message Transfer (P1).
ISO/IEC ISP 12062-1: 1997, Information technology - International Standardized Profiles AMH2n - Message Handling
Systems - Interpersonal Messaging - Part 1: IPM MHS Service Support.
3 Definitions
For the purposes of this part of ISO/IEC ISP 12062, the following definitions apply.
Terms used in this part of ISO/IEC ISP 12062 are defined in the referenced base standards; in addition, the
following terms are defined.

1) To be published. (Revision of ISO/IEC TR 10000:1995)
2) To be published. (Revision of ISO/IEC 10021-1:1990)
2

---------------------- Page: 7 ----------------------
© ISO/IEC ISO/IEC ISP 12062-3 : 1997 (E)
3.1 General
3.1.1 Basic requirement: an Element of Service, protocol element, procedural element or other identifiable
feature specified in the base standards which is required to be supported by all MHS implementations.
3.1.2 Functional group: a specification of one or more related Elements of Service, protocol elements,
procedural elements or other identifiable features specified in the base standards which together support a
significant optional area of MHS functionality.
NOTE - A functional group can cover any combination of MHS features specified in the base standards for which the effect
of implementation can be determined at a standardized external interface - i.e. via a standard OSI communications protocol
(other forms of exposed interface, such as a standardized programmatic interface, are outside the scope of this version of
ISO/IEC ISP 12062).
3.2 Support classification
To specify the support level of arguments, results and other protocol features for this part of ISO/IEC ISP 12062,
the following terminology is defined.
NOTE - No classifications are used in this part of ISO/IEC ISP 12062, as the requirements for support of arguments, results
and other protocol features by an MTA are as specified in ISO/IEC ISP 10611-3.
4 Abbreviations
84IW 84 Interworking
AMH Application Message Handling
CV Conversion
DIR Use of Directory
DL Distribution List
FG Functional group
IPM Interpersonal Messaging
ISP International Standardized Profile
LD Latest Delivery
MHS Message Handling Systems
MS Message store
MT Message transfer
MTA Message transfer agent
MTS Message Transfer System
OSI Open Systems Interconnection
PD Physical Delivery
RED Redirection
RoC Return of Content
SEC Security
UA User agent
5 Conformance
This part of ISO/IEC ISP 12062 states requirements upon implementations to achieve interworking. A claim of
conformance to this part of ISO/IEC ISP 12062 is a claim that all requirements in the relevant base standards
are satisfied, and that all requirements in the following clauses and in annexes A and B of this part of ISO/IEC
ISP 12062 are satisfied.
5.1 Conformance statement
For each implementation claiming conformance to profile AMH22 as specified in this part of ISO/IEC ISP 12062,
a PICS shall be made available stating support or non-support of each option identified in this part of ISO/IEC
ISP 12062.
3

---------------------- Page: 8 ----------------------
ISO/IEC ISP 12062-3 : 1997 (E) © ISO/IEC
The scope of conformance to profile AMH22 is restricted to MTAs that support message transfer. A claim of
conformance to profile AMH22 shall confirm that the implem
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.