ISO/IEC 14543-3-4:2007

Information technology — Home electronic system (HES) architecture — Part 3-4: System management — Management procedures for network based control of HES Class 1

Home electronic system (HES) standards describe the architecture of home control systems including communication and interoperability aspects. This International Standard specifies the general principles for network device management.

Technologies de l'information — Architecture des systèmes électroniques domotiques (HES) — Partie 3-4: Titre manque

General Information

• Status: Published
• Publication Date: 06-Feb-2007
• ICS: 35.200 - Interface and interconnection equipment
• ICS: 35.240.67 - IT applications in building and construction industry
• ICS: 35.240.99 - IT applications in other fields
• Technical Committee: ISO/IEC JTC 1/SC 25 - Interconnection of information technology equipment
• Drafting Committee: ISO/IEC JTC 1/SC 25 - Interconnection of information technology equipment
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 06-Sep-2017

Standards Content (Sample)

INTERNATIONAL ISO/IEC

STANDARD 14543-3-4


First edition
2007-01

Information technology –
Home electronic system (HES) architecture –
Part 3-4:
System management –
Management procedures for network
based control of HES Class 1

Reference number
ISO/IEC 14543-3-4:2007(E)

---------------------- Page: 1 ----------------------
INTERNATIONAL ISO/IEC


STANDARD 14543-3-4


First edition
2007-01



Information technology –
Home electronic system (HES) architecture –
Part 3-4:
System management –
Management procedures for network
based control of HES Class 1
Copyright  2007 ISO/IEC, Geneva   All rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
N

For price, see current catalogue

---------------------- Page: 2 ----------------------
– 2 – 14543-3-4 © ISO/IEC:2007(E)
CONTENTS

FOREWORD.7
INTRODUCTION.9
1 Scope.10
2 Normative references.10
3 Terms, definitions and abbreviations .11
3.1 Terms and definitions .11
3.2 Abbreviations.13
4 Conformance.13
5 Network management procedures.13
5.1 General .13
5.2 NM_IndividualAddress_Read .14
5.2.1 Description .14
5.2.2 Management service used .14
5.2.3 Sequence .14
5.2.4 Exception handling.14
5.3 NM_IndividualAddress_Write .14
5.3.1 Description .14
5.3.2 Management services used.15
5.3.3 Sequence .15
5.3.4 Exception handling.16
5.4 NM_SerialNumberDefaultIA_Scan.16
5.4.1 Description .16
5.4.2 Management service used .16
5.4.3 Sequence .17
5.4.4 Exception handling.17
5.5 NM_IndividualAddress_SerialNumber_Read .17
5.5.1 Description .17
5.5.2 Management service used .17
5.5.3 Sequence .17
5.5.4 Exception handling.18
5.6 NM_IndividualAddress_SerialNumber_Write .18
5.6.1 Description .18
5.6.2 Management services used.18
5.6.3 Sequence .18
5.6.4 Exception handling.18
5.7 NM_DomainAddress_Read .19
5.7.1 Description .19
5.7.2 Management service used .19
5.7.3 Sequence .19
5.7.4 Exception handling.19
5.8 NM_DomainAddress_Write.19
5.8.1 Description .19
5.8.2 Management services used.20
5.8.3 Sequence .20

---------------------- Page: 3 ----------------------
14543-3-4 © ISO/IEC:2007(E) – 3 –
5.8.4 Exception handling.21
5.9 NM_DomainAddress_Scan .21
5.9.1 Description .21
5.9.2 Management service used .21
5.9.3 Sequence .22
5.9.4 Exception handling.22
5.10 NM_Router_Scan .22
5.10.1 Description .22
5.10.2 Management service used .22
5.10.3 Sequence .23
5.11 NM_SubnetworkDevices_Scan .23
5.11.1 Description .23
5.11.2 Management service used .23
5.11.3 Sequence .23
5.12 NM_SubnetworkAddress_Read.24
5.12.1 Description .24
5.12.2 Management service used .24
5.12.3 Sequence .24
5.12.4 Exception handling.24
5.13 NM_IndividualAddress_Reset .24
5.13.1 Description .24
5.13.2 Management services used.24
5.13.3 Sequence .25
5.14 NM_IndividualAddress_Scan.25
5.14.1 Description .25
5.14.2 Management services used.25
5.14.3 Sequence .26
5.14.4 Possible reactions.26
5.15 NM_IndividualAddress_Check.26
5.15.1 Description .26
5.15.2 Management services used.26
5.15.3 Sequence .27
5.16 NM_IndividualAddress_Check_LocalSubnetwork.27
5.16.1 Description .27
5.16.2 Management service used .27
5.16.3 Sequence .28
5.17 NM_GroupAddress_Check.28
5.17.1 Description .28
5.17.2 Management service used .28
5.17.3 Sequence .28
5.17.4 Exception handling.29
5.18 NM_FunctionalBlock_Scan .29
5.18.1 Description .29
5.18.2 Management service used .29
5.18.3 Sequence .29
5.18.4 Exception handling.29
6 Device management procedures .30
6.1 General .30
6.2 General exception handling.30

---------------------- Page: 4 ----------------------
– 4 – 14543-3-4 © ISO/IEC:2007(E)
6.3 DM_Connect.30
6.3.1 General Description .30
6.3.2 Procedure: DMP_Connect_RCo .30
6.3.3 Procedure: DMP_Connect_RCl .31
6.4 DM_Disconnect .32
6.4.1 General description.32
6.4.2 Procedure: DMP_Disconnect_RCo.32
6.4.3 Procedure: DMP_Disconnect_RCl .32
6.5 DM_Authorize.33
6.5.1 General description.33
6.5.2 Procedure: DMP_Authorize_RCo .33
6.6 DM_SetKey .33
6.6.1 General description.33
6.6.2 Procedure: DM_SetKey_RCo .34
6.7 DM_Restart .34
6.7.1 General description.34
6.7.2 Procedure: DM_Restart_RCo .34
6.8 DM_Delay.35
6.8.1 Description .35
6.8.2 Procedure: DMP_Delay.35
6.9 DM_IndividualAddressRead .35
6.10 DM_IndividualAddressWrite .35
6.11 DM_DomainAddressRead.36
6.12 DM_DomainAddressWrite.36
6.13 DM_ProgMode_Switch.36
6.13.1 Description .36
6.13.2 Procedure: DMP_ProgModeSwitch_RCo .36
6.14 DM_GroupObject_Link_Read.37
6.14.1 Description .37
6.14.2 Management service used .37
6.14.3 Sequence .37
6.14.4 Exception handling.37
6.15 DM_GroupObject_Link_Write.37
6.15.1 Description .37
6.15.2 Management services used.38
6.15.3 Sequence .38
6.15.4 Exception handling.38
6.16 DM_MemWrite.38
6.16.1 General description.38
6.16.2 Procedure: DMP_MemWrite_RCo .39
6.16.3 Procedure: DMP_MemWrite_RCoV.40
6.17 DM_MemVerify.41
6.17.1 General description.41
6.17.2 Procedure: DMP_MemVerify_RCo.42
6.18 DM_MemRead.42
6.18.1 General description.42
6.18.2 Procedure: DMP_MemRead_RCo .43
6.19 DM_UserMemWrite .43
6.19.1 General description.43

---------------------- Page: 5 ----------------------
14543-3-4 © ISO/IEC:2007(E) – 5 –
6.19.2 Procedure: DMP_UserMemWrite_RCo.44
6.19.3 Procedure: DMP_UserMemWrite_RCoV.45
6.20 DM_UserMemVerify.46
6.20.1 General description.46
6.20.2 Procedure: DMP_UserMemVerify_RCo .46
6.21 DM_UserMemRead .47
6.21.1 General description.47
6.21.2 Procedure: DMP_UserMemRead_RCo .47
6.22 DM_InterfaceObjectWrite.48
6.22.1 General description.48
6.22.2 Procedure: DMP_InterfaceObjectWrite_R .48
6.23 DM_InterfaceObjectVerify .49
6.23.1 General description.49
6.23.2 Procedure: DMP_InterfaceObjectVerify_R .50
6.24 DM_InterfaceObjectRead.51
6.24.1 General description.51
6.24.2 Procedure: DMP_InterfaceObjectRead_R.51
6.25 DM_InterfaceObjectScan .52
6.25.1 General description.52
6.25.2 Procedure: DMP_InterfaceObjectScan_R .53
6.26 DM_LoadStateMachineWrite.54
6.26.1 General description.54
6.26.2 Procedure: DMP_LoadStateMachineWrite_RCo_Mem .56
6.26.3 Procedure: DMP_LoadStateMachineWrite_RCo_IO.59
6.27 DM_LoadStateMachineVerify .62
6.27.1 General description.62
6.27.2 Procedure: DM_LoadStateMachineVerify_RCo_Mem.63
6.27.3 Procedure: DMP_LoadStateMachineVerify_R_IO .64
6.28 DM_LoadStateMachineRead.64
6.28.1 General description.64
6.28.2 Procedure: DMP_LoadStateMachineRead_RCo_Mem .65
6.28.3 Procedure: DMP_LoadStateMachineRead_R_IO .66
6.29 DM_RunStateMachineWrite .67
6.29.1 General description.67
6.29.2 Procedure: DMP_RunStateMachineWrite_RCo_Mem .67
6.29.3 Procedure: DMP_RunStateMachineWrite_R_IO .68
6.30 DM_RunStateMachineVerify .69
6.30.1 General description.69
6.30.2 Procedure: DMP_RunStateMachineVerify_RCo_Mem.70
6.30.3 Procedure: DMP_RunStateMachineVerify_R_IO.70
6.31 DM_RunStateMachineRead .71
6.31.1 General description.71
6.31.2 Procedure: DMP_RunStateMachineRead_RCo_Mem .72
6.31.3 Procedure: DMP_RunStateMachineRead_R_IO.72
6.32 DM_LCSlaveMemWrite.73
6.32.1 General description.73
6.32.2 Procedure: DMP_LCSlaveMemWrite_RCo .74
6.33 DM_LCSlaveMemVerify .75
6.33.1 General description.75

---------------------- Page: 6 ----------------------
– 6 – 14543-3-4 © ISO/IEC:2007(E)
6.33.2 Procedure: DMP_LCSlaveMemVerify_RCo.75
6.34 DM_LCSlaveMemRead.76
6.34.1 General description.76
6.34.2 Procedure: DMP_LCSlaveMemRead_RCo .76
6.35 DM_LCExtMemWrite .77
6.35.1 General description.77
6.35.2 Procedure: DMP_LCExtMemWrite_RCo.78
6.36 DM_LCExtMemVerify.79
6.36.1 General description.79
6.36.2 Procedure: DMP_LCExtMemVerify_RCo .80
6.37 DM_LCExtMemRead .80
6.37.1 General description.80
6.37.2 Procedure: DMP_LCExtMemRead_RCo .81
6.38 DM_LCExtMemOpen .81
6.38.1 General description.81
6.38.2 Procedure: DMP_LCExtMemOpen_RCo.82
6.39 DM_LCRouteTableStateWrite .82
6.39.1 General description.82
6.39.2 Procedure: DMP_LCRouteTableStateWrite_RCo.82
6.40 DM_LCRouteTableStateVerify.83
6.40.1 General description.83
6.40.2 Procedure: DMP_LCRouteTableStateVerify_RCo .83
6.41 DM_LCRouteTableStateRead .84
6.41.1 General description.84
6.41.2 Procedure: DMP_LCRouteTableStateRead_RCo.84
Bibliography .86


Table 1 – Resulting states after each event .55
Table 2 – Overview state machine types and tables .55
Table 3 – Overview addresses for the load management controls .56
Table 4 – Addresses of the load state controls.63
Table 5 – Addresses of the load state controls.65
Table 6 – Run state events and resulting run states.67
Table 7 – Addresses of the run state controls .68

---------------------- Page: 7 ----------------------
14543-3-4 © ISO/IEC:2007(E) – 7 –

INFORMATION TECHNOLOGY –
HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE –

Part 3-4: System management – Management procedures for network
based control of HES Class 1

FOREWORD
1) ISO (International Organization for Standardization) and IEC (International Electrotechnical Commission) form
the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards. Their preparation is entrusted to technical
committees; any ISO and IEC member body interested in the subject dealt with may participate in this
preparatory work. International governmental and non-governmental organizations liaising with ISO and IEC
also participate in this preparation.
2) In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to
national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the
national bodies casting a vote.
3) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC and ISO member bodies.
4) IEC, ISO and ISO/IEC Publications have the form of recommendations for international use and are accepted
by IEC and ISO member bodies in that sense. While all reasonable efforts are made to ensure that the
technical content of IEC, ISO and ISO/IEC Publications is accurate, IEC or ISO cannot be held responsible for
the way in which they are used or for any misinterpretation by any end user.
5) In order to promote international uniformity, IEC and ISO member bodies undertake to apply IEC, ISO and
ISO/IEC Publications transparently to the maximum extent possible in their national and regional publications.
Any divergence between any ISO/IEC Publication and the corresponding national or regional publication should
be clearly indicated in the latter.
6) ISO and IEC provide no marking procedure to indicate their approval and cannot be rendered responsible for
any equipment declared to be in conformity with an ISO/IEC Publication.
7) All users should ensure that they have the latest edition of this publication.
8) No liability shall attach to IEC or ISO or its directors, employees, servants or agents including individual
experts and members of their technical committees and IEC or ISO member bodies for any personal injury,
property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including
legal fees) and expenses arising out of the publication of, use of, or reliance upon, this ISO/IEC publication or
any other IEC, ISO or ISO/IEC publications.
9) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
IEC and ISO draw attention to the fact that it is claimed that compliance
...