ISO 15270-5:2025

Plastics - Guidelines for the recovery and recycling of plastics waste - Part 5: Organic/biological recycling

This document establishes the terms, definitions, methodologies and calculations that are necessary for the recovery and recycling of waste from plastic products and materials labelled as industrially compostable through organic recycling. It identifies the different types of organic recycling technologies used in the recovery and subsequent recycling of industrially compostable plastics waste arising from pre-consumer and post-consumer sources. It also establishes the requirements and calculations to be considered in evaluating organic recycling inputs and outputs and determining output classifications for the recycling operation and the downstream integration points. This document also outlines general quality requirements to be applied in all steps of the recovery process, and provides general recommendations for inclusion in material standards, test standards and product specifications. The process stages, requirements, recommendations and terminology presented in this document are intended to be of general applicability. This document does not establish test methods and criteria for the definition of the organic recyclability (e.g. compostability) of plastic materials and products. This document refers to plastic waste deriving from products that have been classified as suitable for recovery through organic recycling by the relevant reference standards (e.g. ISO 17088, ISO 18606), and therefore labelled as industrially compostable. These products are generally called “industrially compostable” (e.g. compostable bag, compostable tableware) meaning “suitable for organic recycling”, independently of the treatment technology used for recycling (whether it is composting, or a combination of anaerobic digestion and composting, or only anaerobic digestion). This document does not address home composting because this gardening practice cannot be classified as recycling.

Plastiques — Lignes directrices pour la valorisation et le recyclage des déchets plastiques — Partie 5: Recyclage organique/biologique

L'ISO 15270:2008 fournit des lignes directrices pour le développement de normes et de spécifications couvrant la valorisation des déchets plastiques, y compris le recyclage. Elle établit les différentes options pour la valorisation des déchets plastiques provenant de sources pré-consommation et post-consommation. Elle établit également les exigences en matière de qualité, qu'il convient de considérer dans toutes les étapes du processus de valorisation, et fournit des recommandations générales à inclure dans les normes de matières, les normes d'essai et les spécifications de produit. Par conséquent, les étapes du processus, les exigences, les recommandations et la terminologie présentées dans l'ISO 15270:2008 sont destinées à une application générale.

General Information

• Status: Published
• Publication Date: 05-Nov-2025
• ICS: 13.030.50 - Recycling
• ICS: 83.080.01 - Plastics in general
• Technical Committee: ISO/TC 61/SC 14 - Environmental aspects
• Drafting Committee: ISO/TC 61/SC 14 - Environmental aspects
• Current Stage: 6060 - International Standard published
• Start Date: 06-Nov-2025
• Due Date: 12-Jul-2026
• Completion Date: 06-Nov-2025

Relations

• Revises: ISO 15270:2008 - Plastics - Guidelines for the recovery and recycling of plastics waste
• Effective Date: 06-Jun-2022

Overview

ISO 15270-5:2025 - Plastics: Guidelines for the recovery and recycling of plastics waste - Part 5: Organic/biological recycling provides a structured framework for recovering and recycling industrially compostable plastics through organic recycling routes (e.g., industrial composting and anaerobic digestion). The standard defines terms, describes waste flows and treatment stages, and sets out the methodologies and calculations needed to evaluate inputs, outputs and recycling rates for compostable plastic waste collected from pre‑ and post‑consumer sources. It explicitly excludes home composting and does not itself define test methods for compostability.

Key Topics and Requirements

• Terms and definitions: Harmonised vocabulary for plastic waste, compost, industrial composting, compostable plastic waste and related concepts (references ISO 472).
• Waste flows and separate collection: Guidance on collection systems for bio‑waste and quality criteria needed for organic recycling feedstocks.
• Treatment technologies: Identification of organic recycling technologies (industrial composting, anaerobic digestion, and combinations) and their role in recovery pathways.
• Inputs, outputs and classifications: Methodologies and calculations to quantify organic recycling inputs/outputs, determine recyclate (e.g., compost or digestate) quality and classify outputs for downstream use.
• Quality requirements: General quality controls and recommendations to be applied across recovery stages to minimise contamination and ensure beneficial use of outputs.
• Guidance for standards and specifications: Recommendations for inclusion in material, test and product standards to support consistent implementation.
• Scope limitations: Does not establish compostability test criteria (see ISO 17088, ISO 18606); excludes home composting as a recycling pathway.

Applications and Users

ISO 15270-5:2025 is designed for practical use by:

• Waste management operators and composting facility managers wanting to integrate compostable plastics into bio‑waste streams.
• Packaging and product designers specifying end‑of‑life routes and product labelling for compostable plastics.
• Environmental and regulatory authorities setting policy or calculating organic recycling rates.
• Certification bodies, standard writers and testing organisations aligning product specifications with organic recycling best practice.
• Environmental consultants assessing the impacts of biodegradable plastic use and collection schemes.

Practical uses include designing separate collection systems, assessing contaminant impacts on compost/digestate quality, calculating recycling rates for industrially compostable packaging, and defining acceptance criteria for compost outputs.

Related Standards

• ISO 17088 - Specifications for compostable plastics
• ISO 18606 - Packaging and the environment - Organic recycling
• ISO 472 - Plastics - Vocabulary

Keywords: ISO 15270-5:2025, compostable plastics, organic recycling, industrial composting, anaerobic digestion, recycling rate, bio‑waste management, compost quality.

Standards Content (Sample)

International
Standard
ISO 15270-5
First edition
Plastics — Guidelines for the recovery
2025-11
and recycling of plastics waste —
Part 5:
Organic/biological recycling
Plastiques — Lignes directrices pour la valorisation et le
recyclage des déchets plastiques —
Partie 5: Recyclage organique/biologique
Reference number
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Waste flows . 3
5 Separate collection of post-consumer waste . 4
5.1 Separate collection systems .4
5.2 Quality for organic recycling .4
6 Waste treatment plants undertaking organic/biological recycling. 5
7 Nature and quality of output (recyclate) . 8
8 How to determine the recycling rate of compostable plastics . 8
Annex A (informative) Composition analysis of bio-waste and discards .10
Bibliography .13

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 14, Environmental
aspects.
This first edition of ISO 15270-5, together with ISO 15270-1, ISO 15270-2, ISO 15270-3 and ISO 15270-4,
cancels and replaces ISO 15270:2008, which has been technically revised.
The main changes are as follows:
— ISO 15270 has been turned into a series of five parts, where ISO 15270-1 is the succession of the essential
part of the second edition (2008) and specific methods and technological description of recycling
methods are given as ISO 15270-2, ISO 15270-3, ISO 15270-4 and ISO 15270-5.
A list of all parts in the ISO 15270 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
Introduction
Kitchen waste, food scraps, lawn mowing and pruning branches are generally referred to as bio-waste,
since it is composed of biodegradable organic materials. Its intrinsic biodegradability makes it possible for
this waste to be recovered through biological processes, in which the breakdown and reorganization of the
waste into new substances takes place thanks to the action of microorganisms. In ecology, the term recycling
refers to the biogeochemical cycle, in particular to that of carbon. In the carbon cycle, organic compounds
formed from atmospheric CO through photosynthesis enter the food chain, are metabolised into different
compounds, transferred among different environmental compartments, and eventually oxidised back to
CO , closing the cycle.
The recycling of bio-waste takes place through processes that, regardless of size, lead to the production of
soil improvers under controlled conditions. These processes are aerobic composting or anaerobic digestion
preferably followed by aerobic composting of digestate.
NOTE The digestate is preferably aerobically composted after anaerobic digestion to maximise benefits to the
soil it is applied to afterwards and minimises some potential agro-environmental issues such as release of ammonia
and nitrates.
Currently, the predominant output of organic recycling is compost, a soil improver. The various components
of the organic waste are mixed in an appropriate way to favour a bio-reaction that transforms the initial
waste into a stable, odourless, and sanitized product i.e. compost, that is used in agriculture and horticulture.
However, in some countries the slurry-like digestate is applied to agricultural land before maturation. The
closure of the cycle (from bio-waste to soil improver back to the soil) is currently considered very important
to return the organic substances necessary to maintain fertility back to the soil.
If the waste treatment gives rise to a final output for which there is no advantageous use (for example because
the low quality makes it unsuitable for agriculture), then it cannot be defined as recycling. This concept is
taken up by some relevant legislations. For example, in Europe, a material produced by the treatment of bio-
waste whose quality is so low that it can only be used for backfilling operations cannot be considered the
[1]
result of recycling. The recycling of bio-waste is hindered by the presence of incompatible materials and
objects. Non-biodegradable objects (e.g. conventional plastics waste) represent a contamination for organic
recycling. Biodegradable plastics (e.g. that meet the criteria of ISO 17088), on the other hand, are potentially
suitable for organic recycling and can be used to make industrially compostable products and compostable
packaging made of compostable plastics. These products can be recovered together with the bio-waste
contributing to the formation of compost. Generally, the mixing between biodegradable plastic waste and
bio-waste is achieved, for example, when industrially compostable plastic waste is collected with bio-waste
(for example bags for separate collection of bio-waste, or tableware in collective catering) or tends to be
contaminated with bio-waste (some food packaging).
The term industrially compostable is widely used to indicate waste that has characteristics that make it
compatible with the separate collection and subsequent treatment of bio-waste. Therefore, in communication
with the consumers regarding the end of life of products, the term "industrially compostable" is not used
with a technical meaning, i.e. to refer to a specific waste treatment technology (i.e. aerobic treatment carried
out at high temperature) but as an indication on how to operate separate collection with it. In this document,
the term industrially compostable will be used in this spirit, i.e. as a synonym for "suitable to be collected
with bio-waste and recovered by means of organic recycling”.
Industrially compostable products and packaging made of compostable plastics (as defined in the relevant
standards, e.g. ISO 17088) contribute to the composting process and the production of compost similarly
to cellulose-based compounds, a main feedstock of composting. They are a source of carbon and energy.
Therefore, composting of biodegradable plastics is a form of recycling even if the result of this process is
very different from the original waste. The idea that recycling can give rise to products of a different nature
from that of the original waste is well established both at the standardization level (e.g. in the definition
of recycling from ISO 472) and at the legislative level. This concept is widely used in different legal and
[1]
national contexts. For example, the European Waste Framework Directive states that "recycling means
any recovery operation by which waste materials are reprocessed into products, materials or substances
whether for the original or other purposes. It includes the reprocessing of organic material but does not
include energy recovery and the reprocessing into materials that are to be used as fuels or for backfilling
operations". As another example, the legislation in force in the Russian Federation states that “waste

v
recycling from usage of goods means to use waste resulted from used goods or secondary raw materials,
[2]
processed from used goods, for manufacturing any products”.
Home composting is different from industrial composting. Home composting is a practice used by private
individuals to process at home garden and food waste generated at household level and produce compost
for personal gardening use. In spite of the common name, industrial and home composting are two very
different activities, the former being a controlled waste treatment process and the latter being a gardening
activity. Compost produced by a private individual is for his own use and not for provision to others, free of
charge or in return for payment. Thus, strictly speaking home composting cannot be classified as a recycling
activity for compostable plastic waste, as the concept of recycling implies the conservation of the economic
value still present in the waste and the production of materials/substances to be used in the economy either
for the original purpose or for other purposes. This is a concept that has been adopted in some relevant
[3]
legislation. For example, in the European Directive on Packaging and Packaging waste , it is stipulated
that only industrial composting processes that are realized under controlled conditions are relevant for
calculating organic recycling rates of compostable packaging waste, whereas home composting processes
are not taken into account.
Small-scale waste treatment systems can enable recycling if, regardless of size, they are based on controlled
processes that result in products (e.g. soil improvers).

vi
International Standard ISO 15270-5:2025(en)
Plastics — Guidelines for the recovery and recycling of
plastics waste —
Part 5:
Organic/biological recycling
1 Scope
This document establishes the terms, definitions, methodologies and calculations that are necessary for the
recovery and recycling of waste from plastic products and materials labelled as industrially compostable
through organic recycling. It identifies the different types of organic recycling technologies used in the
recovery and subsequent recycling of industrially compostable plastics waste arising from pre-consumer
and post-consumer sources. It also establishes the requirements and calculations to be considered in
evaluating organic recycling inputs and outputs and determining output classifications for the recycling
operation and the downstream integration points.
This document also outlines general quality requirements to be applied in all steps of the recovery process,
and provides general recommendations for inclusion in material standards, test standards and product
specifications. The process stages, requirements, recommendations and terminology presented in this
document are intended to be of general applicability.
This document does not establish test methods and criteria for the definition of the organic recyclability
(e.g. compostability) of plastic materials and products.
This document refers to plastic waste deriving from products that have been classified as suitable for
recovery through organic recycling by the relevant reference standards (e.g. ISO 17088, ISO 18606),
and therefore labelled as industrially compostable. These products are generally called “industrially
compostable” (e.g. compostable bag, compostable tableware) meaning “suitable for organic recycling”,
independently of the treatment technology used for recycling (whether it is composting, or a combination of
anaerobic digestion and composting, or only anaerobic digestion).
This document does not address home composting because this gardening practice cannot be classified as
recycling.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 472, Plastics — Vocabulary
ISO 17088, Plastics — Organic recycling — Specifications for compostable plastics
ISO 18606, Packaging and the environment — Organic recycling
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 472 and the following apply.

ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
plastic waste
discarded material which contains as an essential ingredient a high polymer
Note 1 to entry: Plastic waste can be recycled via mechanical recycling, chemical recycling and organic recycling and
for energy recovery.
[SOURCE: ISO 24161:2022, 3.1.2.28]
3.2
compostable plastic waste
any plastic material or plastic object which the holder discards, or intends to discard, or is required to
discard that can be recovered by organic recycling as shown by relevant international standards
Note 1 to entry: Compostable plastic waste can be generated from post-consumer or pre-consumer activities.
Note 2 to entry: ISO 17088 is an international standard specification with requirements for compostable plastics.
Note 3 to entry: "Compostable” is used as a synonym for "suitable to be recovered by means of organic recycling”.
Note 4 to entry: Compostable plastic materials and objects compliant with the relevant international standards are
labelled as compostable.
3.3
consumer
individual member of the general public purchasing or using goods, property or services for private purposes
[SOURCE: ISO 14025:2006, 3.16, modified — Reference has been deleted.]
3.4
compost
organic soil improver obtained by biodegradation of a mixture consisting of plant residues with other
organic material (e.g. bio-waste)
[SOURCE: ISO 17088:2021, 3.1, modified — “improver” instead of conditioner, "plant" instead of "vegetable",
added “(e.g. bio-waste)”, deleted “principally”, "occasionally", “and having a limited mineral content”]
3.5
composting
aerobic process designed to produce compost starting from biodegradable waste
Note 1 to entry: Composting is classified into industrial composting, home composting and worm composting.
[SOURCE: ISO 17088:2021, 3.3]
3.6
industrial composting
commercial composting
composting process performed under controlled conditions on industrial scale with the aim of producing
compost for the market
Note 1 to entry: In some regions industrial composting is referred to as professional composting.
[SOURCE: ISO 17088:2021, 3.13]

3.7
home composting
composting process performed by a private individual with the aim of producing compost for at home use
[SOURCE: ISO 17088:2021, 3.15, modified — “at home” instead of “his own”]
3.8
organic recycling
biological recycling
aerobic (composting) or anaerobic (digestion) treatment of compostable plastics waste together with bio-
waste under controlled conditions to produce stabilized organic soil improver
Note 1 to entry: The term includes industrial processes based on living microorganisms capable of converting bio-
waste into valuable products.
3.9
anaerobic digestion
process of controlled decomposition of biodegradable materials under managed conditions where free
oxygen is absent, at temperatures suitable for naturally occurring mesophilic or thermophilic anaerobic and
facultative anaerobic bacteria species, that convert the inputs to a methane rich biogas and digestate
Note 1 to entry: In a second phase, the digestate is typically stabilized by means of a composting (aerobic) process.
Note 2 to entry: In some countries, not stabilized digestate is directly applied to agricultural land.
[SOURCE: ISO 18606:2013, 3.10, modified — added Note 2 to entry; added “anaerobic”]
3.10
organic recyclability
biological recyclability
potential of a material to be recovered by organic recycling
Note 1 to entry: The term compostability is generally used as a synonym.
3.11
bio-waste
biodegradable garden and park waste, food and kitchen waste from households, offices, restaurants,
wholesale, canteens, caterers and retail premises and comparable waste from food processing plants
3.12
discards
items that are removed from the main stream of organic/biological recycling because they are not considered
to be directly compatible with the process and may contaminate the final product
Note 1 to entry: Discards are generally created by screening.
3.13
screening
any operations aimed at removing non-composted or non-compostable materials
Note 1 to entry: It is carried out using different types of equipment, such as drum or vibrating screens, squeezing
machineries, air classifiers and other devices.
4 Waste flows
Plastic waste originated from objects and materials suitable for organic/biological recycling (generally
defined and labelled as compostable as per specific standards) can originate at different levels in the supply
chain that includes production, marketing and use.
The criterion that helps to classify waste is based on whether the materials or products have been put in
use and placed on the market or not. If they have been placed on the market, the waste generated is post-
consumer. Otherwise, the waste generated is pre-consumer (also referred to as post-industrial). The term

“placed on the market” also includes returns and off class items. Waste produced at manufacturing level
(pre-consumer/post-industrial) is a processing residue, which cannot be reworked either in the original
process or in another process whether it is located in the original plant or in other plants. They are, for
example, scraps, non-standard defective products which are considered unworkable, and which are
therefore expelled from the manufacturing cycle as waste. As long as the original compostability conditions
are still present, these materials can be recovered by organic/biological recycling.
Waste generated at the consumer level (post-consumer waste) consists of products (including packaging)
discarded after being placed on the market. The waste composed of compostable products including those
made of compostable plastic is collected through separate collection with bio-waste and sent for organic
recycling. The waste produced by the consumer who takes food away from restaurants for outdoor
consumption (e.g. single-use coffee cups) is under the responsibility of the consumer and therefore is post-
consumer as well.
For items labelled as compostable and sorted by the consumers at home, there is one main waste flow
option, namely that of separate collection with bio-waste. Of course, this option is only possible if a bio-
waste collection and recycling system is implemented. Likewise, the pre-consumer biodegradable waste
labelled as compostable is meant to be recovered by organic recycling. However, in this case other forms of
recycling are feasible (e.g. chemical, mechanical recycling) on the basis of opportunity assessments and local
legislations. The choice of the industrial/commercial organization responsible for the waste depends on the
quality of the waste (i.e. if it is mixed with bio-waste or not), on the availability of the collection systems and
recycling plants in the waste production area (i.e. on logistical reasons), on economic assessments (i.e. the
cost imposed by the different recycling systems.).
5 Separate collection of post-consumer waste
5.1 Separate collection systems
The post-consumer compostable plastics waste is collected in the separate collection circuits of bio-
waste. It is known that the separation at the source of bio-waste allows a fundamental improvement of
the environmental quality (e.g. due to the lower contamination with non-compostable plastics) and of the
agronomic value of the final compost. Establishing a single model of separate collection is not possible as
operational and social variables can vary greatly across territories. Any model adopted must be designed
to a
...