Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1: Flying toys

Sécurité des jouets — Partie 1: Aspects de sécurité relatifs aux propriétés mécaniques et physiques — Amendement 1: Jouets volants

General Information

Status
Withdrawn
Publication Date
16-Jun-2020
Current Stage
9599 - Withdrawal of International Standard
Completion Date
15-Sep-2022
Ref Project

Relations

Buy Standard

Standard
ISO 8124-1:2018/Amd 1:2020 - Flying toys
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 8124-1:2018/Amd 1:2020 - Flying toys
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 8124-1
Fifth edition
2018-03
AMENDMENT 1
2020-06
Safety of toys —
Part 1:
Safety aspects related to mechanical
and physical properties
AMENDMENT 1: Flying toys
Sécurité des jouets —
Partie 1: Aspects de sécurité relatifs aux propriétés mécaniques et
physiques
AMENDEMENT 1: Jouets volants
Reference number
ISO 8124-1:2018/Amd.1:2020(E)
©
ISO 2020

---------------------- Page: 1 ----------------------
ISO 8124-1:2018/Amd.1:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8124-1:2018/Amd.1:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 181, Safety of toys.
A list of all parts in the ISO 8124 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO 2020 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 8124-1:2018/Amd.1:2020(E)
Safety of toys —
Part 1:
Safety aspects related to mechanical and physical
properties
AMENDMENT 1: Flying toys

Replace the existing terminological entries 3.24 and 3.38 with the following:
3.24
free flight
unconstrained travel through the air
Note 1 to entry: This includes portions of unconstrained travel that may ultimately be constrained by means of
a tether.
3.38
leading edge
area of the projectile or flying toy (e.g. tips, edges or protrusions) which would be expected to make
contact with the eyeball
Note 1 to entry: This includes all areas on projectiles or flying toys that travel in unpredictable orientations (e.g.
tumbling) that could reasonably be expected to strike the eyeball.

Add the following new terminological entries:
3.86
flying toy
toy or part of a toy intended to be launched into free flight with an on-board energy source (e.g.
compressed gas, springs, electricity or inertial energy) that continues to propel the object after the
initial release, for part or all of the flight
3.87
remote-controlled flying toy
flying toy with a mass of no more than 250 g, capable of being remotely controlled (e.g. by a wireless
transmitter)
Note 1 to entry: Wireless transmitters are typically hand-held devices and include smart devices such as
telephones and tablets.
EXAMPLE Drones and helicopters.

Replace the existing 4.19 with the following:
4.19  Flying toys
See E.33.
4.19.1  General
© ISO 2020 – All rights reserved 1

---------------------- Page: 4 ----------------------
ISO 8124-1:2018/Amd.1:2020(E)

Leading edges on rigid parts of flying toys shall not protrude beyond the depth of the gauge shown in
Figure 54 when tested according to 5.36 (tip assessment of rigid projectiles).
Remote-controlled flying toys shall be accompanied by instructions that give the user information on
how to use the toy safely (see B.2.26.2).
4.19.2  Rotor blades on flying toys
These requirements do not apply to flying toys with propellers that normally rotate in the vertical
plane, for example a propeller on an aeroplane.
Rotor blades on flying toys that present the potential for injury shall minimize the potential of rotating
blades causing eye injury. One or more of the following features may accomplish this, for example:
a) The design of the toy prevents the blade ends making contact with the eyes (e.g. a protective ring
around the perimeter of the rotor blade, a cage enclosing the rotor blade or rotor blades are fully
enclosed and not accessible).
b) The blades are made of flexible material that easily bends when a force is applied at the outer end of
the blade perpendicular to the horizontal plane of the blade, and that does not break or permanently
deform when tested according to 5.24.6.6 (perpendicular tension test for rotor blades). The blade
shall bend without breaking and return approximately to its initial position after the test.
c) The blade ends are “clutched” or loosely coupled to the rotor so that the ends are not directly
powered by the rotor drive.
d) A partial ring around the perimeter of the rotor blade.
e) Rotor blades are designed so that the leading edges are protected with a resilient material or
flexible part.
Examples of designs that achieve th
...

FINAL
ISO
AMENDMENT
DRAFT
8124-1:2018
FDAM 1
ISO/TC 181
Safety of toys —
Secretariat: DS
Voting begins on:
Part 1:
2020-03-10
Safety aspects related to mechanical
Voting terminates on:
and physical properties
2020-05-05
AMENDMENT 1: Flying toys
Sécurité des jouets —
Partie 1: Aspects de sécurité relatifs aux propriétés mécaniques et
physiques
AMENDEMENT 1: .
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO 8124-1:2018/FDAM 1:2020(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2020

---------------------- Page: 1 ----------------------
ISO 8124-1:2018/FDAM 1:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8124-1:2018/FDAM 1:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 181, Safety of toys.
A list of all parts in the ISO 8124 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO 2020 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 8124-1:2018/FDAM 1:2020(E)
Safety of toys —
Part 1:
Safety aspects related to mechanical and physical
properties
AMENDMENT 1: Flying toys

Replace the existing terminological entries 3.24 and 3.38 with the following:
3.24
free flight
unconstrained travel through the air
Note 1 to entry: This will include portions of unconstrained travel that may ultimately be constrained by means
of a tether.
3.38
leading edge
area of the projectile or flying toy (e.g. tips, edges or protrusions) which would be expected to make
contact with the eyeball
Note 1 to entry: This includes all areas on projectiles or flying toys that travel in unpredictable orientations (e.g.
tumbling) that could reasonably be expected to strike the eyeball.

Add the following new terminological entries:
3.86
flying toy
toy or part of a toy intended to be launched into free flight with an on-board energy source (e.g.
compressed gas, springs, electricity or inertial energy) that continues to propel the object after the
initial release, for part or all of the flight
3.87
remote-controlled flying toy
flying toy with a mass of no more than 250 g, capable of being remotely controlled (e.g. by a wireless
transmitter)
Note 1 to entry: Wireless transmitters are typically hand-held devices and include smart devices such as
telephones and tablets.
EXAMPLE Drones and helicopters.

Replace the existing 4.19 with the following:
4.19  Flying toys
See E.33
4.19.1  General
© ISO 2020 – All rights reserved 1

---------------------- Page: 4 ----------------------
ISO 8124-1:2018/FDAM 1:2020(E)

Leading edge(s) on rigid parts of flying toys shall not protrude beyond the depth of the gauge shown in
Figure 44 when tested according to 5.36 (tip assessment of rigid projectiles).
Remote-controlled flying toys shall be accompanied by instructions that give the user information on
how to use the toy safely, see B.2.22.2.
4.19.2  Rotor blades on flying toys
These requirements do not apply to flying toys with propellers that normally rotate in the vertical
plane, for example a propeller on an aeroplane.
Rotor blades on flying toys that present the potential for injury shall minimize the potential of rotating
blades causing eye injury. One or more of the following features may accomplish this, for example:
a) The design of the toy prevents the blade ends making contact with the eyes (e.g. a protective ring
around the perimeter of the rotor blade, a cage enclosing the rotor blade or rotor blades are fully
enclosed and not accessible).
b) The blades are made of flexible material that easily bends when a force is applied at the outer end of
the blade perpendicular to the horizontal plane of the blade, and that does not break or permanently
deform when tested according to 5.24.6.6 (perpendicular tension test for rotor blades). The blade
shall bend without breaking and return approximately to its initial position after the test.
c) The blade ends are “clutched” or loosely coupled to the roto
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.