ISO 13709:2009

Centrifugal pumps for petroleum, petrochemical and natural gas industries

ISO 13709:2009 specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. ISO 13709:2009 is applicable to overhung pumps, between-bearings pumps and vertically-suspended pumps

Pompes centrifuges pour les industries du pétrole, de la pétrochimie et du gaz naturel

L'ISO 13709:2009 spécifie des exigences pour les pompes centrifuges, y compris les pompes à fonctionnement inversé telles que les turbines hydrauliques de récupération d'énergie, destinées à servir dans les services de traitement des industries du pétrole, de la pétrochimie et du gaz naturel. L'ISO 13709:2009 est applicable aux pompes en porte-à-faux, aux pompes montées entre paliers et aux pompes suspendues verticalement.

General Information

• Status: Published
• Publication Date: 07-Dec-2009
• ICS: 71.120.99 - Other equipment for the chemical industry
• ICS: 75.180.20 - Processing equipment
• Technical Committee: ISO/TC 115/SC 3 - Installation and special application
• Drafting Committee: ISO/TC 115/SC 3 - Installation and special application
• Parallel Committee: ISO/TC 67 - Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
• Current Stage: 9093 - International Standard confirmed
• Start Date: 11-Jun-2021
• Completion Date: 13-Dec-2025

Relations

• Revises: ISO 13709:2003 - Centrifugal pumps for petroleum, petrochemical and natural gas industries
• Effective Date: 15-Apr-2008

Overview

ISO 13709:2009 is an international standard that specifies requirements for centrifugal pumps used in the petroleum, petrochemical and natural gas industries. This second edition (2009) replaces the 2003 edition and applies to common industrial configurations including overhung pumps, between‑bearings pumps and vertically‑suspended pumps. The standard also covers pumps operated in reverse as hydraulic power recovery turbines. The published package includes datasheets in SI and USC units to support specification and procurement.

Key topics

ISO 13709:2009 defines the essential requirements and supporting documentation that end users and manufacturers use to ensure safe, reliable pump performance in hydrocarbon process services. Major technical topics typically addressed include:

• Scope and applicability for petroleum, petrochemical and natural gas process services
• Pump types covered: overhung, between‑bearings, vertically‑suspended, and reverse‑operated units (power recovery)
• Design and construction requirements to meet process and safety needs
• Performance and testing expectations, and acceptance criteria
• Materials and corrosion considerations suitable for hydrocarbon service environments
• Installation, operation and maintenance guidance and recommended documentation
• Standardized datasheets (supplied in SI and USC units) for consistent specification and procurement

(Notes: The standard package includes datasheets and electronic inserts to facilitate specification workflows.)

Applications

ISO 13709:2009 is intended for any application requiring robust centrifugal pumping solutions in hydrocarbon processing, including:

• Crude oil and refined product transfer systems
• Petrochemical process loops and feed systems
• Gas processing and compression support systems
• Pumping trains where energy recovery via reverse operation is desirable
• New equipment procurement, retrofit projects and life‑cycle asset management

Using ISO 13709 helps ensure compatibility between vendors, consistent procurement specifications, and reduced operational risk in critical hydrocarbon services.

Who uses this standard

• Pump manufacturers and OEMs designing industrial centrifugal pumps
• Process, rotating‑equipment and mechanical engineers specifying pump packages
• Procurement and contract managers preparing tender documents and datasheets
• Maintenance and reliability teams verifying acceptance tests and inspection criteria
• Safety and compliance officers ensuring equipment meets recognized industry requirements

Related standards

ISO 13709 belongs to the family of industrial rotating‑equipment and piping standards used in upstream, midstream and downstream hydrocarbon sectors. When specifying equipment, users commonly reference ISO 13709 alongside other ISO or industry standards for piping, materials, electrical installation and testing to create a complete equipment specification.

Keywords: ISO 13709:2009, centrifugal pumps, petroleum pumps, petrochemical pumps, natural gas pumps, hydraulic power recovery turbines, overhung pumps, between‑bearings pumps, vertically‑suspended pumps, pump datasheet.

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 13709
Second edition
2009-12-15
Centrifugal pumps for petroleum,
petrochemical and natural gas industries
Pompes centrifuges pour les industries du pétrole, de la pétrochimie et
du gaz naturel
Reference number
©
ISO 2009
PDF disclaimer
PDF files may contain embedded typefaces. In accordance with Adobe's licensing policy, such files may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading a PDF file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create the PDF file(s) constituting this document can be found in the General Info relative to
the file(s); the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the files are suitable for
use by ISO member bodies. In the unlikely event that a problem relating to them is found, please inform the Central Secretariat at the
address given below.
This CD-ROM contains:
1) the publication ISO 13709:2009(E) (including the datasheets) in portable document format (PDF),
which can be viewed using Adobe® Acrobat® Reader;
2) a separate folder (electronic inserts) containing the datasheets (in either SI or USC units).

Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
This second edition cancels and replaces the first edition (ISO 13709:2003), which has been technically
revised.
©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this CD-ROM may be reproduced, stored in a retrieval system or transmitted in
any form or by any means without prior permission from ISO. Requests for permission to reproduce this product should be addre
...

NORME ISO
INTERNATIONALE 13709
Deuxième édition
2009-12-15
Pompes centrifuges pour les industries
du pétrole, de la pétrochimie et du gaz
naturel
Centrifugal pumps for petroleum, petrochemical and natural gas
industries
Numéro de référence
©
ISO 2009
PDF – Exonération de responsabilité
Les fichiers PDF peuvent contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ils peuvent
être imprimés ou visualisés, mais ne doivent pas être modifiés à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de fichiers PDF, les parties
concernées acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO
décline toute responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du ou des fichiers PDF qui constituent cette publication sont
disponibles dans la rubrique General Info des fichiers; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les
mesures ont été prises pour garantir l'exploitation de ces fichiers par les comités membres de l'ISO. Dans le cas peu probable où
surviendrait un problème d'utilisation, veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.

Le présent CD-ROM contient:
1) la publication ISO 13709:2009 au format PDF (portable document format), qui peut être visualisée
en utilisant Adobe® Acrobat® Reader;
2) un fichier séparé (inserts électroniques) contenant les feuilles de données en anglais (soit en
unités SI, soit en unités US).
Adobe et Acrobat sont des marques déposées de Adobe Systems Incorporated.

DOCUMENT PROTÉGÉ PAR COPYRIGHT

©  ISO 2009
Tous droits réservés. Sauf exigence particulière d'installation et sauf stipulation contraire, aucune partie de ce CD-ROM ne peut être
reproduite, enregistrée dans un système d'extraction ou transmise, sous quelque forme que ce soit et par aucun procédé, sans l'accord
préalable de l'ISO. Les demandes d'autorisation de reproduction de ce produit doivent être envoyée
...