Plain bearings with liquid lubrication — Lubricant supply arrangements and monitoring

This document provides requirements and guidance on lubricant supply arrangements and monitoring for liquid-lubricated bearings (plain bearing assemblies) such as those specified in ISO 11687 (all parts). This document is intended to assist the design of oil-based lubrication systems for hydrodynamic plain bearings mainly to be used in large-scale rotating machinery for power generation, industry and transportation. This document focuses on the most important requirements and characteristics of lubricant supply arrangements and monitoring for plain bearings. Additional standards such as ISO 10438‑1, ISO 10438‑2 and ISO 10438‑3 would be needed to design complete low-pressure or high-pressure lubrication systems, along with their corresponding components. Wherever this document specifies a particular form of solution, whether design or operation, different solutions can be selected provided they are justified by engineering assessment or reference to similar systems already in operation.

Paliers lisses à lubrification fluide — Equipements de graissage et de surveillance

General Information

Status
Published
Publication Date
25-Mar-2019
Current Stage
9093 - International Standard confirmed
Completion Date
13-Jun-2024
Ref Project

Buy Standard

Standard
ISO 19349:2019 - Plain bearings with liquid lubrication — Lubricant supply arrangements and monitoring Released:26. 03. 2019
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 19349:2019 - Plain bearings with liquid lubrication -- Lubricant supply arrangements and monitoring
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 19349
First edition
2019-03
Plain bearings with liquid
lubrication — Lubricant supply
arrangements and monitoring
Paliers lisses à lubrification fluide — Equipements de graissage et de
surveillance
Reference number
ISO 19349:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 19349:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 19349:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Lubrication arrangements . 1
4.1 Self-contained bearings . 1
4.2 Circulated lubrication (forced lubrication) . 1
4.2.1 General. 1
4.2.2 Oil feed and oil return . . . 2
4.2.3 Oil reservoirs . 2
4.3 Hydrostatic lubrication . 3
5 Lubricants . 3
5.1 Suitable lubricants for plain bearings . 3
5.2 Oil cleanliness . 4
6 Lubricant heating . 4
7 Monitoring . 5
7.1 Requirements for design or selection of the lubrication monitoring system . 5
7.2 Requirements for through-life operation of the overall bearing and lubrication system . 5
Bibliography .
...

INTERNATIONAL ISO
STANDARD 19349
First edition
2019-03
Plain bearings with liquid
lubrication — Lubricant supply
arrangements and monitoring
Paliers lisses à lubrification fluide — Equipements de graissage et de
surveillance
Reference number
ISO 19349:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 19349:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 19349:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Lubrication arrangements . 1
4.1 Self-contained bearings . 1
4.2 Circulated lubrication (forced lubrication) . 1
4.2.1 General. 1
4.2.2 Oil feed and oil return . . . 2
4.2.3 Oil reservoirs . 2
4.3 Hydrostatic lubrication . 3
5 Lubricants . 3
5.1 Suitable lubricants for plain bearings . 3
5.2 Oil cleanliness . 4
6 Lubricant heating . 4
7 Monitoring . 5
7.1 Requirements for design or selection of the lubrication monitoring system . 5
7.2 Requirements for through-life operation of the overall bearing and lubrication system . 5
Bibliography .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.