Information technology — Office equipment — Method for the determination of ink cartridge yield for colour photo printing with inkjet printers and multi-function devices that contain inkjet printer components

The purpose of this document is to provide a method to determine the ink cartridge yield of ink-containing cartridges (i.e. integrated ink cartridges and ink cartridges without integrated print heads) for colour photo printing with colour inkjet printers and multifunction devices that contain inkjet printer components. In the case where a cartridge set can be used in multiple printer models, only one yield test is performed as long as the difference between printer models does not impact yield. NOTE A cartridge supplier can choose to use more than one market identifier for a single physical cartridge. In this case only one yield test is required as long as there are no differences in the cartridges other than market identifiers. This document prescribes the following: — the test method that manufacturers, test laboratories, etc. use to determine ink cartridge yield; — the method for determination of declared cartridge yield values for photo printing from the test results; and — the appropriate method of describing the cartridge yield for photo printing in documentation supplied to the consumer by the manufacturer. This document is only intended for the determination of ink cartridge yield. No other claims can be made from this testing regarding quality, reliability, etc. This document can be used to determine the yield of any cartridge that is used during the printing of the photo test file defined in ISO/IEC 29103. This document is not for use with printers whose minimum printable size is equal to or greater than A3. This document is not intended to measure the yield of photo printing on paper size larger than 4" × 6", L or A6. In addition, this document is not for use with industrial printers or point of sale printers. It only applies to desktop printing systems.

Titre manque

General Information

Status
Published
Publication Date
05-Oct-2023
Current Stage
6060 - International Standard published
Start Date
06-Oct-2023
Due Date
02-Aug-2023
Completion Date
06-Oct-2023
Ref Project

Relations

Buy Standard

Standard
ISO/IEC 29102:2023 - Information technology — Office equipment — Method for the determination of ink cartridge yield for colour photo printing with inkjet printers and multi-function devices that contain inkjet printer components Released:6. 10. 2023
English language
28 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/IEC 29102 - Information technology — Office equipment — Method for the determination of ink cartridge yield for colour photo printing with inkjet printers and multi-function devices that contain inkjet printer components Released:8/4/2023
English language
28 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
REDLINE ISO/IEC 29102 - Information technology — Office equipment — Method for the determination of ink cartridge yield for colour photo printing with inkjet printers and multi-function devices that contain inkjet printer components Released:8/4/2023
English language
28 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 29102
Third edition
2023-10
Information technology — Office
equipment — Method for the
determination of ink cartridge
yield for colour photo printing with
inkjet printers and multi-function
devices that contain inkjet printer
components
Reference number
ISO/IEC 29102:2023(E)
© ISO/IEC 2023

---------------------- Page: 1 ----------------------
ISO/IEC 29102:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO/IEC 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 29102:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test parameters and conditions .4
4.1 Set up . 4
4.2 Sample size . 5
4.3 Print mode . 5
4.4 Print environment . 6
4.5 Paper . 6
4.6 Maintenance . 7
4.7 Test files . 7
5 Test methodology . 7
5.1 Testing procedure . 7
5.1.1 Flow chart . 7
5.1.2 Preparation . 8
5.1.3 Installation of test cartridges . 8
5
...

INTERNATIONAL ISO/IEC
STANDARD 29102
Third edition
Information technology — Office
equipment — Method for the
determination of ink cartridge
yield for colour photo printing with
inkjet printers and multi-function
devices that contain inkjet printer
components
PROOF/ÉPREUVE
Reference number
ISO/IEC 29102:2023(E)
© ISO/IEC 2023

---------------------- Page: 1 ----------------------
ISO/IEC 29102:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO/IEC 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 29102:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test parameters and conditions .4
4.1 Set up . 4
4.2 Sample size . 5
4.3 Print mode . 5
4.4 Print environment . 6
4.5 Paper . 6
4.6 Maintenance . 7
4.7 Test files . 7
5 Test methodology . 7
5.1 Testing procedure . 7
5.1.1 Flow chart . 7
5.1.2 Preparation . 8
5.1.3 Installation of test cartridges .
...

INTERNATIONAL STANDARD
ISO/IEC DIS PRF 29102:2022(E)
Third edition
2022-09-22
ISO/IEC JTC 1/SC 28
Secretariat: JISC
Date: 2023-08-03
Information technology — Office equipment — Method for the
determination of ink cartridge yield for colour photo printing
with inkjet printers and multi-function devices that contain inkjet
printer components
Technologies de l'information — Équipement de bureau — Méthode d'essai de la détermination du
rendement des cartouches d'encre pour l'impression de photographies en couleurs avec des
imprimantes à jet d'encre et des dispositifs multi-fonctions contenant des composants d'imprimantes à
jet d'encre

---------------------- Page: 1 ----------------------
PROOF stage

---------------------- Page: 2 ----------------------
ISO/IEC DISPRF 29102:20222023(E)
© ISO 2022 /IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO'sISO’s member body in the country of the requester.
ISO Copyright Office copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: E-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland.
© ISO/IEC 2023 – All rights reserved iii
© ISO 2022 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC DISPRF 29102:20222023(E)
Contents
Foreword . vi
Introduction .v ii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Test parameters and conditions . 4
4.1 Set up . 4
4.2 Sample size . 5
4.3 Print mode . 6
4.4 Print environment . 7
4.5 Paper . 7
4.6 Maintenance . 8
4.7 Test files . 8
5 Test methodology . 8
5.1 Testing procedure . 8
5.1.1 Flow chart . 8
5.1.2 Preparation . 8
5.1.3 Installation of test cartridges .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.