Industrial automation systems and integration — Standardized procedures for production systems engineering — Part 5: Manufacturing change management

This document specifies a formal description of the manufacturing change management (MCM) processes to provide an organizational and technical solution for the comprehensive mapping and processing of changes between production planning and operations. The aim of this document is to uniformly capture and track change measures, and to sensibly forecast and coordinate the capacities required for change processes in the planning and production departments. This document presents a data-oriented view for implementation of MCM. The most important aspect of the data-oriented view is that the central change element is linked to the objects of the digital factory (i.e. the process, the product and the resource). The basis for MCM and the different views presented in this document are production planning processes. ISO/TR 18828‑1 gives an overview of the ISO 18828 series and links the MCM to the other parts of ISO 18828, focussing on production planning processes, as well as information flows and key performance indicators. The following aspects are covered within this document: — processes of MCM; — roles in MCM; — data-oriented view of MCM; — workflow of MCM.

Systèmes d'automatisation industrielle et intégration — Procédures normalisées pour l'ingénierie des systèmes de production — Partie 5: Gestion du changement de fabrication

General Information

Status
Published
Publication Date
23-Jan-2019
Current Stage
9060 - Close of review
Start Date
02-Sep-2029
Ref Project

Buy Standard

Standard
ISO 18828-5:2019 - Industrial automation systems and integration -- Standardized procedures for production systems engineering
English language
30 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 18828-5
First edition
2019-01
Industrial automation systems
and integration — Standardized
procedures for production systems
engineering —
Part 5:
Manufacturing change management
Systèmes d'automatisation industrielle et intégration — Procédures
normalisées pour l'ingénierie des systèmes de production —
Partie 5: Gestion du changement de fabrication
Reference number
ISO 18828-5:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 18828-5:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 18828-5:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 3
5 Process-oriented view of manufacturing change management . 4
6 Detailed description of process 0 . 5
7 Detailed description of process 1 . 6
8 Detailed description of process 11 . 6
9 Detailed description of process 12 . 8
10 Detailed description of process 2 . 9
11 Manufacturing change management roles .10
12 Data-oriented view of manufacturing change management .12
Annex A (informative) Deviation of current states of real system and planning .16
Annex B (informative) Detailed processes of MCM (IDEF3) .17
Annex C (informative) Connection of process and data of MCM .25
Annex D (informative) Sequence diagrams (UML) .28
Bibliography .30
© ISO 2019 – All rights reserved iii

---------------------- Page: 3 --------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.