SIST EN 301 473 V1.4.1:2013
(Main)Satellite Earth Stations and Systems (SES) - Aircraft Earth Stations (AES) operating below 3 GHz under the Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS)
Satellite Earth Stations and Systems (SES) - Aircraft Earth Stations (AES) operating below 3 GHz under the Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS)
The present document specifies certain minimum technical performance requirements of Aircraft Earth Station (AES) equipment with both transmit and receive capabilities for operation in the Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS), and/or in the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS), in the frequency bands given in table 1.
The technical requirements in the present document are in two major categories:
• emission limits: to protect other radio services and systems from harmful interference generated by the AES in normal use;
• AES Control and Monitoring Functions (CMF): to protect other radio services and systems from unwanted transmissions from the AES. The CMF in each AES is capable of answering to commands from the Network Control Facilities (NCF) for its supporting satellite network. NOTE: The requirements for Network Control Facilities (NCF) for S-PCN MES transmitting in the 1 610 MHz to 1 626,5 MHz band or the 1 980 MHz to 2 010 MHz band are contained in ETS 300 735 [4]; these requirements are also applicable to AES transmitting in those bands. An AES may be subject to additional or alternative requirements in other standards depending on its functionality, in particular if it supports a service which is considered a justified case for regulation of terminal equipment interworking via the public telecommunications network. An AES will also be subject to additional airworthiness certification requirements.
Satelitske zemeljske postaje in sistemi (SES) - Letalske zemeljske postaje (AES), ki obratujejo v letalski mobilni satelitski storitvi (AMSS) in mobilni satelitski storitvi (MSS) oziroma v letalski mobilni satelitski storitvi na poti (AMS(R)S) in mobilni satelitski storitvi (MSS), v območju pod 3 GHz
Ta dokument določa nekatere minimalne zahteve v zvezi z tehnično zmogljivostjo opreme letalske zemeljske postaje (AES) s sposobnostjo oddajanja in sprejemanja za obratovanje v letalski mobilni satelitski storitvi (AMSS) ter mobilni satelitski storitvi (MSS) in/ali v letalski mobilni satelitski storitvi na poti (AMS(R)S) in mobilni satelitski storitvi (MSS) v frekvenčnih pasovih, navedenih v preglednici 1.
Tehnične zahteve v tem dokumentu so razvrščene v dve večji kategoriji:
• omejitve emisij: za zaščito drugih radijskih storitev in sistemov pred škodljivimi motnjami, ki jih povzroča letalska zemeljska postaja pri običajni uporabi;
• funkcije letalske zemeljske postaje za krmiljenje in spremljanje (CMF): za zaščito drugih radijskih storitev in sistemov pred neželenim oddajanjem letalske zemeljske postaje. Funkcije za krmiljenje in spremljanje v vsaki letalski zemeljski postaji se lahko odzivajo na ukaze iz naprave za krmiljenje omrežja (NCF) za njihovo podporno satelitsko omrežje. OPOMBA: Zahteve za naprave za krmiljenje omrežja (NCF) za S-PCN MES, ki oddaja v pasu 1610 MHz do 1626,5 MHz ali v pasu 1980 MHz do 2010 MHz so v standardu ETS 300 735 [4]; te zahteve se uporabljajo tudi za letalske zemeljske postaje, ki oddajajo v navedenih pasovih. Letalska zemeljska postaja je lahko predmet dodatnih ali drugačnih zahtev iz drugih standardov, kar je odvisno od njene funkcionalnosti, zlasti če podpira storitev, ki se šteje kot upravičen primer za ureditev terminalske opreme, ki medsebojno deluje prek javnega telekomunikacijskega omrežja. Letalska zemeljska postaja bo prav tako predmet dodatnih zahtev za potrjevanje plovnosti.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Satellite Earth Stations and Systems (SES) - Aircraft Earth Stations (AES) operating below 3 GHz under the Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS)33.060.30Radiorelejni in fiksni satelitski komunikacijski sistemiRadio relay and fixed satellite communications systemsICS:Ta slovenski standard je istoveten z:EN 301 473 Version1.4.0SIST EN 301 473 V1.4.1:2013en01-maj-2013SIST EN 301 473 V1.4.1:2013SLOVENSKI
STANDARD
SIST EN 301 473 V1.4.1:2013
ETSI EN 301 473 V1.4.1 (2013-03) Satellite Earth Stations and Systems (SES); Aircraft Earth Stations (AES) operating below 3 GHz under the Aeronautical Mobile Satellite Service (AMSS)/ Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/ Mobile Satellite Service (MSS)
European Standard SIST EN 301 473 V1.4.1:2013
ETSI ETSI EN 301 473 V1.4.1 (2013-03) 2
Reference REN/SES-00325 Keywords aeronautical, AMSS, earth station, mobile, MSS, satellite ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2013. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 473 V1.4.1:2013
ETSI ETSI EN 301 473 V1.4.1 (2013-03) 3 Contents Intellectual Property Rights . 8 Foreword . 8 Introduction . 8 1 Scope . 9 2 References . 9 2.1 Normative references . 9 2.2 Informative references . 10 3 Definitions and abbreviations . 10 3.1 Definitions . 10 3.2 Abbreviations . 11 4 General . 12 4.1 Presentation of equipment for testing purposes . 12 4.2 Aircraft earth stations . 12 4.3 Description of equipment . 13 5 Requirements for AES transmitting in the band 1 610 MHz to 1 626,5 MHz . 14 5.1 Unwanted emissions limits outside the band 1 610 MHz to 1 626,5 MHz and the band 1 626,5 MHz to 1 628,5 MHz (carrier-on) . 14 5.1.1 Purpose . 14 5.1.2 Conformance requirements . 14 5.1.3 Method of test . 14 5.1.4 Peak measurement . 15 5.1.5 Average measurement . 15 5.1.6 Test requirements . 16 5.2 Unwanted emissions limits within the band 1 610 MHz to 1 626,5 MHz and the band 1 626,5 MHz to 1 628,5 MHz (carrier-on) . 16 5.2.1 Purpose . 16 5.2.2 Conformance requirements . 16 5.2.3 Method of test . 17 5.2.4 Measurement method . 18 5.2.5 Test requirements . 18 5.3 EIRP density limits within the operational band . 18 5.3.1 Purpose . 18 5.3.2 Conformance requirements . 18 5.3.3 Method of test . 19 5.3.4 Peak Limit Test . 19 5.3.5 Mean Limit Test . 19 5.3.6 Test requirements . 20 5.4 Unwanted emissions limits (carrier-off) . 20 5.4.1 Purpose . 20 5.4.2 Conformance requirements . 20 5.4.3 Method of test . 20 5.4.4 Peak measurement . 21 5.4.5 Average measurement . 21 5.4.6 Test requirements . 21 5.5 AES Control and Monitoring Functions (CMF) . 21 5.5.1 Special test equipment . 21 5.5.2 Self-monitoring functions . 22 5.5.2.1 Processor monitoring . 22 5.5.2.1.1 Purpose . 22 5.5.2.1.2 Conformance requirements . 22 5.5.2.1.3 Method of test . 22 5.5.2.2 Transmit frequency generation sub-system monitoring . 22 5.5.2.2.1 Purpose . 22 SIST EN 301 473 V1.4.1:2013
ETSI ETSI EN 301 473 V1.4.1 (2013-03) 4 5.5.2.2.2 Conformance requirements . 22 5.5.2.2.3 Method of test . 22 5.5.3 Network control authorization and reception . 22 5.5.3.1 Network control authorization . 22 5.5.3.1.1 Purpose . 22 5.5.3.1.2 Conformance requirements . 23 5.5.3.1.3 Method of test . 23 5.5.3.1.4 Test procedure . 23 5.5.3.1.5 Test requirement . 23 5.5.3.2 Network control reception transmit frequency control. 23 5.5.3.2.1 Purpose . 23 5.5.3.2.2 Conformance requirements . 24 5.5.3.2.3 Method of test . 24 5.5.3.2.4 Test procedure . 24 5.5.3.2.5 Test requirement . 24 5.6 Equipment identity . 24 5.6.1 Purpose . 24 5.6.2 Conformance requirements . 24 5.6.3 Method of test . 25 5.6.4 Test procedure . 25 5.6.5 Test requirements . 25 6 Requirements for AES transmitting in the band 1 626,5 MHz to 1 660,5 MHz and the band 1 668,0 MHz to 1 675,0 MHz . 25 6.1 Unwanted emissions limits outside the band 1 626,5 MHz to 1 660,5 MHz and the band 1 660,5 MHz to 1 662,5 MHz and also outside the band 1 666,0 MHz to 1 668,0 MHz, the band 1 668,0 MHz to 1 675,0 MHz and the band 1 675,0 MHz to 1 677,0 MHz . 25 6.1.1 Purpose . 25 6.1.2 Conformance requirements . 26 6.1.3 Testing for carrier on state . 32 6.1.3.1 Method of test . 32 6.1.3.2 Measurement method . 33 6.1.3.3 Test requirements . 33 6.1.4 Testing for carrier off state . 33 6.1.4.1 Method of test . 33 6.1.4.2 Peak measurement method . 34 6.1.4.3 Average measurement . 34 6.1.4.4 Test requirements . 34 6.2 Unwanted emissions limits within the band 1 626,5 MHz to 1 660,5 MHz and the band 1 660,5 MHz to 1 662,5 MHz and also within the band 1 666,0 MHz to 1 668,0 MHz, the band 1 668,0 MHz to 1 675,0 MHz and the band 1 675,0 MHz to 1 677,0 MHz . 35 6.2.1 Purpose . 35 6.2.2 Conformance requirements . 35 6.2.2.1 General . 35 6.2.2.2 Specification 1: Carrier-on state . 35 6.2.2.3 Specification 2: Carrier-off state . 38 6.2.3 Testing for carrier on state . 38 6.2.3.1 Method of test . 38 6.2.3.2 Measurement method . 39 6.2.3.3 Test requirements . 39 6.2.4 Testing for carrier off state . 39 6.2.4.1 Method of test . 39 6.2.4.2 Peak measurement method . 40 6.2.4.3 Average measurement . 40 6.2.4.4 Test requirements . 40 6.3 AES Control and Monitoring Functions (CMF) . 40 6.3.1 Special test equipment . 40 6.3.2 Self-monitoring functions . 41 6.3.2.1 Processor monitoring . 41 6.3.2.1.1 Purpose . 41 6.3.2.1.2 Conformance requirements . 41 6.3.2.1.3 Method of test . 41 SIST EN 301 473 V1.4.1:2013
ETSI ETSI EN 301 473 V1.4.1 (2013-03) 5 6.3.2.2 Transmit frequency generation sub-system monitoring . 41 6.3.2.2.1 Purpose . 41 6.3.2.2.2 Conformance requirements . 41 6.3.2.2.3 Method of test . 41 6.3.3 Network control authorization and reception . 41 6.3.3.1 Network control authorization . 41 6.3.3.1.1 Purpose . 41 6.3.3.1.2 Conformance requirements . 42 6.3.3.1.3 Method of test . 42 6.3.3.1.4 Test procedure . 42 6.3.3.1.5 Test requirement . 42 6.3.3.2 Network control reception transmit frequency control. 42 6.3.3.2.1 Purpose . 42 6.3.3.2.2 Conformance requirements . 43 6.3.3.2.3 Method of test . 43 6.3.3.2.4 Test procedure . 43 6.3.3.2.5 Test requirement . 43 6.4 Equipment identity . 43 6.4.1 Purpose . 43 6.4.2 Conformance requirements . 43 6.4.3 Method of test . 44 6.4.4 Test procedure . 44 6.4.5 Test requirements . 44 7 Requirements for NGSO AES transmitting in the band 1 980 MHz to 2 010 MHz . 44 7.1 Unwanted emissions limits outside the band 1 980,1 MHz to 2 009,9 MHz (carrier-on) . 44 7.1.1 Purpose . 44 7.1.2 Conformance requirements . 44 7.1.3 Method of test . 45 7.1.4 Peak measurement . 46 7.1.5 Average measurement . 46 7.1.6 Test requirements . 46 7.2 Unwanted emissions limits within the bands 1 980,1 MHz to 2 009,9 MHz, 1 978,1 MHz to 1 980,1 MHz and 2 009,9 MHz to 2 011,9 MHz (carrier-on). 46 7.2.1 Purpose . 46 7.2.2 Conformance requirements . 47 7.2.3 Method of test . 47 7.2.4 Measurement method . 48 7.2.5 Test requirements . 48 7.3 Unwanted emissions limits (carrier-off) . 48 7.3.1 Purpose . 48 7.3.2 Conformance requirements . 48 7.3.3 Method of test . 49 7.3.4 Peak measurement . 49 7.3.5 Average measurement . 49 7.3.6 Test requirements . 50 7.4 AES Control and Monitoring Functions (CMF) . 50 7.4.1 Special test equipment . 50 7.4.2 Self-monitoring functions . 50 7.4.2.1 Processor monitoring . 50 7.4.2.1.1 Purpose . 50 7.4.2.1.2 Conformance requirements . 50 7.4.2.1.3 Method of test . 50 7.4.2.2 Transmit frequency generation sub-system monitoring . 50 7.4.2.2.1 Purpose . 50 7.4.2.2.2 Conformance requirements . 51 7.4.2.2.3 Method of test . 51 7.4.3 Network control authorization and reception . 51 7.4.3.1 Network control authorization . 51 7.4.3.1.1 Purpose . 51 7.4.3.1.2 Conformance requirements .
...
Final draft ETSI EN 301 473 V1.4.1 (2012-12)
European Standard
Satellite Earth Stations and Systems (SES);
Aircraft Earth Stations (AES) operating below 3 GHz under the
Aeronautical Mobile Satellite Service (AMSS)/
Mobile Satellite Service (MSS) and/or the
Aeronautical Mobile Satellite on Route Service (AMS(R)S)/
Mobile Satellite Service (MSS)
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 301 473 V1.4.1 (2012-12)
Reference
REN/SES-00325
Keywords
aeronautical, AMSS, earth station, mobile, MSS,
satellite
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2012.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 301 473 V1.4.1 (2012-12)
Contents
Intellectual Property Rights . 8
Foreword . 8
Introduction . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 10
3 Definitions and abbreviations . 10
3.1 Definitions . 10
3.2 Abbreviations . 11
4 General . 12
4.1 Presentation of equipment for testing purposes . 12
4.2 Aircraft earth stations . 12
4.3 Description of equipment . 13
5 Requirements for AES transmitting in the band 1 610 MHz to 1 626,5 MHz . 14
5.1 Unwanted emissions limits outside the band 1 610 MHz to 1 626,5 MHz and the band 1 626,5 MHz to
1 628,5 MHz (carrier-on) . 14
5.1.1 Purpose . 14
5.1.2 Conformance requirements . 14
5.1.3 Method of test . 14
5.1.4 Peak measurement . 15
5.1.5 Average measurement . 15
5.1.6 Test requirements . 16
5.2 Unwanted emissions limits within the band 1 610 MHz to 1 626,5 MHz and the band 1 626,5 MHz to
1 628,5 MHz (carrier-on) . 16
5.2.1 Purpose . 16
5.2.2 Conformance requirements . 16
5.2.3 Method of test . 17
5.2.4 Measurement method . 18
5.2.5 Test requirements . 18
5.3 EIRP density limits within the operational band . 18
5.3.1 Purpose . 18
5.3.2 Conformance requirements . 18
5.3.3 Method of test . 19
5.3.4 Peak Limit Test . 19
5.3.5 Mean Limit Test . 19
5.3.6 Test requirements . 20
5.4 Unwanted emissions limits (carrier-off) . 20
5.4.1 Purpose . 20
5.4.2 Conformance requirements . 20
5.4.3 Method of test . 20
5.4.4 Peak measurement . 21
5.4.5 Average measurement . 21
5.4.6 Test requirements . 21
5.5 AES Control and Monitoring Functions (CMF) . 21
5.5.1 Special test equipment . 21
5.5.2 Self-monitoring functions . 22
5.5.2.1 Processor monitoring . 22
5.5.2.1.1 Purpose . 22
5.5.2.1.2 Conformance requirements . 22
5.5.2.1.3 Method of test . 22
5.5.2.2 Transmit frequency generation sub-system monitoring . 22
5.5.2.2.1 Purpose . 22
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 301 473 V1.4.1 (2012-12)
5.5.2.2.2 Conformance requirements . 22
5.5.2.2.3 Method of test . 22
5.5.3 Network control authorization and reception . 22
5.5.3.1 Network control authorization . 22
5.5.3.1.1 Purpose . 22
5.5.3.1.2 Conformance requirements . 23
5.5.3.1.3 Method of test . 23
5.5.3.1.4 Test procedure . 23
5.5.3.1.5 Test requirement . 23
5.5.3.2 Network control reception transmit frequency control. 23
5.5.3.2.1 Purpose . 23
5.5.3.2.2 Conformance requirements . 24
5.5.3.2.3 Method of test . 24
5.5.3.2.4 Test procedure . 24
5.5.3.2.5 Test requirement . 24
5.6 Equipment identity . 24
5.6.1 Purpose . 24
5.6.2 Conformance requirements . 24
5.6.3 Method of test . 25
5.6.4 Test procedure . 25
5.6.5 Test requirements . 25
6 Requirements for AES transmitting in the band 1 626,5 MHz to 1 660,5 MHz and the band
1 668,0 MHz to 1 675,0 MHz . 25
6.1 Unwanted emissions limits outside the band 1 626,5 MHz to 1 660,5 MHz and the band 1 660,5 MHz to
1 662,5 MHz and also outside the band 1 666,0 MHz to 1 668,0 MHz, the band 1 668,0 MHz to 1 675,0
MHz and the band 1 675,0 MHz to 1 677,0 MHz . 25
6.1.1 Purpose . 25
6.1.2 Conformance requirements . 26
6.1.3 Testing for carrier on state . 32
6.1.3.1 Method of test . 32
6.1.3.2 Measurement method . 33
6.1.3.3 Test requirements . 33
6.1.4 Testing for carrier off state . 33
6.1.4.1 Method of test . 33
6.1.4.2 Peak measurement method . 34
6.1.4.3 Average measurement . 34
6.1.4.4 Test requirements . 34
6.2 Unwanted emissions limits within the band 1 626,5 MHz to 1 660,5 MHz and the band 1 660,5 MHz to
1 662,5 MHz and also within the band 1 666,0 MHz to 1 668,0 MHz, the band 1 668,0 MHz to 1 675,0
MHz and the band 1 675,0 MHz to 1 677,0 MHz . 35
6.2.1 Purpose . 35
6.2.2 Conformance requirements . 35
6.2.2.1 General . 35
6.2.2.2 Specification 1: Carrier-on state . 35
6.2.2.3 Specification 2: Carrier-off state . 38
6.2.3 Testing for carrier on state . 38
6.2.3.1 Method of test . 38
6.2.3.2 Measurement method . 39
6.2.3.3 Test requirements . 39
6.2.4 Testing for carrier off state . 39
6.2.4.1 Method of test . 39
6.2.4.2 Peak measurement method . 40
6.2.4.3 Average measurement . 40
6.2.4.4 Test requirements . 40
6.3 AES Control and Monitoring Functions (CMF) . 40
6.3.1 Special test equipment . 40
6.3.2 Self-monitoring functions . 41
6.3.2.1 Processor monitoring . 41
6.3.2.1.1 Purpose . 41
6.3.2.1.2 Conformance requirements . 41
6.3.2.1.3 Method of test . 41
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 301 473 V1.4.1 (2012-12)
6.3.2.2 Transmit frequency generation sub-system monitoring . 41
6.3.2.2.1 Purpose . 41
6.3.2.2.2 Conformance requirements . 41
6.3.2.2.3 Method of test . 41
6.3.3 Network control authorization and reception . 41
6.3.3.1 Network control authorization . 41
6.3.3.1.1 Purpose . 41
6.3.3.1.2 Conformance requirements . 42
6.3.3.1.3 Method of test . 42
6.3.3.1.4 Test procedure . 42
6.3.3.1.5 Test requirement . 42
6.3.3.2 Network control reception transmit frequency control. 42
6.3.3.2.1 Purpose . 42
6.3.3.2.2 Conformance requirements . 43
6.3.3.2.3 Method of test . 43
6.3.3.2.4 Test procedure . 43
6.3.3.2.5 Test requirement . 43
6.4 Equipment identity . 43
6.4.1 Purpose . 43
6.4.2 Conformance requirements . 43
6.4.3 Method of test . 44
6.4.4 Test procedure . 44
6.4.5 Test requirements . 44
7 Requirements for NGSO AES transmitting in the band 1 980 MHz to 2 010 MHz . 44
7.1 Unwanted emissions limits outside the band 1 980,1 MHz to 2 009,9 MHz (carrier-on) . 44
7.1.1 Purpose . 44
7.1.2 Conformance requirements . 44
7.1.3 Method of test . 45
7.1.4 Peak measurement . 46
7.1.5 Average measurement . 46
7.1.6 Test requirements . 46
7.2 Unwanted emissions limits within the bands 1 980,1 MHz to 2 009,9 MHz, 1 978,1 MHz to
1 980,1 MHz and 2 009,9 MHz to 2 011,9 MHz (carrier-on). 46
7.2.1 Purpose . 46
7.2.2 Conformance requirements . 47
7.2.3 Method of test . 47
7.2.4 Measurement method . 48
7.2.5 Test requirements . 48
7.3 Unwanted emissions limits (carrier-off) . 48
7.3.1 Purpose . 48
7.3.2 Conformance requirements . 48
7.3.3 Method of test . 49
7.3.4 Peak measurement . 49
7.3.5 Average measurement . 49
7.3.6 Test requirements . 50
7.4 AES Control and Monitoring Functions (CMF) . 50
7.4.1 Special test equipment . 50
7.4.2 Self-monitoring functions . 50
7.4.2.1 Processor monitoring . 50
7.4.2.1.1 Purpose . 50
7.4.2.1.2 Conformance requirements . 50
7.4.2.1.3 Method of test . 50
7.4.2.2 Transmit frequency generation sub-system monitoring . 50
7.4.2.2.1 Purpose . 50
7.4.2.2.2 Conformance requirements . 51
7.4.2.2.3 Method of test . 51
7.4.3 Network control authorization and reception . 51
7.4.3.1 Network control authorization . 51
7.4.3.1.1 Purpose . 51
7.4.3.1.2 Conformance requirements . 51
7.4.3.1.3 Method of test . 51
ETSI
---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 3
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.