ISO 2230:2002

Rubber products — Guidelines for storage

This International Standard give guidelines for the inspection, recording procedures, packaging and storage of products, assemblies and components made from vulcanized or thermoplastic rubber prior to being put into circulation. It is applicable to both solid and cellular rubber products prepared from dry raw rubber, latex or other sources. It is subject only to the requirements or recommendations of product specifications in which details of storage requirements for specific products are given. This standard is not intended for use with raw rubber in bale, liquid (solution or emulsion) or particulate form, storage guidance for which is given in ISO 7664. The recommendations for packaging form an integral part of the controlled storage procedure, as well as providing means of identifying the material and product.

Produits à base d'élastomères — Lignes directrices pour le stockage

Gumeni proizvodi – Smernice za skladiščenje

General Information

• Status: Published
• Publication Date: 24-Apr-2002
• ICS: 83.060 - Rubber
• Technical Committee: ISO/TC 45/SC 4 - Products (other than hoses)
• Drafting Committee: ISO/TC 45/SC 4 - Products (other than hoses)
• Current Stage: 9092 - International Standard to be revised
• Completion Date: 04-Mar-2024
• Ref Project: SIST ISO 2230:2003 - Rubber products -- Guidelines for storage

Relations

• Revises: ISO 2230:1973 - Vulcanized rubber — Guide to storage
• Effective Date: 15-Apr-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produits à base d'élastomères -- Lignes directrices pour le stockageRubber products -- Guidelines for storage83.060GumaRubberICS:Ta slovenski standard je istoveten z:ISO 2230:2002SIST ISO 2230:2003en01-julij-2003SIST ISO 2230:2003SLOVENSKI
STANDARD



SIST ISO 2230:2003



INTERNATIONALSTANDARDISO2230Second edition2002-04-15Reference numberISO2230:2002(E)© ISO2002Rubber products— Guidelines for storageProduits à base d'élastomères— Lignes directrices pour le stockage
SIST ISO 2230:2003



ISO2230:2002(E)ii© ISO2002–All rights reservedPDF disclaimerThis PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not beedited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.Adobe is a trademark of Adobe Systems Incorporated.Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameterswere optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely eventthat a problem relating to it is found, please inform the Central Secretariat at the address given below.©ISO2002All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO'smember body in the country of the requester.ISO copyright officeCase postale 56  CH-1211 Geneva 20Tel.+ 41 22 749 01 11Fax+ 41 22 749 09 [e-mail] in SwitzerlandSIST ISO 2230:2003



ISO2230:2002(E)© ISO2002–All rights reservediiiContents Page1Scope . 12Normative references . 13Terms and definitions . 14Classification of rubber types according to their relative susceptibility to deterioration . 25Packaging . 46Storage . 57Inspection, testing and recording of data during storage . 7AnnexARecommendations for inspection and testing of specific products. 10Bibliography. 11SIST ISO 2230:2003



ISO2230:2002(E)iv© ISO2002–All rights reservedForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISOmember bodies). The work of preparing International Standards is normally carried out through ISO technicalcommittees. Each member body interested in a subject for which a technical committee has been established hasthe right to be represented on that committee. International organizations, governmental and non-governmental, inliaison with ISO, also take part in the work. ISO collaborates closely with the International ElectrotechnicalCommission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part3.Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.Publication as an International Standard requires approval by at least 75% of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this International Standard may be the subject ofpatent rights. ISO shall not be held responsible for identifying any or all such patent rights.International Standard ISO2230 was prepared by Technical Committee ISO/TC45, Rubber and rubber products,Subcommittee SC4, Products (other than hoses).This second edition cancels and replaces the first edition (ISO2230:1973), which has been technically revised.Annex
...

INTERNATIONAL ISO
STANDARD 2230
Second edition
2002-04-15
Rubber products — Guidelines for storage
Produits à base d'élastomères — Lignes directrices pour le stockage

Reference number
ISO 2230:2002(E)
©
ISO 2002

---------------------- Page: 1 ----------------------
ISO 2230:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
©
ii ISO 2002 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 2230:2002(E)
Contents Page
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification of rubber types according to their relative susceptibility to deterioration . 2
5 Packaging . 4
6 Storage . 5
7 Inspection, testing and recording of data during storage . 7
Annex
A Recommendations for inspection and testing of specific products . 10
Bibliography. 11
©
ISO 2002 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 2230:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 2230 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products,
Subcommittee SC 4, Products (other than hoses).
This second edition cancels and replaces the first edition (ISO 2230:1973), which has been technically revised.
Annex A of this International Standard is for information only.
©
iv ISO 2002 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 2230:2002(E)
Introduction
Man
...