ISO 10303-240:2005

Industrial automation systems and integration — Product data representation and exchange — Part 240: Application protocol: Process plans for machined products

ISO 10303-240:2005 specifies the use of the integrated resources necessary for the scope and information requirements for the exchange, sharing and long term data retention of computer-interpretable process plan information for both numerical control (NC) and manually operated applications and associated product definition data. The following are within the scope of ISO 10303-240:2005: information out of the planning activity that is contained in the process plans for machined parts which includes: numerical controlled machines; manual operations. the manufacture of a single piece mechanical part, and assemblies of single piece parts for manufacturing purpose which includes: process data for part routing which includes manufacturing process and setup sequencing; process data for operation. interface for capturing technical data out of the upstream application protocols which includes: product definition data, including tracking a design exception notice of a part; initial material definition data. technical data for and/or out of the process planning for machined pats which includes: machining features for defining shapes necessary for manufacturing; machining feature classification structure; geometric and dimensional tolerances of the parts being manufactured; materials, and properties of the parts being manufactured. references to standards and specifications declared in the process plan; work instructions for the tasks required to manufacture a part, using which include: references to the resources required to perform the work; the sequences of the work instructions; relationships of the work to the part geometry. information required to support NC programming of processes specified in the process plan; shop floor information specified in the process plan; information for production planning specified in the process plan;

Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 240: Protocole d'application: Plan des processus pour produits usinés

General Information

• Status: Published
• Publication Date: 08-Dec-2005
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: ISO/TC 184/SC 4 - Industrial data
• Drafting Committee: ISO/TC 184/SC 4/WG 12 - STEP product modelling and resources
• Current Stage: 9060 - Close of review
• Start Date: 04-Mar-2029

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 10303-240
First edition
2005-12-15

Industrial automation systems and
integration — Product data
representation and exchange —
Part 240:
Application protocol: Process plans for
machined products
Systèmes d'automatisation industrielle et intégration — Représentation
et échange de données de produits —
Partie 240: Protocole d'application: Plan des processus pour produits
usinés



Reference number
ISO 10303-240:2005(E)
©
ISO 2005

---------------------- Page: 1 ----------------------
ISO 10303-240:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 10303-240:2005(E)
Contents Page
1 Scope . 1
2 Normative references . 3
3 Terms, definitions and abbreviations . 5
3.1 Terms defined in ISO 10303-1 . 5
3.2 Terms defined in ISO 10303-21 . 6
3.3 Terms defined in ISO 10303-31 . 6
3.4 Other definitions . 6
3.5 Abbreviations . 8
4 Information requirements . 9
4.1 Units of functionality . 10
4.1.1 administrative . 10
4.1.2 design_exception . 11
4.1.3 library_reference . 11
4.1.4 manufacturing_machine_tool_resources . 11
4.1.5 manufacturing_part_properties . 12
4.1.6 manufacturing_process_requirement_documents . 13
4.1.7 measurement_limitations . 14
4.1.8 part_model . 15
4.1.9 process_activities . 15
4.1.10 process_plan . 17
4.1.11 shape_representation_for_process_planning . 17
4.2 Application objects . 18
4.3 Application assertions . 127
5 Application interpreted model . 152
5.1 Mapping specification . 152
5.1.1 administrative UoF . 154
5.1.2 design_exception UoF . 157
5.1.3 library_reference UoF . 161
5.1.4 manufacturing_machine_tool_resources UoF . 169
5.1.5 manufacturing_part_properties UoF . 192
5.1.6 manufacturing_process_requirement_documents UoF . 204
5.1.7 measurement_limitations UoF . 230
5.1.8 part_model UoF . 252
5.1.9 process_activities UoF . 261
5.1.10 process_plan UoF .
...