oSIST prEN IEC 62149-3:2023
(Main)Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 3: Sender mit modulatorintegrierten Laserdioden für 40 Gbit/s-Lichtwellenleiter-Übertragungssysteme
Composants et dispositifs actifs fibroniques - Normes de performances - Partie 3: Émetteurs à diodes laser à modulateur intégré pour systèmes de transmission fibroniques 40 Gbit/s
Aktivne komponente in naprave optičnih vlaken - Izvedbeni standardi - 3. del: Laserski diodni oddajniki z integriranim modulatorjem za optične prenosne sisteme 40 Gbit/s
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 62149-3:2023
01-marec-2023
Aktivne komponente in naprave optičnih vlaken - Izvedbeni standardi - 3. del:
Laserski diodni oddajniki z integriranim modulatorjem za optične prenosne
sisteme 40 Gbit/s
Fibre optic active components and devices - Performance standards - Part 3: Modulator-
integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 3: Sender mit
modulatorintegrierten Laserdioden für 40 Gbit/s-Lichtwellenleiter-Übertragungssysteme
Composants et dispositifs actifs fibroniques - Normes de performances - Partie 3:
Émetteurs à diodes laser à modulateur intégré pour systèmes de transmission
fibroniques 40 Gbit/s
Ta slovenski standard je istoveten z: prEN IEC 62149-3:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 62149-3:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 62149-3:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 62149-3:2023
86C/1839/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62149-3 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-01-06 2023-03-31
SUPERSEDES DOCUMENTS:
86C/1799/CD, 86C/1818A/CC
IEC SC 86C : FIBRE OPTIC SYSTEMS AND ACTIVE DEVICES
SECRETARIAT: SECRETARY:
United States of America Mr Fred Heismann
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated
laser diode transmitters for 40-Gbit/s fibre optic transmission systems
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You
may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permission
in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 62149-3:2023
IEC CDV 62149-3/Ed4 © IEC 2023 – 2 – 86C/1839/CDV
1 CONTENTS
2
3 FOREWORD . 3
4 INTRODUCTION . 5
5 1 Scope . 6
6 2 Normative references . 6
7 3 Terms, definitions and abbreviated terms . 7
8 3.1 Terms and definitions . 7
9 3.2 Abbreviated terms . 7
10 4 Product parameters . 7
11 4.1 Absolute limiting ratings . 7
12 4.2 Operating environment . 8
13 4.3 Functional specification. 8
14 4.4 Diagrams . 9
15 5 Testing . 10
16 5.1 General . 10
17 5.2 Characterization testing . 10
18 5.3 Performance testing . 11
19 6 Environmental specifications . 13
20 6.1 General safety . 13
21 6.2 Laser safety . 13
22 Bibliography . 14
23
24 Figure 1 – Schematic diagram of a modulator-integrated laser diode transmitter . 10
25
26 Table 1 – Absolute limiting ratings . 8
27 Table 2 – Operating environment . 8
28 Table 3 – Operating conditions for functional specification . 8
29 Table 4 – Functional specification . 9
30 Table 5 – Characterization tests . 11
31 Table 6 – Performance test plan . 12
32 Table 7 – Recommended performance test failure criteria . 13
33
34
---------------------- Page: 4 ----------------------
oSIST prEN IEC 62149-3:2023
IEC CDV 62149-3/Ed4 © IEC 2023 – 3 – 86C/1839/CDV
35 INTERNATIONAL ELECTROTECHNICAL COMMISSION
36 ____________
37
38 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
39 PERFORMANCE STANDARDS –
40
41 Part 3: Modulator-integrated laser diode transmitters
42 for 40-Gbit/s fibre optic transmission systems
43
44 FOREWORD
45 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
46 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
47 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
48 addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
49 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
50 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
51 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
52 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
53 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
54 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
55 consensus of opinion on the relevant subjects since each technical committee has representation from all
56 interested IEC National Committees.
57 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
58 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
59 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
60 misinterpretation by any end user.
61 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
62 transparently to the maximum extent possible in their national and regional publications. Any divergence between
63 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
64 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
65 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
66 services carried out by independent certification bodies.
67 6) All users should ensure that they have the latest edition of this publication.
68 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
69 members of its technical committees and IEC National Committees for any personal injury, property damage or
70 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
71 arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
72 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
73 indispensable for the correct application of this publication.
74 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
75 rights. IEC shall not be held responsible for identifying any or all such patent rights.
76
77 IEC 62149-3 has been prepared by subcommittee 86C: Fibre optic systems and active devices,
78 of IEC technical committee 86: Fibre optics. It is an International Standard.
79 This fourth edition cancels and replaces the third edition published in 2020 and Corrigendum
80 1:2021. This edition constitutes a technical revision.
81 This edition includes the following significant technical changes with respect to the previous
82 edition:
83 a) specification of pull force for fibre pull test in Table 6 according to fibre type;
84 b) change of symbol for kink free radiant power in Table 4 and Table 5;
85 c) replacement of undefined symbols in Table 7;
86 d) addition of IEC 62149-1 as a normative reference;
87 e) addition of four ITU-T Recommendations in the Bibliography.
88 The text of this International Standard is based on the following documents:
---------------------- Page: 5 ----------------------
oSIST prEN IEC 62149-3:2023
IEC CDV 62149-3/Ed4 © IEC 2023 – 4 – 86C/1839/CDV
FDIS Report on voting
86C/xxxx/FDIS 86C/xxxx/RVD
89
90 Full information on the voting for its approval can be found in the report on voting indicated in the
91 above table.
92 The language used for the development of this International Standard is English.
93 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
94 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
95 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
96 described in greater detail at www.iec.ch/standardsdev/publications.
97 A list of all parts in the IEC 62149 series, published under the general title Fibre optic active
98 components and devices – Performance standards, can be found on the IEC website.
99 The committee has decided that the contents of this document will remain unchanged until the
100 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
101 the specific document. At this date, the document will be
102 • reconfirmed,
103 • withdrawn,
104 • replaced by a revised edition, or
105 • amended.
106
107
---------------------- Page: 6 ----------------------
oSIST prEN IEC 62149-3:2023
IEC CDV 62149-3/Ed4 © IEC 2023 – 5 – 86C/1839/CDV
108 INTRODUCTION
109 Fibre optic transmitters are used to convert electrical signals into optical signals. This document
110 covers the performance standard for optical modulators monolithically integrated with laser
111 diodes for 40 Gbit/s optical telecommunication systems. This document is applicable for on-off
112 keying formats.
113
114
---------------------- Page: 7 ----------------------
oSIST prEN IEC 62149-3:2023
IEC CDV 62149-3/Ed4 © IEC 2023 – 6 – 86C/1839/CDV
115 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
116 PERFORMANCE STANDARDS –
117
118 Part 3: Modulator-integrated laser diode transmitters
119 for 40-Gbit/s fibre optic transmission systems
120
121 1 Scope
122 This part of IEC 62149 covers the performance specification for electroabsorption (EA) type
123 optical modulators monolithically integrated with laser diodes for 40 Gbit/s fibre optic
124 transmission systems. This document contains definitions for product performance
125 requirements as well as a series of tests and measurements, for which clearly defined conditions,
126 severities and pass/fail criteria are provided. The tests are intended to be run as an initial design
127 verification to prove any product's ability to satisfy this document's requirements. This document
128 is applicable for on-off keying modulation formats.
129 A product that has been shown to meet all the requirements of a performance standard can be
130 declared as compliant with the performance standard but will then be controlled by a quality
131 assurance program.
132 2 Normative references
133 The following documents are referred to in the text in such a way that some or all of their content
134 constitutes requirements of this document. For dated references, only the edition cited applies.
135 For undated references, the latest edition of the referenced document (including any
136 amendments) applies.
137 IEC 60068-2-1, Environmental testing – Part 2-1: Tests – Test A: Cold
138 IEC 60068-2-2, Environmental testing – Part 2-2: Tests – Test B: Dry heat
139 IEC 60068-2-6, Environmental testing – Part 2-6: Tests – Test Fc: Vibration (sinusoidal)
140 IEC 60068-2-14, Environmental testing – Part 2-14: Tests – Test N: Change of temperature
141 IEC 60068-2-27, Environmental testing – Part 2-27: Tests – Test Ea and guidance: Shock
142 IEC 60068-2-78, Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state
143 IEC 60749-7, Semiconductor devices – Mechanical and climatic test methods – Part 7: Internal
144 moisture content measurement and the analysis of other residual gases
145 IEC 60749-26, Semiconductor devices – Mechanical and climatic test methods – Part 26:
146 Electrostatic discharge (ESD) sensitivity testing – Human body model (HBM)
147 IEC 60825-1, Safety of laser products – Part 1: Equipment classification and requirements
148 IEC 60950-1, Information technology equipment – Safety – Part 1: General requirements
149 IEC 61300-2-4, Fibre optic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.