ISO 11007-1:2021/Amd 1:2023

Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases — Part 1: Dynamic wet conditions — Amendment 1: Test bearings

Produits pétroliers et lubrifiants — Détermination des caractéristiques antirouille des graisses lubrifiantes — Partie 1: Conditions dynamiques humides — Amendement 1: Roulements d'essai

General Information

• Status: Published
• Publication Date: 08-May-2023
• ICS: 75.100 - Lubricants, industrial oils and related products
• Technical Committee: ISO/TC 28 - Petroleum and related products, fuels and lubricants from natural or synthetic sources
• Drafting Committee: ISO/TC 28 - Petroleum and related products, fuels and lubricants from natural or synthetic sources
• Current Stage: 6060 - International Standard published
• Start Date: 09-May-2023
• Due Date: 26-Feb-2024
• Completion Date: 09-May-2023

Relations

• Amends: ISO 11007-1:2021 - Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases — Part 1: Dynamic wet conditions
• Effective Date: 27-Aug-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 11007-1
First edition
2021-07
AMENDMENT 1
2023-05
Petroleum products and lubricants —
Determination of rust-prevention
characteristics of lubricating
greases —
Part 1:
Dynamic wet conditions
AMENDMENT 1: Test bearings
Produits pétroliers et lubrifiants — Détermination des
caractéristiques antirouille des graisses lubrifiantes —
Partie 1: Conditions dynamiques humides
AMENDEMENT 1: Roulements d'essai
Reference number
ISO 11007-1:2021/Amd.1:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 11007-1:2021/Amd.1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 11007-1:2021/Amd.1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible
...

DRAFT AMENDMENT
ISO 11007-1:2021/DAM 1
ISO/TC 28 Secretariat: NEN
Voting begins on: Voting terminates on:
2022-11-17 2023-02-09
Petroleum products and lubricants — Determination of
rust-prevention characteristics of lubricating greases —
Part 1:
Dynamic wet conditions
AMENDMENT 1: Test bearings
ICS: 75.100
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11007-1:2021/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 1 ----------------------
ISO 11007-1:2021/DAM 1:2022(E)
DRAFT AMENDMENT
ISO 11007-1:2021/DAM 1
ISO/TC 28 Secretariat: NEN
Voting begins on: Voting terminates on:

Petroleum products and lubricants — Determination of
rust-prevention characteristics of lubricating greases —
Part 1:
Dynamic wet conditions
AMENDMENT 1: Test bearings
ICS: 75.100
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at
...

PROJET D’AMENDEMENT
ISO 11007-1:2021/DAM 1
ISO/TC 28 Secrétariat: NEN
Début de vote: Vote clos le:
2022-11-17 2023-02-09
Produits pétroliers et lubrifiants — Détermination des
caractéristiques antirouille des graisses lubrifiantes —
Partie 1:
Conditions dynamiques humides
AMENDEMENT 1: Roulements d'essai
Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating
greases —
Part 1: Dynamic wet conditions
AMENDMENT 1: Test bearings
ICS: 75.100
CE DOCUMENT EST UN PROJET DIFFUSÉ POUR
OBSERVATIONS ET APPROBATION. IL EST DONC
SUSCEPTIBLE DE MODIFICATION ET NE PEUT
ÊTRE CITÉ COMME NORME INTERNATIONALE
AVANT SA PUBLICATION EN TANT QUE TELLE.
Le présent document est distribué tel qu’il est parvenu du secrétariat du comité.
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES
FINS INDUSTRIELLES, TECHNOLOGIQUES ET
COMMERCIALES, AINSI QUE DU POINT DE VUE
DES UTILISATEURS, LES PROJETS DE NORMES
INTERNATIONALES DOIVENT PARFOIS ÊTRE
CONSIDÉRÉS DU POINT DE VUE DE LEUR
POSSIBILITÉ DE DEVENIR DES NORMES
POUVANT SERVIR DE RÉFÉRENCE DANS LA
RÉGLEMENTATION NATIONALE.
Numéro de référence
LES DESTINATAIRES DU PRÉSENT PROJET ISO 11007-1:2021/DAM 1:2022(F)
SONT INVITÉS À PRÉSENTER, AVEC LEURS
OBSERVATIONS, NOTIFICATION DES DROITS
DE PROPRIÉTÉ DONT ILS AURAIENT
ÉVENTUELLEMENT CONNAISSANCE ET À
© ISO 2022
FOURNIR UNE DOCUMENTATION EXPLICATIVE.

---------------------- Page: 1 ----------------------
ISO 11007-1:2021/DAM 1:2022(F)
ISO/TC 28
ISO 11007-1:2021/DAM 1:2022(F)
Secrétariat: NEN

Produits pétroliers et lubrifiants - Détermination des
caractéristiques antirouille des graisses lubrifiantes - Partie 1 :
Conditions dynamiques humides
AMENDEMENT 1: Roulements d’essai

Petroleum products and lubricants — Determination of rust-prevention characteristics of
lubricating greases — Part 1: Dynamic wet conditions
AMENDMENT 1: Test bearings

ICS : 75.100
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2022
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune p
...