ISO 10303-232:2002

Industrial automation systems and integration — Product data representation and exchange — Part 232: Application protocol: Technical data packaging core information and exchange

This part of ISO 10303 specifies the use of the integrated resources necessary for the scope and information requirements for Technical Data Packages (TDPs) (see 3.5.28) to be exchanged among product data management systems. Each enterprise uses content, format, and the level of configuration control as parameters when establishing its product exchange or access requirements among business partners. Because of the diverse set of products, product data, and lifecycle processes PDM systems support, this part of ISO 10303 allows many combinations of these parameters and their values. Using a defined set of these parameters, the disclosure of product information needs to be sufficient to satisfy the business purpose of the TDP. NOTE 1 TDPs may be prepared to a level where the product information is sufficient to evaluate a product definition concept. Or a TDP may be prepared to a level where the product information is sufficient to enable full design disclosure (see 3.5.9). Requirements for this part of ISO 10303 were derived from functions that create and use TDPs and reside throughout the product's life cycle. The key informational aspects addressed in this part of ISO 10303 are shared and exchanged throughout the product's life cycle. NOTE 2 Within a product's life cycle, there are many functions that create and use the technical information about a product. Figure 3 illustrates the functional usage of technical data within each life cycle phase of a product. The largest percentage of the technical data is developed in the concept development, concept and validation, and product and process development lifecycle phases. The operations and support lifecycle phase, for most products or commodities, is the longest and is impacted the greatest by the quality and usability of the TDP information. The production lifecycle phase typically has the second largest usage of the information contained within the TDP. In the production and product process development lifecycle phase, TDP data is used to build and deliver the product. NOTE 3 The application activity model in annex F provides a graphical representation of the processes and information flows that are the basis for the definition of the scope of this part of ISO 10303. Figure 3 -- Functional usage of technical data EXAMPLE 1 The following represent different types of Technical Data Packages through a product's life cycle: Conceptual Design Drawings and Associated Lists; Developmental Design Drawings and Associated Lists; Product Drawings and Associated Lists; Commercial Drawings and Associated Lists; Special Inspection Equipment Drawings and Associated Lists; Special Tooling Drawings and Associated Lists. NOTE 4 Definitions for the preceding types of TDPs are given in Clause 3.5. The content, form, and format of the data are critical to the core information content for exchange or access of the TDP. The following are within the scope of this part of ISO 10303: All products and their commodity types; NOTE 5 This part of ISO 10303 is defined independently of product or commodity. -- Product definition data and product configuration control data pertaining to the concept development, concept and validation, product and process development, production, operations and support, and retirement phases of a product (herein called the product life cycle); NOTE 6 ISO 10303 standards are referenced throughout the documentation of the requirements of this part of ISO 10303. This part utilizes ISO 10303 standards through the use of application interpreted constructs. Relationship of the product to a technical data package element (see 3.5.27); Identification of drawings related to the product that require configuration control, exchange, or access; The data content requirements for parts lists, data lists, index lists, indentured data lists, and other associated lists that are associated to a drawing or a product data set (see 3.5 for definitions); The data content requirem

Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 232: Protocole d'application: Information centrale et échange de paquetage de données techniques

General Information

• Status: Published
• Publication Date: 19-Jun-2002
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: ISO/TC 184/SC 4 - Industrial data
• Drafting Committee: ISO/TC 184/SC 4/WG 12 - STEP product modelling and resources
• Current Stage: 9020 - International Standard under periodical review
• Start Date: 15-Oct-2024
• Completion Date: 15-Oct-2024

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 10303-232
First edition
2002-06-01
Industrial automation systems and
integration — Product data representation
and exchange —
Part 232:
Application protocol: Technical data
packaging core information and exchange
Systèmes d'automatisation industrielle et intégration — Représentation et
échange de données de produits —
Partie 232: Protocole d'application: Information centrale et échange de
paquetage de données techniques
Reference number
©
ISO 2002
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
This CD-ROM contains the publication ISO 10303-232 in portable document format (PDF), which can be viewed
using Adobe® Acrobat® Read
...

INTERNATIONAL ISO
STANDARD 10303-232
First edition
2002-06-01
Industrial automation systems and
integration — Product data representation
and exchange —
Part 232:
Application protocol: Technical data
packaging core information and exchange
Systèmes d'automatisation industrielle et intégration — Représentation et
échange de données de produits —
Partie 232: Protocole d'application: Information centrale et échange de
paquetage de données techniques
Reference number
©
ISO 2002
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
This CD-ROM contains the publication ISO 10303-232 in portable document format (PDF), which can be viewed
using Adobe® Acrobat® Read
...

INTERNATIONAL ISO
STANDARD 10303-232
First edition
2002-06-01
Industrial automation systems and
integration — Product data representation
and exchange —
Part 232:
Application protocol: Technical data
packaging core information and exchange
Systèmes d'automatisation industrielle et intégration — Représentation et
échange de données de produits —
Partie 232: Protocole d'application: Information centrale et échange de
paquetage de données techniques

Reference number
©
ISO 2002
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2002 – All rights reserved

Contents Page
1  Scope . 1

2 Normative references . 4
3 Terms, definitions, and abbreviations . 7
3.1 Terms defined in ISO 10303-1 . 7
3.2 Terms defined in ISO 10303-31 . 8
3.3 Terms defined in ISO 10303-42 . 8
3.4 Terms defined in ISO 10303-203 . 9
3.5 Other terms and definitions . 10
3.6 Abbreviations . 14
4 Information requirements . 15
4.1 Units of functionality . 16
4.1.1 data_definition_exchange . 26
4.1.2 data_list . 31
4.1.3 drawing . 34
4.1.4 indentured_data_list . 36
4.1.5 index_list . 40
4.1.6 other_list . 42
4.1.7 parts_list . 45
4.1.8 presentation . 49
4.1.9 product_data_set . 51
4.1.10 reference_document . 54
4.2 Application objects . 55
4.3 Application assertions . 239
5 Application interpreted model . 310
5.1 Mapping table . 310
5.2 AIM EXPRESS short listing . 939
6 Conformance requirements . 1018
6.1 Data definition exchange for files, conformance class 1 . 1021
6.2 Data definition exchange for TDP elements, conformance class 2 . 1021
6.3 Data definition exchange for indentured methods, conformance class 3 . 1021
6.4 Parts list, conformance class 4 . 1021
6.5 Data list, conformance class 5 . 1021
6.6 Indentured data list, conformance class 6 . 1022
6.7 Index list, conformance class 7 . 1022
6.8 Other list, conformance class 8 . 1022
6.9 List with presentation, conformance class 9 . 1022
6.10 Reference document identification and drawing identification, Conformance Class 10 . 1022
6.11 Reference document identification and drawing identification with ISO 10303-201 and
ISO 10303-202 drawing presentation identification, Conformance Class 11 . 1023
6.12 Product data set (PDS) without presentation format, Conformance Class 12 . 1023
6.13 Product data set (PDS) with shading, conformance class 13 . 1024
6.14 Product data set (PDS) with presentation format, conformance class 14 . 1024
Annex A (normative) AIM EXPRESS expanded listing . 1045
Annex B (normative) AIM short names of entities . 1206
Annex C (normative) Implementation method specific requirements . 1219
Annex D (normative) Protocol implementation conformance statement (PICS) proforma . 1223
Annex E (normative) Information object registration . 1225
E.1 Document identification . 1225
E.2 Schema identification . 1225
Annex F (informative) Application activity model . 1226
F.1 Application activity model definitions . 1227
F.2 Application activity model abbreviations . 1248
F.3 Application activity model diagrams . 1250
Annex G (informative) Application reference model . 1268
Annex H (informative) AIM EXPRESS-G . 1306
Annex J (informative) Computer-interpretable listings . 1373
Annex K (informative) Usage Scenarios . 1374
K.1 Information exchange scenarios . 1374
K.2 Definitions and levels of capability for the parts list . 1381
K.3 Definitions and levels of capability for the data list . 1402
K.4 Definitions and levels of capability for the index list . 1417
K.5 Definitions and levels of capability for the Data Definition Exchange . 1429
K.6 Definitions and levels of capability for the indentured data list . 1455
Bibliography . 1479
Index . 1480
Figures
Figure 1 — PDM information area ISO 10303-232 addresses . xi
Figure 2 — High level planning model . xii
Figure 3 — Functional usage of technical data . 2
Figure 4 — Format style for date . 70
Figure 5 — Graphics utilized in presenting a tabulated listing . 179
Figure 6 — Page anchor location . 180
Figure 7 — Standard cross sections . 225
Figure C.1 — Exchange structure without ISO 10303-201 or ISO 10303-202 . 1220
Figure C.2 — Exchange structure with ISO 10303-505 as sheet . 1221
Figure C.3 — Exchange structure with ISO 10303-505 as drawing . 1222
iv © ISO 2002 – All rights reserved

Figure F.1 — A-0: develop, procure, build, use, and maintain a product . 1251
Figure F.2 — A0: develop, procure, build, use, and maintain a product . 1252
Figure F.3 — A2: manage, design, and support a product . 1253
Figure F.4 — A22: design and analyze a product . 1254
Figure F.5 — A223: perform product detail and design analysis . 1255
Figure F.6 — A2232: create detail product design . 1256
Figure F.7 — A22323: prepare product models and drawings . 1257
Figure F.8 — A223232: create product layouts and models . 1258
Figure F.9 — A223233: create product drawing data . 1259
Figure F.10 — A2232332: prepare detail product item drawings . 1260
Figure F.11 — A22324: build product associated lists . 1261
Figure F.12 — A24: prepare product data for use . 1262
Figure F.13 — A3: use and maintain a product . 1263
Figure F.14 — A33: support product . 1264
Figure F.15 — A331: spares procurement . 1265
Figure F.16 — A223: local manufacture . 1266
Figure F.17 — A333: develop modifications . 1267
Figure G.1 — ARM diagram (1 of 33) . 1273
Figure G.2 — ARM diagram (2 of 33) . 1274
Figure G.3 — ARM diagram (3 of 33) . 1275
Figure G.4 — ARM diagram (4 of 33) . 1276
Figure G.5 — ARM diagram (5 of 33) . 1277
Figure G.6 — ARM diagram (6 of 33) . 1278
Figure G.7 — ARM diagram (7 of 33) . 1279
Figure G.8 — ARM diagram (8 of 33) . 1280
Figure G.9 — ARM diagram (9 of 33) . 1281
Figure G.10 — ARM diagram (10 of 33) . 1282
Figure G.11 — ARM diagram (11 of 33) . 1283
Figure G.12 — ARM diagram (12 of 33) . 1284
Figure G.13 — ARM diagram (13 of 33) . 1285
Figure G.14 — ARM diagram (14 of 33) . 1286
Figure G.15 — ARM diagram (15 of 33) . 1287
Figure G.16 — ARM diagram (16 of 33) . 1288
Figure G.17 — ARM diagram (17 of 33) . 1289
Figure G.18 — ARM diagram (18 of 33) . 1290
Figure G.19 — ARM diagram (19 of 33) . 1291
Figure G.20 — ARM diagram (20 of 33) . 1292
Figure G.21 — ARM diagram (21 of 33) . 1293
Figure G.22 — ARM diagram (22 of 33) . 1294
Figure G.23 — ARM diagram (23 of 33) . 1295
Figure G.24 — ARM diagram (24 of 33) . 1296
Figure G.25 — ARM diagram (25 of 33) . 1297
Figure G.26 — ARM diagram (26 of 33) . 1298
Figure G.27 — ARM diagram (27 of 33) . 1299
Figure G.28 — ARM diagram (28 of 33) . 1300
Figure G.29 — ARM diagram (29 of 33) . 1301
Figure G.30 — ARM diagram (30 of 33) . 1302
Figure G.31 — ARM diagram (31 of 33) . 1303
Figure G.32 — ARM diagram (32 of 33) . 1304
Figure G.33 — ARM diagram (33 of 33) . 1305
Figure H.1 — AIM EXPRESS-G diagram (1 of 66) . 1307
Figure H.2 — AIM EXPRESS-G diagram (2 of 66) . 1308
Figure H.3 — AIM EXPRESS-G diagram (3 of 66) . 1309
Figure H.4 — AIM EXPRESS-G diagram (4 of 66) . 1310
Figure H.5 — AIM EXPRESS-G diagram (5 of 66) . 1311
Figure H.6 — AIM EXPRESS-G diagram (6 of 66) . 1312
Figure H.7 — AIM EXPRESS-G diagram (7 of 66) . 1313
Figure H.8 — AIM EXPRESS-G diagram (8 of 66) . 1314
Figure H.9 — AIM EXPRESS-G diagram (9 of 66) . 1315
Figure H.10 — AIM EXPRESS-G diagram (10 of 66) . 1316
Figure H.11 — AIM EXPRESS-G diagram (11 of 66) . 1317
Figure H.12 — AIM EXPRESS-G diagram (12 of 66) . 1318
Figure H.13 — AIM EXPRESS-G diagram (13 of 66) . 1319
Figure H.14 — AIM EXPRESS-G diagram (14 of 66) . 1320
Figure H.15 — AIM EXPRESS-G diagram (15 of 66) . 1321
Figure H.16 — AIM EXPRESS-G diagram (16 of 66) . 1322
Figure H.17 — AIM EXPRESS-G diagram (17 of 66) . 1323
Figure H.18 — AIM EXPRESS-G diagram (18 of 66) . 1324
Figure H.19 — AIM EXPRESS-G diagram (19 of 66) . 1325
Figure H
...

INTERNATIONAL ISO
STANDARD 10303-232
First edition
2002-06-01
Industrial automation systems and
integration — Product data representation
and exchange —
Part 232:
Application protocol: Technical data
packaging core information and exchange
Systèmes d'automatisation industrielle et intégration — Représentation et
échange de données de produits —
Partie 232: Protocole d'application: Information centrale et échange de
paquetage de données techniques

Reference number
©
ISO 2002
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2002 – All rights reserved

Contents Page
1  Scope . 1

2 Normative references . 4
3 Terms, definitions, and abbreviations . 7
3.1 Terms defined in ISO 10303-1 . 7
3.2 Terms defined in ISO 10303-31 . 8
3.3 Terms defined in ISO 10303-42 . 8
3.4 Terms defined in ISO 10303-203 . 9
3.5 Other terms and definitions . 10
3.6 Abbreviations . 14
4 Information requirements . 15
4.1 Units of functionality . 16
4.1.1 data_definition_exchange . 26
4.1.2 data_list . 31
4.1.3 drawing . 34
4.1.4 indentured_data_list . 36
4.1.5 index_list . 40
4.1.6 other_list . 42
4.1.7 parts_list . 45
4.1.8 presentation . 49
4.1.9 product_data_set . 51
4.1.10 reference_document . 54
4.2 Application objects . 55
4.3 Application assertions . 239
5 Application interpreted model . 310
5.1 Mapping table . 310
5.2 AIM EXPRESS short listing . 939
6 Conformance requirements . 1018
6.1 Data definition exchange for files, conformance class 1 . 1021
6.2 Data definition exchange for TDP elements, conformance class 2 . 1021
6.3 Data definition exchange for indentured methods, conformance class 3 . 1021
6.4 Parts list, conformance class 4 . 1021
6.5 Data list, conformance class 5 . 1021
6.6 Indentured data list, conformance class 6 . 1022
6.7 Index list, conformance class 7 . 1022
6.8 Other list, conformance class 8 . 1022
6.9 List with presentation, conformance class 9 . 1022
6.10 Reference document identification and drawing identification, Conformance Class 10 . 1022
6.11 Reference document identification and drawing identification with ISO 10303-201 and
ISO 10303-202 drawing presentation identification, Conformance Class 11 . 1023
6.12 Product data set (PDS) without presentation format, Conformance Class 12 . 1023
6.13 Product data set (PDS) with shading, conformance class 13 . 1024
6.14 Product data set (PDS) with presentation format, conformance class 14 . 1024
Annex A (normative) AIM EXPRESS expanded listing . 1045
Annex B (normative) AIM short names of entities . 1206
Annex C (normative) Implementation method specific requirements . 1219
Annex D (normative) Protocol implementation conformance statement (PICS) proforma . 1223
Annex E (normative) Information object registration . 1225
E.1 Document identification . 1225
E.2 Schema identification . 1225
Annex F (informative) Application activity model . 1226
F.1 Application activity model definitions . 1227
F.2 Application activity model abbreviations . 1248
F.3 Application activity model diagrams . 1250
Annex G (informative) Application reference model . 1268
Annex H (informative) AIM EXPRESS-G . 1306
Annex J (informative) Computer-interpretable listings . 1373
Annex K (informative) Usage Scenarios . 1374
K.1 Information exchange scenarios . 1374
K.2 Definitions and levels of capability for the parts list . 1381
K.3 Definitions and levels of capability for the data list . 1402
K.4 Definitions and levels of capability for the index list . 1417
K.5 Definitions and levels of capability for the Data Definition Exchange . 1429
K.6 Definitions and levels of capability for the indentured data list . 1455
Bibliography . 1479
Index . 1480
Figures
Figure 1 — PDM information area ISO 10303-232 addresses . xi
Figure 2 — High level planning model . xii
Figure 3 — Functional usage of technical data . 2
Figure 4 — Format style for date . 70
Figure 5 — Graphics utilized in presenting a tabulated listing . 179
Figure 6 — Page anchor location . 180
Figure 7 — Standard cross sections . 225
Figure C.1 — Exchange structure without ISO 10303-201 or ISO 10303-202 . 1220
Figure C.2 — Exchange structure with ISO 10303-505 as sheet . 1221
Figure C.3 — Exchange structure with ISO 10303-505 as drawing . 1222
iv © ISO 2002 – All rights reserved

Figure F.1 — A-0: develop, procure, build, use, and maintain a product . 1251
Figure F.2 — A0: develop, procure, build, use, and maintain a product . 1252
Figure F.3 — A2: manage, design, and support a product . 1253
Figure F.4 — A22: design and analyze a product . 1254
Figure F.5 — A223: perform product detail and design analysis . 1255
Figure F.6 — A2232: create detail product design . 1256
Figure F.7 — A22323: prepare product models and drawings . 1257
Figure F.8 — A223232: create product layouts and models . 1258
Figure F.9 — A223233: create product drawing data . 1259
Figure F.10 — A2232332: prepare detail product item drawings . 1260
Figure F.11 — A22324: build product associated lists . 1261
Figure F.12 — A24: prepare product data for use . 1262
Figure F.13 — A3: use and maintain a product . 1263
Figure F.14 — A33: support product . 1264
Figure F.15 — A331: spares procurement . 1265
Figure F.16 — A223: local manufacture . 1266
Figure F.17 — A333: develop modifications . 1267
Figure G.1 — ARM diagram (1 of 33) . 1273
Figure G.2 — ARM diagram (2 of 33) . 1274
Figure G.3 — ARM diagram (3 of 33) . 1275
Figure G.4 — ARM diagram (4 of 33) . 1276
Figure G.5 — ARM diagram (5 of 33) . 1277
Figure G.6 — ARM diagram (6 of 33) . 1278
Figure G.7 — ARM diagram (7 of 33) . 1279
Figure G.8 — ARM diagram (8 of 33) . 1280
Figure G.9 — ARM diagram (9 of 33) . 1281
Figure G.10 — ARM diagram (10 of 33) . 1282
Figure G.11 — ARM diagram (11 of 33) . 1283
Figure G.12 — ARM diagram (12 of 33) . 1284
Figure G.13 — ARM diagram (13 of 33) . 1285
Figure G.14 — ARM diagram (14 of 33) . 1286
Figure G.15 — ARM diagram (15 of 33) . 1287
Figure G.16 — ARM diagram (16 of 33) . 1288
Figure G.17 — ARM diagram (17 of 33) . 1289
Figure G.18 — ARM diagram (18 of 33) . 1290
Figure G.19 — ARM diagram (19 of 33) . 1291
Figure G.20 — ARM diagram (20 of 33) . 1292
Figure G.21 — ARM diagram (21 of 33) . 1293
Figure G.22 — ARM diagram (22 of 33) . 1294
Figure G.23 — ARM diagram (23 of 33) . 1295
Figure G.24 — ARM diagram (24 of 33) . 1296
Figure G.25 — ARM diagram (25 of 33) . 1297
Figure G.26 — ARM diagram (26 of 33) . 1298
Figure G.27 — ARM diagram (27 of 33) . 1299
Figure G.28 — ARM diagram (28 of 33) . 1300
Figure G.29 — ARM diagram (29 of 33) . 1301
Figure G.30 — ARM diagram (30 of 33) . 1302
Figure G.31 — ARM diagram (31 of 33) . 1303
Figure G.32 — ARM diagram (32 of 33) . 1304
Figure G.33 — ARM diagram (33 of 33) . 1305
Figure H.1 — AIM EXPRESS-G diagram (1 of 66) . 1307
Figure H.2 — AIM EXPRESS-G diagram (2 of 66) . 1308
Figure H.3 — AIM EXPRESS-G diagram (3 of 66) . 1309
Figure H.4 — AIM EXPRESS-G diagram (4 of 66) . 1310
Figure H.5 — AIM EXPRESS-G diagram (5 of 66) . 1311
Figure H.6 — AIM EXPRESS-G diagram (6 of 66) . 1312
Figure H.7 — AIM EXPRESS-G diagram (7 of 66) . 1313
Figure H.8 — AIM EXPRESS-G diagram (8 of 66) . 1314
Figure H.9 — AIM EXPRESS-G diagram (9 of 66) . 1315
Figure H.10 — AIM EXPRESS-G diagram (10 of 66) . 1316
Figure H.11 — AIM EXPRESS-G diagram (11 of 66) . 1317
Figure H.12 — AIM EXPRESS-G diagram (12 of 66) . 1318
Figure H.13 — AIM EXPRESS-G diagram (13 of 66) . 1319
Figure H.14 — AIM EXPRESS-G diagram (14 of 66) . 1320
Figure H.15 — AIM EXPRESS-G diagram (15 of 66) . 1321
Figure H.16 — AIM EXPRESS-G diagram (16 of 66) . 1322
Figure H.17 — AIM EXPRESS-G diagram (17 of 66) . 1323
Figure H.18 — AIM EXPRESS-G diagram (18 of 66) . 1324
Figure H.19 — AIM EXPRESS-G diagram (19 of 66) . 1325
Figure H
...