SIST EN 50173-4:2008/A2:2013
(Amendment)Information technology - Generic cabling systems - Part 4: Homes
Information technology - Generic cabling systems - Part 4: Homes
This European Standard specifies generic cabling in homes, installed to support one or more of the following groups of applications and based upon balanced and coaxial cabling as appropriate: 1) Information and Communications Technologies (ICT); 2) Broadcast and Communications Technologies (BCT); 3) Commands, Controls and Communications in Buildings (CCCB). A home may contain one or more buildings or may be within a building that contains more than one home.
Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 4: Wohnungen
Technologies de l'information - Systèmes de câblage générique - Partie 4: Locaux d'habitation
Informacijska tehnologija - Univerzalni sistemi pokabljenja - 4. del: Bivalni prostori - Dopolnilo A2
Ta evropski standard določa univerzalno polaganje kablov v bivalnih prostorih, nameščeno, da podpira eno ali več v nadaljevanju navedenih skupin aplikacij, in, če je primerno, temelječe na uravnoteženem in koaksialnem polaganju kablov: 1) informacijske in komunikacijske tehnologije (ICT); 2) radiofuzijske in komunikacijske tehnologije (BCT); 3) ukazi, kontrole in komunikacija v zgradbah (CCCB). Bivalni prostor lahko vsebuje eno ali več zgradb oziroma je lahko v zgradbi, ki vsebuje več kot en bivalni prostor.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50173-4:2008/A2:2013
01-februar-2013
Informacijska tehnologija - Univerzalni sistemi pokabljenja - 4. del: Bivalni prostori
- Dopolnilo A2
Information technology - Generic cabling systems - Part 4: Homes
Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 4:
Wohnungen
Technologies de l'information - Systèmes de câblage générique - Partie 4: Locaux
d'habitation
Ta slovenski standard je istoveten z: EN 50173-4:2007/A2:2012
ICS:
33.040.50 Vodi, zveze in tokokrogi Lines, connections and
circuits
35.110 Omreževanje Networking
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
SIST EN 50173-4:2008/A2:2013 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50173-4:2008/A2:2013
---------------------- Page: 2 ----------------------
SIST EN 50173-4:2008/A2:2013
EUROPEAN STANDARD
EN 50173-4/A2
NORME EUROPÉENNE
November 2012
EUROPÄISCHE NORM
ICS 33.040.50
English version
Information technology -
Generic cabling systems -
Part 4: Homes
Technologies de l'information - Informationstechnik -
Systèmes de câblage générique - Anwendungsneutrale
Partie 4: Locaux d'habitation Kommunikationskabelanlagen -
Teil 4: Wohnungen
This amendment A2 modifies the European Standard EN 50173-4:2007; it was approved by CENELEC on
2012-11-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,
Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,
Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50173-4:2007/A2:2012 E
---------------------- Page: 3 ----------------------
SIST EN 50173-4:2008/A2:2013
EN 50173-4:2007/A2:2012 – 2 –
Foreword
This document (EN 50173-4:2007/A2:2012) has been prepared by CLC/TC 215 "Electrotechnical
aspects of telecommunication equipment".
The following dates are fixed:
(dop) 2013-11-12
• latest date by which this document has to be implemented
at national level by publication of an identical national
standard or by endorsement
(dow) 2015-11-12
• latest date by which the national standards conflicting with
this document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document introduces optical fibre cabling support within homes. In addition, several editorial
improvements have been introduced.
---------------------- Page: 4 ----------------------
SIST EN 50173-4:2008/A2:2013
– 3 – EN 50173-4:2007/A2:2012
Foreword
Add the following after EN 50173-5:
EN 50173-6 Information technology – Generic cabling systems – Part 6: Distributed building
services
Introduction
st
Amend 1 paragraph to read:
This European Standard specifies generic cabling in homes, installed to support one or more of the
following groups of applications and based upon balanced, coaxial and optical fibre cabling as
appropriate:
rd
Amend 3 paragraph to read:
Backbone cabling connecting individual homes within single premises is built according to the relevant
standard (EN 50173-1, EN 50083 series and EN 60728 series).
Replace Figure 1 by the following figure and add to the list before Figure 1:
- CLC/TR 50173-99-3, Information technology – Generic cabling systems - Part 99-3: Home cabling
infrastructures up to 50 m in length to support simultaneous and non simultaneous provision of
applications
EENN 5009850098-1: C-1: Cuuststoommerer p prrememiisseses EENN 550173-0173-2: In2: Inffoormrmatiatioonn tec techhnnoollogy:ogy:
cablcabliinngg for ifor innffoorrmmatatiioon tn teecchhnnoollogyogy - - GeneGenerriicc c caablbliinngg -- OOffffiicce e prepremmiisseses
IISSDNDN b baasic sic aacccecessss
EENN 5501730173--33: In: Informformatiatioon tecn techhnnoollooggyy: :
EENN 500950098-2: C8-2: Cuuststoommerer p prrememiisseses GenGeneerriicc c caablbliinng g -- IIndustndustrriiaall prepremmiisseess
EENN 5017501733--1: I1: Innformformaattiioon ten tecchhnnoollooggyy::
ccablabliinngg for ifor innffoormrmatatiioon tecn techhnolnology ogy --
EENN 5 50170173-3-4: I4: Innformformatatiioon n tectechhnolnolooggyy:: GenGeneeriricc ccablabliinngg - - GGeneeneralral r reequiquireremementntss
2042048 k8 kbbiitt/s/s IISSDDNN pri primmararyy ac accescesss and and
GGeenerneriicc c cablabliing ng -- HHoommeses
lleaseeasedd l liine nene netwtworkork i inntteerrffacacee
EENN 5015017373-5-5:: I Innforformmatatiion ton teecchhnolnologyogy: :
GenerGeneriicc c cablabliing -ng - DDatata ca ceennttrreess
EENN 501 5017373-6: -6: IInnforformmatatiion on tetecchhnolnologyogy: :
GGeeneneriricc c cablabliing ng –– DDiissttrriibutedbuted bui buillddiinngg
seserrvviicceess
EENN 505017174-14-1:: I Innforformmaattiion ton teechnolchnologyogy. .
CCablabliinngg i innssttalalllaatition -on - SSpecpeciiffiiccaattiion anon and d
ququalaliittyy as assurasurancence
EENN 501 50174-74-2: 2: InforInformmatiation ton teecchnolhnolooggy.y. EENN 503 50310:10: AApplppliiccatiatioonn of e of eqquiuipotpoteennttiialal
CCaabblliinngg i innststalalllaattiionon - - IInsnstatallllatatiioon n bbondiondingng and e and eaarrtthihinngg i inn bubuiilldidinnggss w wiith th
plplaannnniing ng andand prpracactiticesces i innsiside bde buuiillddiingsngs iinnffoorrmmaattiioonn t teechnchnoollogyogy e equiquipmpmenentt
EENN 501 50174-74-3: 3: InforInformmatiation ton teecchnolhnolooggy.y.
CCaabblliinngg i innststalalllaattiionon - - IInsnstatallllatatiioon n
plplaannnniing ng andand pr pracactiticesces outoutsisidede bu buiillddiinnggss
EENN 503 50346: I46: Innformformatatiion on tetecchhnolnologyogy. .
CCaabblliinng ig innststalalllaattiionon - -
TTeessttiningg ooff in inststaallleledd ca cabblliningg
Figure 1 - Schematic relationship between the EN 50173 series and other relevant standards
---------------------- Page: 5 ----------------------
SIST EN 50173-4:2008/A2:2013
EN 50173-4:2007/A2:2012 – 4 –
1 Scope and conformance
1.1 Scope
st
Amend 1 paragraph to read:
This European Standard specifies generic cabling in homes, installed to support one or more of the
following groups of applications and based upon balanced, coaxial and optical fibre cabling as
appropriate:
1.2 Conformance
nd
In the English version, amend 2 sub-bullet of item f) to read “ensured” instead of “assured”.
2 Normative references
Insert the following:
EN 61754-20:2012, Fibre optic interconnecting devices and passive components – Fibre optic
connector interfaces – Part 20: Type LC connector family (IEC 61754-20:2012)
4 Structure of the generic cabling system to support ICT and/or BCT
applications in homes
4.7 Dimensioning and configuring
4.7.1 Distributors
Replace Table 2 with the following:
Table 2 – Maximum channel lengths for reference implementations of ICT, BCT and optical channels
Cabling type
ICT BCT-B BCT-C Optical
100 m 50 m 100 m 100 m
NOTE 1 See 6.3.2.3 and Annex B for performance and length considerations for
BCT channels.
NOTE 2 Some BCT applications may not be supported over the maximum lengths
(see EN 50173-1:2011, Annex F).
NOTE 3 Some implementations of optical channels are not supported over the
maximum lengths (see 6.3.3 for performance and length considerations).
4.7.5.1 General requirements
Amend title to read:
4.7.5.1 General
---------------------- Page: 6 ----------------------
SIST EN 50173-4:2008/A2:2013
– 5 – EN 50173-4:2007/A2:2012
th th th th
Amend 8 , 9 , 10 and 11 paragraphs to read
Additional balanced cables (for ICT and/or BCT applications), coaxial cables (for BCT applications) or
optical fibre cables should be provided as defined by
- the number and mix of applications (e.g. satellite feed, multi-cable feed of CATV, in-house
generated video);
NOTE Some applications, such as direct satellite feeds, use frequencies above 1 000 MHz that are only supported by the
higher bandwidth BCT-C channels.
- the number of application outlets to be served.
For metallic cabling supporting both ICT and BCT channels, the application outlet is termed the
MATO. A MATO may also be used to support CCCB applications where appropriate, see
EN 50173-1:2011, Annex F.
For balanced cabling supporting ICT channels only, the application outlet is termed the TO and uses
connecting hardware specified in 9.2. A TO may also be used to support BCT and CCCB applications
where appropriate, see EN 50173-1:2011, Annex F.
For balanced or coaxial cabling supporting BCT channels only, the application outlet is termed the BO
and uses connecting hardware specified in 9.3. A BO using balanced BCT-B cabling may also be
used to support ICT and CCCB applications where appropriate, see EN 50173-1:2011, Annex F.
th
Insert the following after 11 paragraph:
For optical channels supporting either ICT or BCT channels, the application outlet is termed an optical
TO/BO and terminates a minimum of one cable containing two optical fibres in accordance with
6.3.3.2 using connecting hardware as specified in 9.5.
Insert a new subclause 4.7.5.5:
4.7.5.5 Optical TO/BO
The optical TO/BO shall be located in readily accessible locations in the room, depending on the
design of the building and subject to the requirements of national and local regulations.
Each optical TO/BO shall be terminated in accordance with 9.5.
6 Channel performance in homes
6.1 General
rd
Amend 3 paragraph to read:
The transmission performance of balanced, coaxial and optical fibre cabling channels is specified in
terms of Classes in 6.3.
6.3 Transmission performance
6.3.1 General
th
Insert the following new subclause headings after 6 paragraph:
---------------------- Page: 7 ----------------------
SIST EN 50173-4:2008/A2:2013
EN 50173-4:2007/A2:2012 – 6 –
6.3.2 Balanced and coaxial cabling channels
6.3.2.1 General
Insert the remainder of existing 6.3.1.
Delete NOTE 2 and renumber NOTE 1 into NOTE.
Delete row entitled “Optical channel” in Table 3.
Amend paragraph 9 (after Table 3) to read:
While cabling channels for ICT and CCCB within the home presently are provided via balanced cables
only, channels for BCT may be provided via balanced cable or coaxial cable. The CCCB channel
sp
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.