ISO/IEC/IEEE 8802-1Q:2020/FDAmd 2
(Amendment)YANG data model
YANG data model
General Information
RELATIONS
Standards Content (sample)
FINAL
ISO/IEC/IEEE
AMENDMENT
DRAFT
8802-1Q:2020
FDAM 2
ISO/IEC JTC 1/SC 6
Telecommunications and exchange
Secretariat: KATS
between information technology
Voting begins on:
2021-03-11 systems — Requirements for local and
metropolitan area networks —
Voting terminates on:
2021-07-29
Part 1Q:
Bridges and bridged networks
AMENDMENT 2: YANG data model
Télécommunications et échange entre systèmes informatiques —
Exigences pour les réseaux locaux et métropolitains —
Partie 1Q: Ponts et réseaux pontés
AMENDEMENT 2
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEC/IEEE 8802-1Q:2020/FDAM 2:2021(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. IEEE 2018
---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 8802-1Q:2020/FDAM 2:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© IEEE 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland
ii © IEEE 2018 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 8802-1Q:2020/FDAM 2:2021(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO/IEC documents should be noted.IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details
of any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC list of patent
declarations received (see patents.iec.ch).Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.
ISO/IEC/IEEE 8802-1Q:2020/Amd 2 was prepared by the LAN/MAN of the IEEE Computer Society (as
IEEE Std 802.1Qcp-2018) and drafted in accordance with its editorial rules. It was adopted, under the
“fast-track procedure” defined in the Partner Standards Development Organization cooperation
agreement between ISO and IEEE, by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 6, Telecommunications and information exchange between systems.A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.© IEEE 2018 – All rights reserved iii
---------------------- Page: 3 ----------------------
IEEE Std 802.1Qcp™-2018
(Amendment to
IEEE Std 802.1Q™-2018)
IEEE Standard for
Local and metropolitan area networks—
Bridges and Bridged Networks—
Amendment 30: YANG Data Model
Sponsor
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 14 June 2018
IEEE-SA Standards Board
---------------------- Page: 4 ----------------------
ISO/IEC/IEEE 8802-1Q:2020/Amd.2:2021(E)
Abstract: A YANG data model in support of configuration and operational status information for a
subset of Bridging capabilities is provided in this amendment to IEEE Std 802.1Q™-2018.
Keywords: Bridged Local Area Networks, IEEE 802 , IEEE 802.1Q™, IEEE 802.1Qcp™, local
area networks (LANs), MAC Bridges, metropolitan area networks, Virtual Bridged Local Area
Networks (virtual LANs), YANGThe Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2018 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 14 September 2018. Printed in the United States of America.
IEEE and 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of
Electrical and Electronics Engineers, Incorporated.PDF: ISBN 978-1-5044-4927-4 STD23138
Print: ISBN 978-1-5044-4928-1 STDPD23138
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.Copyright © 2018 IEEE. All rights reserved.
---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 8802-1Q:2020/Amd.2:2021(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These notices
and disclaimers, or a reference to this page, appear in all standards and may be found under the heading
“Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be obtained on
request from IEEE or viewed at http://standards.ieee.org/IPR/disclaimers.html.Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE
Standards are documents developed through scientific, academic, and industry-based technical working
groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate
without compensation from IEEE. While IEEE administers the process and establishes rules to promote
fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards
documents are responsible for determining and complying with all appropriate safety, security,
environmental, health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of
material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to
the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and
issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE
standard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON
ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Copyright © 2018 IEEE. All rights reserved.
---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 8802-1Q:2020/Amd.2:2021(E)
Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the
provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
CopyrightsIEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.Copyright © 2018 IEEE. All rights reserved.
---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 8802-1Q:2020/Amd.2:2021(E)
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to
photocopy portions of any individual standard for company or organizational internal use or individual, non-
commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center,
Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to
photocopy portions of any individual standard for educational classroom use can also be obtained through
the Copyright Clearance Center.Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. A current IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http://
ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more information about the IEEE-
SA or IEEE’s standards development process, visit the IEEE-SA Website at http://standards.ieee.org.
ErrataErrata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http://
standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata
periodically.Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the
existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has
filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-
SA Website at http://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate
whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or
under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair
discrimination to applicants desiring to obtain such licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their
own responsibility. Further information may be obtained from the IEEE Standards Association
Copyright © 2018 IEEE. All rights reserved.---------------------- Page: 8 ----------------------
ISO/IEC/IEEE 8802-1Q:2020/Amd.2:2021(E)
Participants
At the time of approval of this standard, the IEEE 802.1 Working Group had the following membership:
Glenn Parsons, ChairJohn Messenger, Vice Chair
János Farkas, Chair, Time-Sensitive Networking Task Group
Marc Holness, Editor
Ralf Assmann Marina Gutierrez Maximilian Riegel
Shenghua Bao Stephen Haddock Jessy V. Rouyer
Jens Bierschenk Mark Hantel Atsushi Sato
Steinar Bjornstad Lokesh Kabra Frank Schewe
Christian Boiger Michael Karl Michael Seaman
Paul Bottorff Stephan Kehrer Johannes Specht
Radhakrishna Canchi Hajime Koto Patricia Thaler
David Chen Christophe Mangin Paul Unbehagen
Feng Chen Scott Mansfield Xinyuan Wang
Weiying Cheng James McIntosh Tongtong Wang
Paul Congdon Tero Mustala Hao Wang
Rodney Cummings Tomoki Ohsawa Karl Weber
Hesham Elbakoury Donald R. Pannell Brian Weis
Norman Finn Walter Pienciak Jordon Woods
Geoffrey Garner Michael Potts Takahiro Yamaura
Eric W. Gray Wei Qiu Xiang Yu
Craig Gunther Karen Randall Nader Zein
The following members of the individual balloting committee voted on this standard. Balloters may have
voted for approval, disapproval, or abstention.Randall Groves
Thomas Alexander Charles Moorwood
Stephen Haddock Nick S. A. Nikjoo
Richard Alfvin
Paul Nikolich
Butch Anton Mark Hantel
Satoshi Obara
Stefan Aust Marco Hernandez
Bansi Patel
Gordon Bechtel Werner Hoelzl
Alon Regev
David Black Noriyuki Ikeuchi
Maximilian Riegel
Christian Boiger Atsushi Ito
Robert Robinson
Nancy Bravin Raj Jain
Benjamin Rolfe
Dietmar Bruckner SangKwon Jeong
Jessy V. Rouyer
Demetrio Bucaneg, Jr. Peter Jones
Michael Seaman
Stephen Bush Piotr Karocki
Daniel Smith
William Byrd Stephan Kehrer
Thomas Starai
Juan Carreon Stuart Kerry
Walter Struppler
Keith Chow Yongbum Kim
Mark-Rene Uchida
Charles Cook Hyeong Ho Lee
Dmitri Varsanofiev
Rodney Cummings James Lepp
George Vlantis
Sourav Dutta Jon Lewis
Khurram Waheed
János Farkas Michael Lynch
Andreas Wolf
Norman Finn Elvis Maculuba
Chun Yu Charles Wong
Avraham Freedman Arthur Marris
Oren Yuen
Eric W. Gray Richard Mellitz
Zhen Zhou
Copyright © 2018 IEEE. All rights reserved.
---------------------- Page: 9 ----------------------
ISO/IEC/IEEE 8802-1Q:2020/Amd.2:2021(E)
When the IEEE-SA Standards Board approved this standard on 14 June 2018, it had the following
membership:Jean-Philippe Faure, Chair
Gary Hoffman, Vice Chair
John D. Kulick, Past Chair
Konstantinos Karachalios, Secretary
Chuck Adams Thomas Koshy Robby Robson
Masayuki Ariyoshi Joseph L. Koepfinger* Dorothy Stanley
Ted Burse Kevin Lu Adrian Stephens
Stephen Dukes Daleep Mohla Mehmet Ulema
Phil Wennblom
Damir Novosel
Doug Edwards
Howard Wolfman
Ronald C. Petersen
J. Travis Griffith
Yu Yuan
Annette D. Reilly
Michael Janezic
*Member Emeritus
Copyright © 2018 IEEE. All rights reserved.
---------------------- Page: 10 ----------------------
ISO/IEC/IEEE 8802-1Q:2020/Amd.2:2021(E)
Introduction
This introduction is not part of IEEE Std 802.1Qcp-2018, IEEE Standard for Local and metropolitan area networks—
Bridges and Bridged Networks—Amendment 30: YANG Data Model.This amendment to IEEE Std 802.1Q-2018 specifies a YANG data model that provides configuration and
operational status reporting for IEEE 802.1Q Two-Port MAC Relay, Customer VLAN Bridges, and Provider
Bridges.This standard contains state-of-the-art material. The area covered by this standard is undergoing evolution.
Revisions are anticipated within the next few years to clarify existing material, to correct possible errors, and
to incorporate new related material. Information on the current revision state of this and other IEEE 802
standards may be obtained fromSecretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854
USA
Copyright © 2018 IEEE. All rights reserved.
---------------------- Page: 11 ----------------------
ISO/IEC/IEEE 8802-1Q:2020/Amd.2:2021(E)
Contents
1. Overview ........................................................................................................................................... 12
1.3 Introduction............................................................................................................................ 12
2. Normative references......................................................................................................................... 13
4. Abbreviations .................................................................................................................................... 14
5. Conformance ..................................................................................................................................... 15
5.4 VLAN Bridge component requirements................................................................................ 15
5.13 MAC Bridge component requirements.................................................................................. 15
5.16 TPMR conformance............................................................................................................... 15
8. Principles of Bridge operation .......................................................................................................... 16
8.12 Bridge Management Entity.................................................................................................... 16
8.13 Addressing ............................................................................................................................. 16
12. Bridge management .......................................................................................................................... 17
12.10 Bridge VLAN managed objects............................................................................................. 17
48. YANG Data Model ........................................................................................................................... 18
48.1 YANG Framework................................................................................................................. 18
48.2 Security considerations .......................................................................................................... 19
48.3 IEEE 802.1Q YANG model .................................................................................................. 21
48.4 Structure of the YANG model ............................................................................................... 31
48.5 Relationship to IEEE 802.1Q managed objects..................................................................... 33
48.6 Definition of IEEE 802.1Q YANG modules ......................................................................... 39
Annex A (normative) PICS proforma—Bridge implementations ................................................................ 90
A.5 Major capabilities................................................................................................................... 90
A.48 YANG.................................................................................................................................... 90
Annex U (informative) Bibliography ............................................................................................................ 91
Copyright © 2018 IEEE. All rights reserved.---------------------- Page: 12 ----------------------
ISO/IEC/IEEE 8802-1Q:2020/Amd.2:2021(E)
List of figures
Figure 48-1—General YANG hierarchy ....................................................................................................... 18
Figure 48-2—YANG root hierarchy with IEEE 802.1Q YANG modules.................................................... 19
Figure 48-3—UML YANG interface management model............................................................................ 22
Figure 48-4—Generic IEEE 802.1Q bridge mode ........................................................................................ 23
Figure 48-5—Bridge port model ................................................................................................................... 24
Figure 48-6—TPMR model........................................................................................................................... 25
Figure 48-7—TPMR port model ................................................................................................................... 26
Figure 48-8—Provider Bridge model ............................................................................................................ 28
Figure 48-9—Provider Edge Bridge C-VLAN Interface mode..................................................................... 29
Figure 48-10—Provider Edge Bridge S-VLAN interface model .................................................................. 30
Copyright © 2018 IEEE. All rights reserved.---------------------- Page: 13 ----------------------
ISO/IEC/IEEE 8802-1Q:2020/Amd.2:2021(E)
List of tables
Table 48-1—Structure of the YANG modules .............................................................................................. 31
Table 48-2—Structure of the ieee802-dot1q-bridge module......................................................................... 31
Table 48-3—Structure of the ieee802-dot1q-tpmr module ........................................................................... 32
Table 48-4—Structure of the ieee802-dot1q-vlan-bridge module................................................................. 32
Table 48-5—Structure of the ieee802-dot1q-pb module............................................................................... 32
Table 48-6—Bridge cross-reference table..................................................................................................... 33
Table 48-7—Bridge component cross-reference table .................................................................................. 34
Table 48-8—Bridge component filtering database cross-reference table...................................................... 35
Table 48-9—Bridge component permanent database cross-reference table.................................................. 36
Table 48-10—Bridge component Bridge VLAN cross-reference table ........................................................ 36
Table 48-11—Bridge component Bridge MST cross-reference table ........................................................... 37
Table 48-12—Bridge port cross-reference table............................................................................................ 38
Copyright © 2018 IEEE. All rights reserved.---------------------- Page: 14 ----------------------
ISO/IEC/IEEE 8802-1Q:2020/Amd.2:2021(E)
IEEE Std 802.1Qcp-2018
IEEE Standard for Local and Metropolitan Area Networks—Bridges and Bridged Networks—
Amendment 30: YANG Data ModelIEEE Standard for
Local and metropolitan area networks—
Bridges and Bridged Networks—
Amendment 30: YANG Data Model
(This amendment is based on IEEE Std 802.1Q™-2018)
NOTE—The editing instructions contained in this amendment define how to merge the material contained here into the
base document and its other amendments to form the new comprehensive standard.Editing instructions are shown in bold italic. Four editing instructions are used: change, delete, insert, and replace.
Change is used to make corrections in existing text or tables. The editing instruction specifies the location of the change
and describes what is being changed by using strikethrough (to remove old material) and underscore (to add new
material). Delete removes existing material. Insert adds new material without disturbing the existing material. Insertions
may require renumbering. If so, renumbering instructions are given in the editing instruction. Replace is used to make
changes in f...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.