Textiles - Quantitative chemical analysis - Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) (ISO 1833-20:2009)

This part of ISO 1833 specifies a method using dimethylacetamide to determine the percentage of elastane, after removal of non-fibrous matter, in textiles made of binary mixtures of certain elastane fibres with cotton, viscose, cupro, modal, polyamide, polyester or wool fibres. This method is not applicable when acrylic fibres are present.

Textilien - Quantitative chemische Analysen - Teil 20: Mischungen aus Elasthanfasern und bestimmten anderen Fasern (Dimethylacetamid-Verfahren) (ISO 1833-20:2009)

In diesem Teil der ISO 1833 wird ein Dimethylacetamid Verfahren zur Bestimmung des prozentualen Anteils an Elasthan, nach dem Abtrennen der nichtfaserigen Begleitstoffe, in Textilien aus binären Mischungen bestimmter Elasthanfasern mit Baumwoll , Viskose , Cupro , Modal , Polyamid , Polyester  oder Wollfasern festgelegt.
Dieses Verfahren ist nicht anwendbar, wenn Polyacrylfasern vorhanden sind.

Textiles - Analyse chimique quantitative - Partie 20: Mélanges d'élasthanne et de certaines autres fibres (méthode à la diméthylacétamide) (ISO 1833-20:2009)

L'ISO 1833-20:2009 spécifie une méthode utilisant la diméthylacétamide pour déterminer le pourcentage d'élasthanne, après élimination des matières non fibreuses, dans des textiles réalisés à partir de mélanges binaires de certaines fibres d'élasthanne avec des fibres de coton, de viscose, de cupro, de modal, de polyamide, de polyester ou de laine.
Cette méthode n'est pas applicable en présence de fibres d'acrylique.

Tekstilije - Kvantitativna kemična analiza - 20. del: Mešanica elastanovih in nekaterih drugih vlaken (metoda z uporabo dimetilacetamida) (ISO 1833-20:2009)

Ta del standarda ISO 1833 določa metodo z uporabo dimetilacetamida za ugotavljanje odstotne vrednosti elastana po odstranitvi nevlakenske snovi v tekstilijah iz dvokomponentnih mešanic določenih elastanskih vlaken in bombažnih, viskoznih, kupro vlaken, modalnih vlaken, poliamidnih, poliestrskih ali volnenih vlaken. Ta metoda se ne uporablja, kadar so prisotna akrilna vlakna.

General Information

Status
Withdrawn
Public Enquiry End Date
19-May-2010
Publication Date
03-Jul-2013
Withdrawal Date
10-Apr-2019
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Apr-2019
Due Date
04-May-2019
Completion Date
11-Apr-2019

Relations

Buy Standard

Standard
EN ISO 1833-20:2013
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1833-20:2013
01-september-2013
7HNVWLOLMH.YDQWLWDWLYQDNHPLþQDDQDOL]DGHO0HãDQLFDHODVWDQRYLKLQ
QHNDWHULKGUXJLKYODNHQ PHWRGD]XSRUDERGLPHWLODFHWDPLGD  ,62
Textiles - Quantitative chemical analysis - Part 20: Mixtures of elastane and certain other
fibres (method using dimethylacetamide) (ISO 1833-20:2009)
Textilien - Quantitative chemische Analysen - Teil 20: Mischungen aus Elasthanfasern
und bestimmten anderen Fasern (Dimethylacetamid-Verfahren) (ISO 1833-20:2009)
Textiles - Analyse chimique quantitative - Partie 20: Mélanges d'élasthanne et de
certaines autres fibres (méthode à la diméthylacétamide) (ISO 1833-20:2009)
Ta slovenski standard je istoveten z: EN ISO 1833-20:2010
ICS:
59.060.20 Umetna vlakna Man-made fibres
SIST EN ISO 1833-20:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1833-20:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 1833-20:2013


EUROPEAN STANDARD
EN ISO 1833-20

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2010
ICS 59.060.01
English Version
Textiles - Quantitative chemical analysis - Part 20: Mixtures of
elastane and certain other fibres (method using
dimethylacetamide) (ISO 1833-20:2009)
Textiles - Analyse chimique quantitative - Partie 20: Textilien - Quantitative chemische Analysen - Teil 20:
Mélanges d'élasthanne et de certaines autres fibres Mischungen aus Elasthanfasern und bestimmten anderen
(méthode à la diméthylacétamide) (ISO 1833-20:2009) Fasern (Dimethylacetamid-Verfahren) (ISO 1833-20:2009)
This European Standard was approved by CEN on 12 September 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1833-20:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1833-20:2013
EN ISO 1833-20:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1833-20:2013
EN ISO 1833-20:2010 (E)
Foreword
The text of ISO 1833-20:2009 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 1833-20:2010 by
Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the
latest by April 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 1833-20:2009 has been approved by CEN as a EN ISO 1833-20:2010 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 1833-20:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 1833-20:2013

INTERNATIONAL ISO
STANDARD 1833-20
First edition
2009-10-15

Textiles — Quantitative chemical
analysis —
Part 20:
Mixtures of elastane and certain other
fibres (method using dimethylacetamide)
Textiles — Analyse chimique quantitative —
Partie 20: Mélanges d'élasthanne et de certaines autres fibres
(méthode à la diméthylacétamide)




Reference number
ISO 1833-20:2009(E)
©
ISO 2009

---------------------- Page: 7 ----------------------

SIST EN ISO 1833-20:2013
ISO 1833-20:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2009 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 1833-20:2013
ISO 1833-20:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. I
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.