ISO 3482:2022
(Main)Ships and marine technology — Technical guidelines for active source exploration with ocean bottom seismometers (OBS)
Ships and marine technology — Technical guidelines for active source exploration with ocean bottom seismometers (OBS)
This document specifies the technical requirements for system makeup, ocean bottom seismometer (OBS) instruments, active sources, field design, exploration operation, data processing for active source exploration with OBS, and their relative terms. This document is applicable to active source exploration with OBS, but also a useful reference to the passive source exploration with OBS. It can be used in seabed resource exploration, geological disaster surveillance and submarine geoscience research.
Navires et technologie maritime — Lignes directrices techniques relatives à l'exploration des sources actives avec des sismomètres de fond de mer (OBS)
General Information
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 3482
First edition
2022-05
Ships and marine technology —
Technical guidelines for active source
exploration with ocean bottom
seismometers (OBS)
Navires et technologie maritime — Lignes directrices techniques
relatives à l'exploration des sources actives avec des sismomètres de
fond de mer (OBS)
Reference number
ISO 3482:2022(E)
© ISO 2022
---------------------- Page: 1 ----------------------
ISO 3482:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 3482:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 S c op e . 1
2 Nor m at i ve r ef er enc e s . 1
3 Terms and definitions . 1
4 R e qu i r ement s . 3
4.1 General . 3
4.2 S tandard of time and space . 3
4.2.1 S tandard of time . 3
4.2.2 C oordinate system . 3
4.2.3 Vertical reference . 3
4.2.4 P ositioning system . 3
4.3 O BS technical indicators . 3
4.3.1 OBS acquisition system . 3
4.3.2 O BS deployment/recovery system . 3
4.3.3 Power supply system . 4
4 .4 S ei s m ic s ou r c e s . 4
4 . 5 F ield de s i g n . 4
4.6 Marine exploration process . 5
4.6.1 OBS preparation . 5
4.6.2 R elevant software, media and files . 5
4.6.3 OBS parameter setting . 5
4.6.4 G lass ball sealing . 6
4.6.5 P ressure tubes . . 6
4.6.6 O BS deployment and recovery . 6
4.6.7 Voyage requirements. 7
4.6.8 T iming and positioning . 7
4.6.9 O peration log . 7
4.7 F ield data . 8
4.7.1 R aw data . 8
4.7.2 R elevant data . 8
4.8 D ata processing and archiving . 8
4.8.1 Data processing . 8
4.8.2 D ata archiving and reports . 9
Bibliography .10
iii
© ISO 2022 – All rights reserved
---------------------- Page: 3 ----------------------
ISO 3482:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 8, Ships and marine technology,
Subcommittee SC 13, Marine technology.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 3482:2022(E)
Introduction
Exploration for the structures and movement of deep earth on the seafloor is one of the important
approaches for human beings to recognize earth system evolution, predict seabed resources formation,
and understand natural disaster mechanisms. Unlike the multi-channel seismic method which only
obtains primary waves by hydrophone streamers on the ocean surface, the ocean bottom seismometer
(OBS) is directly placed on the seabed and can receive both primary and shear waves, even Rayleigh
and Love waves from earth interior. Such a new seismic method gives an opportunity to better image
the structures, movement and rheology for the deep targets in solid earth beneath ocean which cover
up to ≈71 % of the earth’s surface. This method has been widely used in research on not only global
continental margins, subduction zones, mid-ocean ridges, but also regional oil and gas fields, marine
engineering constructions.
The signals received in OBS exploration can be either natural earthquakes or artificial excited seismic
sources. Accordingly, OBS exploration is divided into passive and active source methods. Passive source
exploration with OBS is a method by which OBSs just receive global natural earthquakes and obtain
deeper and wider information from the earth interior. Active source exploration with OBS is usually
used in a target region to reveal the structures, tectonics and composition of underground geological
bodies or crust and upper mantle by a special designed array of OBSs and sources. Because of its
strong pertinence, this active source method gradually becomes the main tool for regional deep earth
exploration, and is widely used by industry and academia.
OBS is a mature technical product and widely used in various deep earth imaging. However, there is a
lack of such a standard about active source exploration with OBS, which will seriously affect the testing,
identifying, evaluating of the performance requirements and data quality of such products. It should
therefore be necessary to standardize its technical requirements and basic procedures to promote
healthy development of this industry of seabed OBS exploration. In view of the above, this document
establishes the technical guidelines covering the main content of active source exploration with OBS
from OBS instruments, seismic sources and fieldwork processes, to data services.
v
© ISO 2022 – All rights reserved
---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 3482:2022(E)
Ships and marine technology — Technical guidelines for
active source exploration with ocean bottom seismometers
(OBS)
1 S cope
This document specifies the technical requirements for system makeup, ocean bottom seismometer
(OBS) instruments, active sources, field design, exploration operation, data processing for active source
exploration with OBS, and their relative terms.
This document is applicable to active source exploration with OBS, but also a useful reference to the
passive source exploration with OBS. It can be used in seabed resource exploration, geological disaster
surveillance and submarine geoscience research.
2 Normat ive references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
ocean bottom seismometer
OBS
seismic observation system with a seismic sensor placed on the seabed to record ground motions and
an acoustic sensor to record signals in the water column
Note 1 to entry: The main components include seismic sensing system (3.3) and acoustic sensing system (3.4),
recording and storage unit (3.5), release unit (3.8), acoustic communication unit (3.7), compass, internal clock,
power supply, lighting system, cargo compartment and protective cover etc.
Note 2 to entry: There are mainly two types of OBS, broadband and short period. The short period OBS, with the
lower corner of its frequency band not less than 2 Hz, usually used for active seismic source exploration.
3.2
active source exploration
exploration method in which sound wave signals are emitted in the water by ship-borne seismic sources
such as air gun, propagated downward through the crust and upper mantle, finally return to the seabed
and recorded by ocean bottom seismometers (3.1)
Note 1 to entry: The crust and upper mantle information carried by ocean bottom seismometers is in the form of
elastic wave.
Note 2 to entry: Active source is artificially excited at sea by physical or/and chemical means. Air gun sources are
used in arrays.
Note 3 to entry: Multiple sources of same or different volume are towed at designed offsets and field at defined
time delay to shape the resulting pressure wave used as seismic source.
1
© ISO 2022 – All rights reserved
---------------------- Page: 6 ----------------------
ISO 3482:2022(E)
3.3
seismic sensing system
system of earthquake sensing by ocean bottom seismometer (3.1) composed mostly of a low gain
geophone or a high gain seismometer, mostly with three components, one vertical and two perpendicular
horizontal components (XYZ) or, as an alternative, three identical sensors in three directions (UVW)
3.4
acoustic sensing system
system of sound sensing by ocean bottom seismometer (3.1) composed of a pressure sensor, mostly a
high impedance hydrophone
3.5
recording and storage unit
ocean bottom seismometer (3.1) recording unit which is used to control data acquisition, signal filtering,
signal amplification, analogue-to-digital conversion and storage
Note 1 to entry: The recording unit is composed of microprocessor and circuit components, the storage unit is
composed of a buffer and one or more internal or external memory devices.
3.6
breakout box
device for ocean bottom seismometer (3.1) to set up a cabled or wireless communication for status
checking or parameter setting
3.7
acoustic communication unit
acoustic wave sensing device which communicates with the deck control unit (3.9) through the acoustic
wave, starts the release decoupling program, and sends the position or distance to the deck control unit
(3.9) through the acoustic wave
3.8
release unit
device for driving the ocean bottom seismometer (3.1) placed on the seabed to separate from the anchor
which is mainly composed of a physical fixing device, a power supply and a circuit, and is matched with
an acoustic wave sensing device
Note 1 to entry: There are usually two release modes, one is that the deck unit drives the acoustic wave sensing
device to start the release procedure, the other is to set the release start-up time in advance, and the built-in
circuit and power supply realize the timing release.
Note 2 to entry: Release is usually accomplished by mechanical or electrochemical means.
3.9
deck control unit
acoustic communication device composed of a controller, a special cable and an acoustic transducer
which is used to di
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.