SIST ISO 885:2000

General purpose bolts and screws -- Metric series -- Radii under the head

Boulons et vis d'application générale -- Série métrique -- Rayon d'arrondi sous tête

Vijaki za splošno uporabo - Metrski - Polmeri zaokrožitve pod glavo

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-1996
• Withdrawal Date: 15-Jul-2009
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: I12 - Imaginarni 12 Imaginarni TC za ISO področje - vzdrževani privzeti ISO standardi
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 15-Jul-2009
• Due Date: 07-Aug-2009
• Completion Date: 16-Jul-2009
• Ref Project: ISO 885:1976 - General purpose bolts and screws — Metric series — Radii under the head

Standards Content (Sample)

i-‘\
INTERNATIONAL STANDARD LLL 885
\
4
*i#e
General purpose bolts and screws - Metric series - Radii
under the head
Bou/ons et vis d’application g&h-ale - Skrie me’trique - Rayon d’arrondi sous t&e
First edition - 1976-05-01
Ref. No. IS0 885-1976 (E)
iz UDC 621.882.14
-
Descriptors : fasteners, bolts, screws, radius under head, dimensions.
0
ti
Price based on 1 page

---------------------- Page: 1 ----------------------
FOREWORD
IS0 (the international-Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
Prior to 1972, the results of the work of the Technical Committees were published
as IS0 Recommendations; these documents are now in the process of being
transformed into International Standards. As part of this process, Technical
Committee ISO/TC 2 has reviewed IS0 Recommendation R 885 and found it
technically suitable for transformation. International Standard IS0 885 therefore
replaces IS0 Recommendation R 8854968 to which it is technically identical.
IS0 Recommendation R 885 was approved by the Member Bodies of the following
countries :
Austria India Romania
Belgium I ran South Africa, Rep. of
Canada Ireland Spain
Chile Israel Sweden
Czechoslovakia Italy Switzerland
Denmark Japan Thailand
Finland Korea, Rep. of Turkey
Egypt, Arab Rep. of Netherlands United Kingdom
France New Zealand U.S.A.
Germany Norway U.S.S.R.
Greece Poland Yugoslavia
Hungary Po
...

SLOVENSKI STANDARD
SIST ISO 885:
01-DSULO-
Vijaki za splošno uporabo - Metrski - Polmeri zaokrožitve pod glavo
General purpose bolts and screws -- Metric series -- Radii under the head
Boulons et vis d'application générale -- Série métrique -- Rayon d'arrondi sous tête
Ta slovenski standard je istoveten z: ISO 885:1976
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST ISO 885: en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 885:1996

---------------------- Page: 2 ----------------------

SIST ISO 885:1996
i-‘\
INTERNATIONAL STANDARD LLL 885
\
4
*i#e
General purpose bolts and screws - Metric series - Radii
under the head
Bou/ons et vis d’application g&h-ale - Skrie me’trique - Rayon d’arrondi sous t&e
First edition - 1976-05-01
Ref. No. IS0 885-1976 (E)
iz UDC 621.882.14
-
Descriptors : fasteners, bolts, screws, radius under head, dimensions.
0
ti
Price based on 1 page

---------------------- Page: 3 ----------------------

SIST ISO 885:1996
FOREWORD
IS0 (the international-Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
Prior to 1972, the results of the work of the Technical Committees were published
as IS0 Recommendations; these documents are now in the process of being
transformed into International Standards. As part of this process, Technical
Committee ISO/TC 2 has reviewed IS0 Recommendation R 885 and found it
technically suitable for transformation. International Standard IS0 885 therefore
replaces IS0 Recommendation R 8854968 to which it is technically identical.
IS0 Recommendation R 885 was a
...

SLOVENSKI STANDARD
SIST ISO 885:2000
01-januar-2000
Vijaki za splošno uporabo - Metrski - Polmeri zaokrožitve pod glavo
General purpose bolts and screws -- Metric series -- Radii under the head
Boulons et vis d'application générale -- Série métrique -- Rayon d'arrondi sous tête
Ta slovenski standard je istoveten z: ISO 885:1976
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST ISO 885:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 885:2000

---------------------- Page: 2 ----------------------

SIST ISO 885:2000
i-‘\
INTERNATIONAL STANDARD LLL 885
\
4
*i#e
General purpose bolts and screws - Metric series - Radii
under the head
Bou/ons et vis d’application g&h-ale - Skrie me’trique - Rayon d’arrondi sous t&e
First edition - 1976-05-01
Ref. No. IS0 885-1976 (E)
iz UDC 621.882.14
-
Descriptors : fasteners, bolts, screws, radius under head, dimensions.
0
ti
Price based on 1 page

---------------------- Page: 3 ----------------------

SIST ISO 885:2000
FOREWORD
IS0 (the international-Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
Prior to 1972, the results of the work of the Technical Committees were published
as IS0 Recommendations; these documents are now in the process of being
transformed into International Standards. As part of this process, Technical
Committee ISO/TC 2 has reviewed IS0 Recommendation R 885 and found it
technically suitable for transformation. International Standard IS0 885 therefore
replaces IS0 Recommendation R 8854968 to which it is technically identical.
IS0 Recommendation R 885 was a
...

NORME INTERNATIONALE 885
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .ULXJ\ H4POLIH %A OPrAHM34IIIIA no CTAH3APTl134UUU .ORGANISATION INTERNATIONALE DE NORMALlSATiGN
L
Boulons et vis d'application générale - Série métrique -
Rayon d'arrondi sous tête
General purpose bolts and screws - Metric series - Radii under the head
Première édition - 1976-05-01
Réf. no : IS0 885-1976 (F)
CDU 621.882.14
Descripteun : élément de fixation, boulon, vis, arrondi sous tête, dimension.
Prix basé sur 1 page

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L'ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (Comités Membres ISO). L'élaboration des
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I'ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I'ISO.
Avant 1972, les résultats des travaux des Comités Techniques étaient publiés
comme Recommandations ISO; maintenant, ces documents sont en cours de
transformation en Normes Internationales. Compte tenu de cette procédure, le
Comité Technique lSO/TC 2 a examiné la Recommandation ISO/R 885 et est
d'avis qu'elle peut, du point de vue technique, être transformée en Norme
Internationale. La présente Norme Internationale remplace donc la Recomman-
dation ISO/R 885-1968 à laquelle elle est techniquement identique.
La Recommandation ISO/R 885 avait été approuvée par les Comités Membres
des pays suivants :
Afrique du Sud, Rép. d' Grèce Portugal
Allemagne Hongrie Roumanie
Autriche Inde Royaume-Uni
Belgique I ran Suède
Canada Irlande Suisse
Chili Israël Tha
...