SIST EN IEC 61970-600-2:2022

Energy management system application program interface (EMS-API) - Part 600-2: Common Grid Model Exchange Specification (CGMES) - Exchange profiles specification

IEC 61970-600-2:2021 defines the profiles included in the Common Grid Model Exchange Standard (CGMES) that are based on IEC 61970-450-series and IEC 61968-13 profiles. This document refers to the IEC 61970-450-series and IEC 61968-13 profiles only in cases where they are identical. If the referenced profile is not yet published, this document includes the profile definition and related constraints’ definitions. In the case where a CGMES profile makes restriction on the referenced profile, the restriction is defined in this document.
The equipment boundary profile (EQBD) is the only profile that is not part of IEC 61970-450-series and IEC 61968-13 profiles. This profile is deprecated as modifications have been made to align between EQBP and the equipment profile (EQ). Although the updated EQBD is addressing the requirement that boundary also can be located inside a substation, which will be the case for many Distribution System Operators (DSOs), additional information would need to be exchanged. For instance, system integrity protection schemes, that can be shared by multiple utility would require another way of boundary handling. In this document EQBD is included in CGMES only to create better backwards compatibility with previous version of the CGMES.
The machine-readable documentation that supports model driven development of the profiles defined in this part are generated as Resource Description Framework Schema (RDFS) according to IEC 61970-501:2006 (with some extension) and IEC 61970-501:ED2 when published.

Schnittstelle der Anwendungsprotokolle von Energieverwaltungssystemen (EMS-API) – Teil 600-2: Austausch von Elektrizitätsversorgungssystemmodellen (CGMES) – Spezifikation der Austauschprofile

Interface de programmation d'application pour système de gestion d'énergie (EMS-API) – Partie 600-2: Norme pour l'échange de modèle de réseau commun (CGMES) – Spécification des profils d'échange

IEC 61970-600-2:2021 définit les profils inclus dans la Norme pour l'échange de modèle de réseau commun (CGMES) et qui reposent sur les profils de la série IEC 61970- 450 et de l'IEC 61968-13. Le présent document fait référence aux profils de la série IEC 61970-450 et de l'IEC 61968-13 uniquement lorsqu'ils sont identiques. Si le profil référencé n'est pas encore publié, le présent document inclut sa définition et les définitions des contraintes associées. Lorsqu'un profil de la CGMES impose une restriction sur le profil référencé, cette restriction est définie dans le présent document.
Le profil d'équipement frontière (EQBD) est le seul profil qui ne fait pas partie des profils de la série IEC 61970-450 et de l'IEC 61968-13. Ce profil est déconseillé, des modifications ayant été apportées pour aligner l'EQBP sur le profil d'équipement (EQ). Bien que l'EQBD mis à jour réponde à l'exigence selon laquelle la frontière peut également se trouver à l'intérieur d'un poste, ce qui est le cas pour de nombreux opérateurs de réseaux de distribution (DSO), il est nécessaire d'échanger des informations supplémentaires. Par exemple, les plans de protection de l'intégrité système, qui peuvent être partagés par plusieurs entreprises de services publics, exigent une autre manière de gérer les frontières. Dans le présent document, l'EQBD n'est inclus dans la CGMES que pour améliorer la rétrocompatibilité avec la version antérieure de la CGMES.
La documentation lisible par une machine qui vient à l'appui du développement piloté par modèle des profils définis dans la présente partie est produite sous forme de schéma RDF (RDFS) selon l'IEC 61970-501:2006 (avec des extensions) et l'IEC 61970-501:ED2 après publication.
Cette première édition annule et remplace l'IEC TS 61970-600-2 parue en 2017. Cette édition constitue une révision technique

Aplikacijski programski vmesnik za sistem upravljanja z energijo (EMS-API) - 600-2. del: Specifikacija izmenjave skupnega modela mreže (CGMS) - Specifikacija profilov izmenjave

Ta del standarda IEC 61970-600 določa profile, vključene v standardu izmenjave skupnega modela mreže (CGMES), ki temeljijo na profilih iz skupine standardov IEC 61970-450 in standarda IEC 61968-13. Ta dokument se navezuje na profile iz skupine standardov IEC 61970-450 in standarda IEC 61968-13 le v primerih, ko so enaki. Če sklicevani profil še ni objavljen, ta dokument vključuje opredelitev profila in opredelitve povezanih omejitev. Če profil iz standarda izmenjave skupnega modela mreže uvaja omejitev v zvezi s sklicevanim profilom, je ta opredeljena v tem dokumentu. Profil omejitev opreme (EQBD) je edini profil, ki ni del profilov iz skupine standardov IEC 61970-450 in standarda IEC 61968-13. Ta profil je zastarel, saj so bile izvedene prilagoditve za uskladitev profila omejitev opreme in profila opreme (EQ). Čeprav posodobljeni profil omejitev opreme obravnava zahtevo, da je mogoče omejitev postaviti tudi znotraj podpostaje, kar velja za številne upravljavce razdelilnih omrežij (DSO), bi bila potrebna izmenjava dodatnih informacij. Sheme za zaščito celovitosti sistema, ki jih lahko uporablja več javnih služb, bi na primer zahtevale drug način obravnave omejitev. V tem dokumentu je profil omejitev opreme vključen v standard izmenjave skupnega modela mreže zgolj zaradi večje povratne združljivosti s prejšnjo različico standarda izmenjave skupnega modela mreže. Strojno berljiva dokumentacija, ki podpira modelno voden razvoj profilov, opredeljenih v tem delu, je v skladu s standardoma IEC 61970-501:2006 (z nekaterimi razširitvami) in IEC 61970-501:ED2 ob objavi ustvarjena kot ogrodje za opis virov (shema RDFS).

General Information

• Status: Published
• Publication Date: 10-Feb-2022
• ICS: 29.240.30 - Control equipment for electric power systems
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: PSE - Power systems management
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 05-Oct-2021
• Due Date: 10-Dec-2021
• Completion Date: 11-Feb-2022
• Ref Project: EN IEC 61970-600-2:2021 - Energy management system application program interface (EMS-API) - Part 600-2: Common Grid Model Exchange Specification (CGMES) - Exchange profiles specification

Overview

SIST EN IEC 61970-600-2:2022 (EN IEC 61970-600-2:2021) defines the exchange profiles used by the Common Grid Model Exchange Specification (CGMES) as part of the Energy Management System Application Program Interface (EMS-API). The standard specifies which profiles are included in CGMES, how CGMES references the IEC 61970-450-series and IEC 61968-13 profiles, and how profile constraints or restrictions are defined when CGMES tightens or modifies referenced profiles. Machine-readable profile documentation for model-driven development is produced as Resource Description Framework Schema (RDFS) in accordance with IEC 61970-501.

Key topics and technical requirements

• Exchange profiles definition: Lists and specifies CGMES exchange profiles (e.g., Core Equipment, Operation, Short-circuit, Topology, State Variables, Diagram Layout, Geographical Location, Dynamics, and the Equipment Boundary profile).
• Profile alignment and constraints: Where IEC 61970-450-series or IEC 61968-13 profiles are identical, CGMES references them directly; where not published or where CGMES imposes stricter rules, the document contains full profile definitions and constraint specifications.
• Equipment boundary (EQBD): Included chiefly for backward compatibility. EQBD is deprecated in favor of aligning EQBP/EQ profiles, but retained to accommodate historical CGMES use cases (noting that boundary handling for shared schemes and DSO internal substation boundaries may require additional exchange semantics).
• Machine-readable schemas: Profiles are published as RDFS to support model-driven development and automated interoperability (per IEC 61970-501:2006 and future editions).
• Versioning and package structure: Includes version information and detailed package content (e.g., CoreEquipmentProfile package and many class-level definitions used for exchange).

Practical applications and who uses it

• Transmission and distribution system operators (TSOs / DSOs) use CGMES profiles to exchange consistent network models for planning, state estimation, real-time operation, and coordination across utilities.
• Utility software vendors and system integrators implement EMS-API and CGMES profiles to ensure interoperability between network modeling, SCADA, EMS, market systems, and GIS.
• Model-driven developers and data architects leverage the RDFS machine-readable schemas for automated code generation, validation, and consistent data transformation pipelines.
• Researchers and consultants employ CGMES profiles when simulating multi-utility scenarios or integrating third-party network models.

Related standards

• IEC 61970-600-1 (CGMES structure and rules)
• IEC 61970-450-series and IEC 61968-13 (referenced CIM profile sets)
• IEC 61970-501 (RDFS/schema generation guidance)

Keywords: CGMES, EMS-API, Common Grid Model Exchange Specification, exchange profiles, CIM, RDFS, IEC 61970-600-2, equipment boundary, DSOs, model-driven development, interoperability.

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2022
Aplikacijski programski vmesnik za sistem upravljanja z energijo (EMS-API) - 600-
2. del: Specifikacija izmenjave skupnega modela mreže (CGMS) - Specifikacija
profilov izmenjave
Energy management system application program interface (EMS-API) - Part 600-2:
Common Grid Model Exchange Specification (CGMES) - Exchange profiles specification
Ta slovenski standard je istoveten z: EN IEC 61970-600-2:2021
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61970-600-2

NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2021
ICS 33.200
English Version
Energy management system application program interface
(EMS-API) - Part 600-2: Common Grid Model Exchange
Specification (CGMES) - Exchange profiles specification
(IEC 61970-600-2:2021)
Interface de programmation d'application pour système de Schnittstelle der Anwendungsprotokolle von
gestion d'énergie (EMS-API) - Partie 600-1: Spécification Energieverwaltungssystemen (EMS-API) - Teil 600-2:
pour l'échange de modèle de réseau commun (CGMES) - Austausch von Elektrizitätsversorgungssystemmodellen
Spécification de profils d'échange (CGMES) - Spezifikation der Austauschprofile
(IEC 61970-600-2:2021) (IEC 61970-600-2:2021)
This European Standard was approved by CENELEC on 2021-07-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61970-600-2:2021 E

European foreword
The text of document 57/2361/FDIS, future edition 1 of IEC 61970-600-2, prepared by IEC/TC 57
“Power systems management and associated information exchange” was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 61970-600-2:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–04–09
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–07–09
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61970-600-2:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61970-501:2006 NOTE Harmonized as EN 61970-501:2006 (not modified)
IEC 61970-552:2016 NOTE Harmonized as EN 61970-552:2016 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61968-11 - Application integration at electric utilities - EN 61968-11 -
System interfaces for distribution
management - Part 11: Common
information model (CIM) extensions for
distribution
IEC 61968-13 - Application integration at electric utilities - EN IEC 61968-13 -
System interfaces for distribution
management - Part 13: Common
distribution power system model profiles
IEC 61970-301 2020 Energy management system application EN IEC 61970-301 2020
program interface (EMS-API) - Part 301:
Common information model (CIM) base
IEC 61970-302 2018 Energy management system application EN IEC 61970-302 2018
program interface (EMS-API) - Part 302:
Common information model (CIM)
dynamics
IEC 61970-452 2017 Energy management system application EN 61970-452 2017
program interface (EMS-API) - Part 452:
CIM static transmission network model
profiles
IEC 61970-453 2014 Energy management system application EN 61970-453 2014
program interface (EMS-API) - Part 453:
Diagram layout profile
IEC 61970-456 2018 Energy management system application EN IEC 61970-456 2018
program interface (EMS-API) - Part 456:
Solved power system state profiles
IEC 61970-600–1 2021 Energy management system application -EN IEC 61970-2021
program interface (EMS-API) - Part 600–1: 600–1
Common Grid Model Exchange Standard
(CGMES) - Structure and rules
IEC 61970-600-2 ®
Edition 1.0 2021-06
INTERNATIONAL
STANDARD
colour
inside
Energy management system application program interface (EMS-API) –
Part 600-2: Common Grid Model Exchange Standard (CGMES) – Exchange
profiles specification
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.200 ISBN 978-2-8322-9732-2
– 2 – IEC 61970-600-2:2021 © IEC 2021
CONTENTS
FOREWORD . 51
1 Scope . 53
2 Normative references . 53
3 Terms, definitions and abbreviated terms . 54
3.1 Terms and definitions . 54
3.2 Abbreviated terms . 55
4 Relation with other CIM standards . 56
4.1 Deprecation . 57
5 Version information for the CGMES profiles . 57
5.1 Core equipment profile . 57
5.2 Operation profile . 58
5.3 Short-circuit profile . 58
5.4 Steady state hypothesis profile . 58
5.5 Topology profile . 59
5.6 State variables profile . 59
5.7 Diagram layout profile . 59
5.8 Geographical location profile . 60
5.9 Dynamics profile . 60
5.10 Equipment boundary profile . 61
6 Package CoreEquipmentProfile . 61
6.1 General . 61
6.2 (abstract) EarthFaultCompensator . 83
6.3 (abstract) EnergyArea . 84
6.4 (abstract) EnergyConnection . 84
6.5 EnergyConsumer . 85
6.6 EnergySchedulingType . 86
6.7 TapSchedule . 86
6.8 EnergySource . 87
6.9 (abstract) Equipment . 88
6.10 (abstract) EquipmentContainer . 89
6.11 (abstract) ACDCConverter . 90
6.12 ACDCConverterDCTerminal . 91
6.13 (abstract) ACDCTerminal . 92
6.14 ACLineSegment . 93
6.15 ActivePowerLimit . 94
6.16 ApparentPowerLimit . 95
6.17 AsynchronousMachine . 95
6.18 (abstract) AuxiliaryEquipment . 96
6.19 BaseVoltage . 97
6.20 (abstract) BasicIntervalSchedule . 97
6.21 BatteryUnit . 98
6.22 Bay . 99
6.23 (European) BoundaryPoint . 99
6.24 Breaker . 101
6.25 BusbarSection . 102
6.26 BusNameMarker . 103

IEC 61970-600-2:2021 © IEC 2021 – 3 –
6.27 CAESPlant . 103
6.28 Clamp . 104
6.29 ConformLoadSchedule . 105
6.30 CogenerationPlant . 105
6.31 CombinedCyclePlant . 106
6.32 (abstract) ConductingEquipment . 106
6.33 (abstract) Conductor . 107
6.34 ConformLoad . 108
6.35 ConformLoadGroup. 108
6.36 ConnectivityNode . 109
6.37 (abstract) ConnectivityNodeContainer . 110
6.38 (abstract) Connector . 110
6.39 ControlArea . 111
6.40 ControlAreaGeneratingUnit . 112
6.41 CsConverter. 112
6.42 CurrentLimit . 114
6.43 CurrentTransformer . 114
6.44 (abstract) Curve . 115
6.45 CurveData root class . 116
6.46 Cut. 116
6.47 DayType . 117
6.48 (abstract) DCBaseTerminal . 118
6.49 DCBreaker . 118
6.50 DCBusbar . 119
6.51 DCChopper . 120
6.52 (abstract) DCConductingEquipment . 120
6.53 DCConverterUnit . 121
6.54 DCDisconnector . 122
6.55 (abstract) DCEquipmentContainer . 122
6.56 DCGround . 123
6.57 DCLine . 123
6.58 DCLineSegment . 124
6.59 DCNode . 125
6.60 RegulationSchedule . 125
6.61 DCSeriesDevice . 126
6.62 DCShunt . 127
6.63 DCSwitch . 128
6.64 DCTerminal. 128
6.65 Disconnector . 129
6.66 DisconnectingCircuitBreaker . 130
6.67 EquivalentBranch . 130
6.68 (abstract) EquivalentEquipment . 131
6.69 EquivalentInjection . 132
6.70 EquivalentNetwork . 133
6.71 EquivalentShunt . 134
6.72 ExternalNetworkInjection . 134
6.73 FaultIndicator . 135
6.74 FossilFuel . 136
6.75 Fuse . 137

– 4 – IEC 61970-600-2:2021 © IEC 2021
6.76 GeneratingUnit . 137
6.77 GeographicalRegion . 139
6.78 GrossToNetActivePowerCurve . 139
6.79 Ground . 140
6.80 GroundDisconnector . 141
6.81 GroundingImpedance . 141
6.82 HydroGeneratingUnit . 142
6.83 HydroPowerPlant . 143
6.84 HydroPump . 144
6.85 (abstract) IdentifiedObject root class . 144
6.86 Jumper . 145
6.87 Junction . 146
6.88 Line . 146
6.89 LinearShuntCompensator . 147
6.90 LoadArea . 148
6.91 LoadBreakSwitch . 148
6.92 (abstract) LoadGroup . 149
6.93 LoadResponseCharacteristic . 149
6.94 NonConformLoad . 152
6.95 NonConformLoadGroup . 152
6.96 NonConformLoadSchedule . 153
6.97 NonlinearShuntCompensator . 154
6.98 NonlinearShuntCompensatorPoint root class . 155
6.99 NuclearGeneratingUnit . 155
6.100 (abstract) OperationalLimit . 156
6.101 OperationalLimitSet . 157
6.102 OperationalLimitType . 158
6.103 PetersenCoil . 158
6.104 (abstract) PhaseTapChanger . 159
6.105 PhaseTapChangerAsymmetrical . 160
6.106 PhaseTapChangerLinear . 161
6.107 (abstract) PhaseTapChangerNonLinear . 162
6.108 PhaseTapChangerSymmetrical . 163
6.109 PhaseTapChangerTable . 164
6.110 PhaseTapChangerTablePoint . 164
6.111 PhaseTapChangerTabular . 165
6.112 PhotoVoltaicUnit . 166
6.113 PostLineSensor . 166
6.114 PotentialTransformer . 167
6.115 PowerElectronicsConnection . 168
6.116 (abstract) PowerElectronicsUnit . 169
6.117 PowerElectronicsWindUnit . 169
6.118 (abstract) PowerSystemResource . 170
6.119 PowerTransformer . 171
6.120 PowerTransformerEnd . 171
6.121 (abstract) ProtectedSwitch . 173
6.122 RatioTapChanger . 174
6.123 RatioTapChangerTable . 175
6.124 RatioTapChangerTablePoint . 175

IEC 61970-600-2:2021 © IEC 2021 – 5 –
6.125 ReactiveCapabilityCurve . 176
6.126 (abstract) RegulatingCondEq . 176
6.127 RegulatingControl . 177
6.128 RegularTimePoint root class . 178
6.129 (abstract) RegularIntervalSchedule . 179
6.130 ReportingGroup . 179
6.131 (abstract) RotatingMachine . 180
6.132 Season . 181
6.133 (abstract) Sensor . 181
6.134 (abstract) SeasonDayTypeSchedule . 182
6.135 SeriesCompensator . 182
6.136 (abstract) ShuntCompensator . 183
6.137 SolarGeneratingUnit . 184
6.138 (European) SolarPowerPlant . 185
6.139 StaticVarCompensator . 185
6.140 StationSupply . 187
6.141 SubGeographicalRegion . 187
6.142 SubLoadArea . 188
6.143 Substation . 189
6.144 SurgeArrester . 189
6.145 Switch . 190
6.146 SwitchSchedule . 191
6.147 SynchronousMachine . 191
6.148 (abstract) TapChanger . 192
6.149 TapChangerControl . 193
6.150 (abstract) TapChangerTablePoint root class . 194
6.151 Terminal . 195
6.152 ThermalGeneratingUnit . 196
6.153 TieFlow . 197
6.154 (abstract) TransformerEnd . 198
6.155 VoltageLevel . 198
6.156 VoltageLimit . 199
6.157 VsCapabilityCurve . 200
6.158 VsConverter . 200
6.159 WaveTrap . 201
6.160 WindGeneratingUnit . 202
6.161 (European) WindPowerPlant . 203
6.162 ControlAreaTypeKind enumeration . 203
6.163 Currency enumeration . 204
6.164 CurveStyle enumeration . 208
6.165 DCConverterOperatingModeKind enumeration . 208
6.166 DCPolarityKind enumeration . 208
6.167 FuelType enumeration . 208
6.168 GeneratorControlSource enumeration . 209
6.169 HydroEnergyConversionKind enumeration . 209
6.170 HydroPlantStorageKind enumeration . 209
6.171 HydroTurbineKind enumeration . 210
6.172 (European) LimitKind enumeration . 210
6.173 OperationalLimitDirectionKind enumeration. 212

– 6 – IEC 61970-600-2:2021 © IEC 2021
6.174 PhaseCode enumeration . 212
6.175 RegulatingControlModeKind enumeration . 213
6.176 SynchronousMachineKind enumeration . 213
6.177 (deprecated) SVCControlMode enumeration . 214
6.178 UnitMultiplier enumeration . 214
6.179 UnitSymbol enumeration . 215
6.180 WindGenUnitKind enumeration . 220
6.181 WindingConnection enumeration . 221
6.182 ActivePower datatype . 221
6.183 ActivePowerPerCurrentFlow datatype . 221
6.184 ActivePowerPerFrequency datatype . 222
6.185 AngleDegrees datatype . 222
6.186 ApparentPower datatype . 222
6.187 Capacitance datatype . 222
6.188 Conductance datatype . 223
6.189 CurrentFlow datatype . 223
6.190 Frequency datatype . 223
6.191 Inductance datatype . 224
6.192 Length datatype . 224
6.193 Money datatype . 224
6.194 PerCent datatype . 224
6.195 Reactance datatype . 225
6.196 ReactivePower datatype . 225
6.197 RealEnergy datatype. 225
6.198 Resistance datatype . 225
6.199 RotationSpeed datatype . 226
6.200 Seconds datatype . 226
6.201 Susceptance datatype . 226
6.202 Voltage datatype . 227
6.203 VoltagePerReactivePower datatype . 227
6.204 Boolean primitive . 227
6.205 Date primitive. 227
6.206 DateTime primitive . 227
6.207 Decimal primitive . 227
6.208 Float primitive . 227
6.209 Integer primitive . 227
6.210 MonthDay primitive . 228
6.211 String primitive . 228
7 Package OperationProfile . 228
7.1 General . 228
7.2 Accumulator . 231
7.3 AccumulatorLimit . 231
7.4 AccumulatorLimitSet . 232
7.5 AccumulatorReset . 232
7.6 AccumulatorValue . 233
7.7 (abstract) ACDCTerminal . 234
7.8 Analog . 234
7.9 (abstract) AnalogControl . 234
7.10 AnalogLimit . 235

IEC 61970-600-2:2021 © IEC 2021 – 7 –
7.11 AnalogLimitSet . 236
7.12 AnalogValue . 236
7.13 Command . 237
7.14 (abstract) Control . 237
7.15 Discrete . 238
7.16 DiscreteValue . 239
7.17 (abstract) IdentifiedObject root class . 239
7.18 (abstract) IOPoint . 240
7.19 (abstract) Limit . 240
7.20 (abstract) LimitSet . 241
7.21 (abstract) Measurement . 241
7.22 (abstract) MeasurementValue . 242
7.23 MeasurementValueQuality . 243
7.24 MeasurementValueSource . 244
7.25 (abstract) PowerSystemResource . 244
7.26 (abstract) Quality61850 root class . 244
7.27 RaiseLowerCommand . 245
7.28 SetPoint . 246
7.29 StringMeasurement . 247
7.30 StringMeasurementValue . 247
7.31 (abstract) Terminal . 248
7.32 ValueAliasSet . 248
7.33 ValueToAlias . 249
7.34 PhaseCode enumeration . 249
7.35 Source enumeration . 250
7.36 UnitMultiplier enumeration . 251
7.37 UnitSymbol enumeration . 252
7.38 Validity enumeration . 257
7.39 PerCent datatype . 257
7.40 Boolean primitive . 258
7.41 Date primitive. 258
7.42 DateTime primitive . 258
7.43 Float primitive . 258
7.44 Integer primitive . 258
7.45 String primitive . 258
8 Package ShortCircuitProfile . 258
8.1 General . 258
8.2 (abstract) ACDCTerminal . 260
8.3 (Description) ACLineSegment . 260
8.4 (Description) AsynchronousMachine . 261
8.5 (Description) BusbarSection . 261
8.6 (abstract) ConductingEquipment . 262
8.7 (abstract) Conductor . 262
8.8 (abstract) Connector . 262
8.9 (abstract) EarthFaultCompensator . 263
8.10 (abstract) EnergyConnection . 263
8.11 (Description) EnergySource . 263
8.12 (abstract) Equipment . 264
8.13 (Description) EquivalentBranch . 264

– 8 – IEC 61970-600-2:2021 © IEC 2021
8.14 (abstract) EquivalentEquipment . 266
8.15 (Description) EquivalentInjection . 266
8.16 (Description) ExternalNetworkInjection. 267
8.17 (Description) GroundingImpedance . 267
8.18 (abstract) IdentifiedObject root class . 268
8.19 (Description) LinearShuntCompensator . 268
8.20 MutualCoupling . 268
8.21 (Description) NonlinearShuntCompensatorPoint root class. 269
8.22 (Description) PetersenCoil
...