ISO/IEC 23007-3:2011/Amd 1:2015
(Amendment)Information technology — Rich media user interfaces — Part 3: Conformance and reference software — Amendment 1: Conformance and reference software for widget extension and AUI
Information technology — Rich media user interfaces — Part 3: Conformance and reference software — Amendment 1: Conformance and reference software for widget extension and AUI
Technologies·de·l'information·—·Interfaces·d'utilisateur·au·support·riche — Partie 3: Conformité et logiciel de référence — Amendement 1: Conformité et logiciel de référence pour l'extension widget et l'AUI
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 23007-3
First edition
2011-07-15
AMENDMENT 1
2015-05-01
Information technology — Rich media
user interfaces —
Part 3:
Conformance and reference software
AMENDMENT 1: Conformance and
reference software for widget extension
and AUI
Technologies·de·l’information· —
·Interfaces·d’utilisateur·au·support·riche —
Partie 3: Conformité et logiciel de référence
AMENDEMENT 1: Conformité et logiciel de référence pour l’extension
widget et l’AUI
Reference number
ISO/IEC 23007-3:2011/Amd.1:2015(E)
©
ISO/IEC 2015
---------------------- Page: 1 ----------------------
ISO/IEC 23007-3:2011/Amd.1:2015(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2015 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 23007-3:2011/Amd.1:2015(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
Details of any patent rights identified during the development of the document will be in the Introduction
and/or on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT), see the following URL: Foreword — Supplementary information.
The committee responsible for this document is ISO/IEC JTC 1, Information technology, SC 29, Coding of
audio, picture, multimedia and hypermedia information.
© ISO/IEC 2015 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC 23007-3:2011/Amd.1:2015(E)
Information technology — Rich media user interfaces —
Part 3:
Conformance and reference software
AMENDMENT 1: Conformance and reference software for
widget extension and AUI
Replace Clause 1 with the following:
1 Scope
This part of ISO/IEC 23007 specifies how to test whether data and decoders meet requirements specified
by ISO/IEC 23007. In this part of ISO/IEC 23007, widget generators are not addressed specifically. A
generator may be said to be an ISO/IEC 23007 generator if it generates widgets compliant with the
syntactic and semantic requirements specified in ISO/IEC 23007-1.
Procedures are described for testing conformance of widgets and widget managers to the requirements
defined in ISO/IEC 23007-1 and conformance of xml instances to the requirements defined in
ISO/IEC 23007-2.
In Clause 2, add the following:
ISO/IEC 23007-2, Information technology — Rich media user interfaces — Part 2: Advanced user
interaction interface
Move content of Clause 5 Conformance of Widget Managers to 5.1 Non normative behaviour.
Add 5.2:
5.2 Normative behaviour
Conformant widget managers implement a service of type “urn:mpeg:mpeg-u:standard-
service:widget-manager”. Conformance testing of this feature does not require additional test
sequences: any test sequence from clause 6 below can be used.
The testing procedure of the “startWidget” message is:
— launch a widget manager A on a device connected to the network;
— launch a widget manager B on the same device or another device connected to the network;
— start any widget in widget manager A;
— in the widget manager A user interface, trigger sending of the startWidget message: this step may
be decomposed into a choice of which widget to send, a choice of which visible widget managers to
send the widget to, where at least widget manager B should be present; there should be a way to
choose widget manager B and a final validation.
Upon completion of the procedure, the transferred widg
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.