Ships and marine technology — Transmitting heading devices (THDs) — Part 1: Gyro-compasses

ISO 22090-1:2014 specifies the construction, performance, and testing of gyro-compasses as transmitting heading device required by chapter V, SOLAS 1974 (as amended).

Navires et technologie maritime — Dispositifs de pilotage à transmission de données — Partie 1: Compas gyroscopiques

General Information

Status
Published
Publication Date
23-Feb-2014
Current Stage
9092 - International Standard to be revised
Completion Date
09-Nov-2023
Ref Project

Relations

Buy Standard

Standard
ISO 22090-1:2014 - Ships and marine technology -- Transmitting heading devices (THDs)
English language
13 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 22090-1
Second edition
2014-03-01
Ships and marine technology —
Transmitting heading devices
(THDs) —
Part 1:
Gyro-compasses
Navires et technologie maritime — Dispositifs de pilotage à
transmission de données —
Partie 1: Compas gyroscopiques
Reference number
ISO 22090-1:2014(E)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 22090-1:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 22090-1:2014(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Performance requirements . 4
4.1 Functionality . 4
4.2 Continuous operation . 4
4.3 Information . 4
4.4 Fore and aft mark . 4
4.5 Speed error correction . 4
4.6 Heading information . 5
4.7 Status indication . 5
4.8 Alert signal . 5
4.9 Interface . 5
5 Accuracy . 5
5.1 General . 5
5.2 Accuracy of transmission data . 5
5.3 Accuracy under static condition . 6
5.4 Accuracy under dynamic condition .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.