Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011)

This standard specifies a method for the determination of total metals in leather using extraction with an acid artificial perspiration solution and subsequent determination with either Inductively Coupled Plasma – Optical Emission Spectrometry (ICP-OES) or Atomic Absorption Spectrometer (AAS).
This method is especially used to determine the extractable chromium in chromium tanned leathers.

Leder - Chemische Bestimmung des Metallgehaltes - Teil 2: Gesamtmetallgehalt (ISO 17072-2:2011)

1.1   Diese Norm legt ein Verfahren zur Bestimmung des Gehalts sämtlicher Metalle in Leder fest, wobei ein Aufschluss des Leders und danach eine Bestimmung der Metalle mittels optischer Emissionsspektrometrie mit induktiv gekoppeltem Plasma (ICP OES), mittels Massenspektrometrie mit induktiv gekoppeltem Plasma (ICP MS) oder mittels Atomabsorptionsspektrometrie (AAS) durchgeführt werden.
Dieses Prüfverfahren besteht in einer Analyse des gesamten Metallgehalts in Leder; es ist nicht spezifisch für die jeweilige chemische Verbindung oder spezifisch für den Oxidationszustand der Metalle.

Cuir - Détermination chimique de la teneur en métal - Partie 2: Teneur totale en métaux (ISO 17072-2:2011)

L'ISO 17072-2:2011 spécifie une méthode de détermination de la teneur totale en métaux présents dans le cuir par digestion du cuir suivie d'une détermination par spectrométrie d'émission optique avec plasma à couplage inductif (ICP-OES), ou par spectrométrie d'absorption atomique (AAS), ou par spectrométrie de masse avec plasma à couplage inductif (ICP-MS), ou par spectrométrie de fluorescence atomique (SFA).
Cette méthode détermine la teneur totale en métaux présents dans le cuir; elle n'est pas spécifique à un composé ni à l'état d'oxydation des métaux.
La méthode s'applique à la détermination des métaux suivants: aluminium (Al), antimoine (Sb), arsenic (As), baryum (Ba), cadmium (Cd), calcium (Ca), chrome (Cr), cobalt (Co), cuivre (Cu), fer (Fe), plomb (Pb), magnésium (Mg), manganèse (Mn), mercure (Hg), molybdène (Mo), nickel (Ni), potassium (K), sélénium (Se), silicium (Si), sodium (Na), étain (Sn), titane (Ti), zinc (Zn) et zirconium (Zr).
La limite de quantification du plomb total est de 8 mg/kg.
L'ISO 17072-2:2011 ne s'applique pas aux cuirs tannés au chrome. Dans ce cas, l'ISO 5398-1, l'ISO 5398-2, l'ISO 5398-3 ou l'ISO 5398-4 sont utilisées.

Usnje - Kemijsko določevanje kovin - 2. del: Celotni delež kovin (ISO 17072-2:2011)

Ta standard določa metodo za določevanje skupnih kovin v usnju z izločevanjem s kislo raztopino za umetno perspiracijo in nato z določevanjem z optično emisijsko spektrometrijo z induktivno sklopljeno plazmo (ICP-OES) ali z atomskim absorpcijskim spektrometrom (AAS).
Ta metoda se uporablja predvsem za določevanje izločljivega kroma v vrstah usnja, barvanih s kromom.

General Information

Status
Withdrawn
Publication Date
11-Oct-2011
Withdrawal Date
10-Apr-2019
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Apr-2019
Due Date
04-May-2019
Completion Date
11-Apr-2019

Relations

Buy Standard

Standard
EN ISO 17072-2:2011
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Leder - Chemische Bestimmung des Metallgehaltes - Teil 2: Gesamtmetallgehalt (ISO 17072-2:2011)Cuir - Détermination chimique de la teneur en métal - Partie 2: Teneur totale en métaux (ISO 17072-2:2011)Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011)59.140.30Usnje in krznoLeather and fursICS:Ta slovenski standard je istoveten z:EN ISO 17072-2:2011SIST EN ISO 17072-2:2011en,fr,de01-november-2011SIST EN ISO 17072-2:2011SLOVENSKI
STANDARD



SIST EN ISO 17072-2:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 17072-2
February 2011 ICS 59.140.30 English Version
Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011)
Cuir - Détermination chimique de la teneur en métal -Partie 2: Teneur totale en métaux (ISO 17072-2:2011)
Leder - Chemische Bestimmung des Metallgehaltes - Teil 2: Gesamtmetallgehalt (ISO 17072-2:2011) This European Standard was approved by CEN on 12 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17072-2:2011: ESIST EN ISO 17072-2:2011



EN ISO 17072-2:2011 (E) 2 Contents Page Foreword .3SIST EN ISO 17072-2:2011



EN ISO 17072-2:2011 (E) 3 Foreword This document (EN ISO 17072-2:2011) has been prepared by Technical Committee CEN/TC 289 “Leather”, the secretariat of which is held by UNI, in collaboration with the International Union of Leather Technologists and Chemists Societies. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2011, and conflicting national standards shall be withdrawn at the latest by August 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN ISO 17072-2:2011



SIST EN ISO 17072-2:2011



Reference numberISO 17072-2:2011(E)IULTCS/IUC 27-2:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO17072-2IULTCS/IUC27-2First edition2011-02-15Leather — Chemical determination of metal content — Part 2: Total metal content Cuir — Détermination chimique de la teneur en métal — Partie 2: Teneur totale en métaux
SIST EN ISO 17072-2:2011



ISO 17072-2:2011(E) IULTCS/IUC 27-2:2011(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2011 – All rights reserved
SIST EN ISO 17072-2:2011



ISO 17072-2:2011(E) IULTCS/IUC 27-2:2011(E) © ISO 2011 – All rights reserved iii Contents Page Foreword.iv 1 Scope.1 2 Normative references.1 3 Principle.2 4 Reagents.2 5 Apparatus and materials.2 6 Sampling and sample preparation.3 7 Instrumental procedure.4 7.1 Analysis by ICP, AAS and SFA.4 7.1.1 ICP.4 7.1.2 AAS.4 7.2 Analysis by hydride technique.5 7.3 Analysis by SFA technique.5 8 Calculation and expression of results.5 9 Test report.5 Annex A (informative)
Interlaboratory test results.6 Bibliography.7 SIST EN ISO 17072-2:2011



ISO 17072-2:2011(E) IULTCS/IUC 27-2:2011(E) iv © ISO 2011 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 17072-2 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 289, Leather, in collaboration with the Chemical Test Commission of the International Union of Leather Technologists and Chemists Societies (IUC Commission, IULTCS), in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). This method is technically similar to the method in IUC 27-2. IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to further the advancement of leather science and technology. IULTCS has three Commissions, which are responsible for establishing international methods for the sampling and testing of leather. ISO recognizes IULTCS as an international standardizing body for the preparation of test methods for leather. ISO 17072 consists of the following parts, under the general title Leather — Chemical determination of metal content: ⎯ Part 1: Extractable metals ⎯ Part 2: Total metal content SIST EN ISO 17072-2:2011



INTERNATIONAL STANDARD ISO 17072-2:2011(E)IULTCS/IUC 27-2:2011(E) © ISO 2011 – All rights reserved 1 Leather — Chemical determination of metal content — Part 2: Total metal content 1 Scope This part of ISO 17072 specifies a method for the determination of the total metal content in leather using digestion of the leather and subsequent determination with inductively coupled plasma/optical emission spectrometry (ICP/OES), or inductively coupled plasma/mass spectrometry (ICP/MS), or atomic absorption spectrometry (AAS) or spectrometry of atomic fluorescence (SFA). This method determines the total metal content in leather; it is not compound-specific or specific to the oxidation state of the metals. The method is applicable for determining the following metals: Aluminium (Al) Copper (Cu) Potassium (K) Antimony (Sb) Iron (Fe) Selenium (Se) Arsenic (As) Lead (Pb) Silicon (Si) Barium (Ba) Magnesium (Mg) Sodium (Na) Cadmium (Cd) Manganese (Mn) Tin (Sn) Calcium (Ca) Mercury (Hg) Titanium (Ti) Chromium (Cr) (except chromium-tanned leathers)Molybdenum (Mo) Zinc (Zn) Cobalt (Co)
Nickel (
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.