SIST EN 61010-031:2015/A1:2022

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and measurement (IEC 61010-031:2015/A1:2018)

NEXT ACTION: TB ACTION BY 2021-09-14: common mods, currently at ENQ
2019-10-03 JF: NWI for A11 (PR=70187) was approved by the BTthrough decision D163/098. The work on the amendment is under way
2019-03-11 TC is addressing the negative assessment and is invited to provide the information whether the changes will be needed in the main body of the amendment or only in Annex ZZ.
Negative assessment. IEC standard is published.

Siicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 031: Sicherheitsbestimmungen für handgehaltenes Messzubehör zum Messen und Prüfen (IEC 61010-031:2015/A1:2018)

Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 031: Exigences de sécurité pour sondes équipées portatives et manipulées à la main pour mesurage et essais électriques (IEC 61010-031:2015/A1:2018)

Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko uporabo - 031. del: Varnostne zahteve za ročne sonde za električne meritve in preskušanje - Dopolnilo A1 (IEC 61010-031:2015/A1:2018)

General Information

• Status: Published
• Public Enquiry End Date: 30-Jul-2017
• Publication Date: 01-Feb-2022
• ICS: 19.080 - Electrical and electronic testing
• ICS: 71.040.10 - Chemical laboratories. Laboratory equipment
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 26-Nov-2021
• Due Date: 31-Jan-2022
• Completion Date: 02-Feb-2022
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Ref Project: EN 61010-031:2015/A1:2021 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and measurement

Relations

• Amends: SIST EN 61010-031:2015 - Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC 61010-031:2015)
• Effective Date: 11-Apr-2017
• Amended By: SIST EN 61010-031:2015/A11:2022 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
• Effective Date: 30-Jul-2019
• Revised: SIST EN IEC 61010-031:2023 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC 61010-031:2022)
• Effective Date: 10-Aug-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61010-031:2015/A1:2022
01-marec-2022
Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko
uporabo - 031. del: Varnostne zahteve za ročne sonde za električne meritve in
preskušanje - Dopolnilo A1 (IEC 61010-031:2015/A1:2018)
Safety requirements for electrical equipment for measurement, control and laboratory
use - Part 031: Safety requirements for hand-held and hand-manipulated probe
assemblies for electrical test and measurement (IEC 61010-031:2015/A1:2018)
Siicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil
031: Sicherheitsbestimmungen für handgehaltenes Messzubehör zum Messen und
Prüfen (IEC 61010-031:2015/A1:2018)
Exigences de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire - Partie 031: Exigences de sécurité pour sondes équipées portatives et
manipulées à la main pour mesurage et essais électriques (IEC 61010-
031:2015/A1:2018)
Ta slovenski standard je istoveten z: EN 61010-031:2015/A1:2021
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
SIST EN 61010-031:2015/A1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 61010-031:2015/A1:2022

---------------------- Page: 2 ----------------------
SIST EN 61010-031:2015/A1:2022


EUROPEAN STANDARD EN 61010-031:2015/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2021
ICS 19.080

English Version
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 031: Safety requirements for
hand-held and hand-manipulated probe assemblies for electrical
test and measurement
(IEC 61010-031:2015/A1:2018)
Exigences de sécurité pour appareils électriques de Sicherheitsbestimmungen für elektrische Mess-, Steuer-,
mesurage, de régulation et de laboratoire - Partie 031: Regel- und Laborgeräte - Teil 031:
Exigences de sécurité pour sondes équipées portatives et Sicherheitsbestimmungen für handgehaltenes
manipulées à la main pour mesurage et essais électriques Messzubehör zum Messen und Prüfen
(IEC 61010-031:2015/A1:2018) (IEC 61010-031:2015/A1:2018)
This amendment A1 modifies the European Standard EN 61010-031:2015; it was approved by CENELEC on 2018-07-03. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61010-031:2015/A1:2021 E

---------------------- Page: 3 ----------------------
SIST EN 61010-031:2015/A1:2022
EN 61010-031:2015/A1:2021 (E)
European foreword
The text of document 66/664/FDIS, future IEC 61010-031/A1, prepared by IEC/TC 66 "Safety of
measuring, control and laboratory equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 61010-031:2015/A1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-05-12
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-11-12
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Fr
...

SLOVENSKI STANDARD
SIST EN 61010-031:2015/oprA1:2017
01-julij-2017
9DUQRVWQH]DKWHYH]DHOHNWULþQRRSUHPR]DPHULWYHQDG]RURYDQMHLQODERUDWRULMVNR
XSRUDERGHO9DUQRVWQH]DKWHYH]DURþQHVRQGH]DHOHNWULþQHPHULWYHLQ
SUHVNXãDQMH
Safety requirements for electrical equipment for measurement, control and laboratory
use - Part 031: Safety requirements for hand-held and hand-manipulated probe
assemblies for electrical test and measurement
Ta slovenski standard je istoveten z: EN 61010-031:2015/prA1:2017
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
SIST EN 61010-031:2015/oprA1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61010-031:2015/oprA1:2017

---------------------- Page: 2 ----------------------

SIST EN 61010-031:2015/oprA1:2017

66/632/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61010-031/AMD1 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2017-05-19 2017-08-11
SUPERSEDES DOCUMENTS:


IEC TC 66 : SAFETY OF MEASURING, CONTROL AND LABORATORY EQUIPMENT
SECRETARIAT: SECRETARY:
United Kingdom Mr David Hyde
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

GROUP SAFETY FUNCTION
TC 78,TC 85
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING


This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Safety requirements for electrical equipment for measurement, control and laboratory use – Part
031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical
test and measurement.

NOTE FROM TC/SC OFFICERS:




Copyright © 2017 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing
National Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part
of it, for any other purpose without permission in writing from IEC.

---------------------- Page: 3 ----------------------

SIST EN 61010-031:2015/oprA1:2017
61010-031/Ed2/A1/CDV © IEC (E) 2 66/632/CDV

1 FOREWORD
2 This amendment has been prepared by IEC technical committee 66: Safety of measuring,
3 control and laboratory equipment.
4 The text of this standard is based on the following documents:
FDIS Report on voting
66/XX/FDIS 66/XX/RVD
5
6 Full information on the voting for the approval of this standard can be found in the report on
7 voting indicated in the above table.
8 The committee has decided that the contents of this publication will remain unchanged until
9 the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
10 related to the specific publication. At this date, the publication will be
11  reconfirmed,
12  withdrawn,
13  replaced by a revised edition, or
14  amended.
15
16 The National Committees are requested to note that for this publication the stability date
17 is 2021.
18 THIS TEXT IS INCLUDED FOR THE INFORMATION OF THE NATIONAL COMMITTEES AND WILL BE DELETED
19 AT THE PUBLICATION STAGE.
20
21 Change the sub-title to read:
22
23 Part 031: Safety requirements for hand-held and hand-manipulated probe
24 assemblies for electrical test and measurement
25
26 1 Scope and object
27 1.1.1 Probe assemblies included in Scope
28 Figure 4, Key 3
29 Deletion
30 Delete the words “or clamp”
31 2 Normative references
32 3 Terms and definitions
33 3.1.1
34 TERMINAL
35 Note 1 to entry
36 Deletion
37 Delete the word “connectors”
38 3.1.5
39 CONNECTOR

---------------------- Page: 4 ----------------------

SIST EN 61010-031:2015/oprA1:2017
61010-031/Ed2/A1/CDV © IEC (E) 3 66/632/CDV

40 Deletion
41 Delete the word “connector” so the sentence will read:
42 “…to connect to a TERMINAL of the equipment or to another probe assembly”
43 3.4.11
44 MEASUREMENT CATEGORY
45 Replacement
46 Replace the text with the following:
47 classification of testing and measuring circuits according to the types of mains to which they
48 are intended to be connected
49 4 Tests
50 4.3.9 Duty cycle
51 Replacement
52 Replace the title with the following:
53 4.3.9 Short-term or intermittent operation
54 4.4.4.2 Temperature
55 Replacement
56 Replace the second paragraph with t
...