SIST EN 13848-1:2004+A1:2008
(Main)Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry
Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry
This European Standard specifies the requirements for the homologation of track geometry quality parameters as measured by various measuring devices fitted on track recording vehicles. These measuring devices are described in Part 2 of the standard. This European Standard applies to all track geometry parameters including track gauge, longitudinal level, alignment, cross level (cant / superelevation) and twist. It defines each parameter and specifies the requirements for measurement, the analysis methods and the presentation of results. Parts 3 and 4 give a description of measuring devices complying partially with this Part 1 according to the specificities of respectively track construction and maintenance machines, and manual and lightweight devices.
Bahnanwendungen - Oberbau - Gleislagequalität - Teil 1: Beschreibung der Gleisgeometrie
Applications ferroviaires - Voie - Qualité géométrique de la voie - Partie 1: Caractérisation de la géométrie de voie
!Cette Norme européenne spécifie les exigences pour l’homologation des paramètres de qualité géométrique de
la voie tels qu’ils sont mesurés par divers systèmes de mesure fixés sur les véhicules d’enregistrement de la voie."
Ces systèmes de mesure sont décrits dans la !Partie 2" de la norme. La présente Norme européenne s’applique
à tous les paramètres de géométrie de la voie, y compris l’écartement de la voie, le nivellement longitudinal,
le dressage, le dévers et le gauche. Elle définit chaque paramètre et spécifie les exigences pour la mesure,
les méthodes d’analyse, et la présentation des résultats. !Les Parties 3 et 4 donnent une description des systèmes
de mesure satisfaisant partiellement à la présente Partie 1 de la norme, par rapport aux spécificités des engins
de travaux et de maintenance de la voie, ainsi qu’aux spécificités des dispositifs manuels et de faible poids."
Železniške naprave - Zgornji ustroj - Kakovost tirne geometrije - 1. del: Karakteristike tirne geometrije
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zgornji ustroj - Kakovost tirne geometrije - 1. del: Karakteristike tirne geometrijeBahnanwendungen - Oberbau - Gleislagequalität - Teil 1: Beschreibung der GleisgeometrieApplications ferroviaires - Voie - Qualité géométrique de la voie - Partie 1: Caractérisation de la géométrie de voieRailway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry93.100Gradnja železnicConstruction of railways45.080Rails and railway componentsICS:Ta slovenski standard je istoveten z:EN 13848-1:2003+A1:2008SIST EN 13848-1:2004+A1:2008en01-september-2008SIST EN 13848-1:2004+A1:2008SLOVENSKI
STANDARD
SIST EN 13848-1:2004+A1:2008
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13848-1:2003+A1
July 2008 ICS 93.100 Supersedes EN 13848-1:2003English Version
Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry
Applications ferroviaires - Voie - Qualité géométrique de la voie - Partie 1: Caractérisation de la géométrie de voie
Bahnanwendungen - Oberbau - Gleislagequalität - Teil 1: Beschreibung der Gleisgeometrie This European Standard was approved by CEN on 26 June 2003 and includes Amendment 1 approved by CEN on 6 June 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13848-1:2003+A1:2008: ESIST EN 13848-1:2004+A1:2008
EN 13848-1:2003+A1:2008 (E) 2 Contents Foreword.4 Introduction.5 1 Scope.6 2 Normative references.6 3 Terms, definitions, symbols and abbreviated terms.6 3.1 Terms and definitions.6 3.2 Symbols and abbreviated terms.7 4 Principal track geometric parameters.8 4.1 Description of the track co-ordinate system.8 4.2 Track gauge.9 4.2.1 !Definition.9 4.2.2 Measurement method.10 4.2.3 Wavelength range.11 4.2.4 Resolution.11 4.2.5 Measurement uncertainty.11 4.2.6 Range of measurement.11 4.2.7 Analysis method.11 4.2.8 Output requirements.11 4.2.9 Output presentation.11 4.3 Longitudinal level.11 4.3.1 Definition.11 4.3.2 Measurement method.12 4.3.3 Wavelength range.12 4.3.4 Resolution.13 4.3.5 Measurement uncertainty.13 4.3.6 Range of measurement.13 4.3.7 Analysis method.13 4.3.8 Output requirements.13 4.3.9 Output presentation.14 4.4 Cross level.14 4.4.1 Definition.14 4.4.2 Measurement method.14 4.4.3 Wavelength range.15 4.4.4 Resolution.15 4.4.5 Measurement uncertainty.15 4.4.6 Range of measurement.15 4.4.7 Analysis method.15 4.4.8 Output requirements.15 4.4.9 Output presentation.15 4.5 Alignment.15 4.5.1 Definition.15 4.5.2 Measurement method.16 4.5.3 Wavelength range.16 4.5.4 Resolution.16 4.5.5 Measurement uncertainty.17 4.5.6 Range of measurement.17 4.5.7 Analysis method.17 4.5.8 Output requirements.17 4.5.9 Output presentation.17 4.6 Twist.18 4.6.1 Definition.18 SIST EN 13848-1:2004+A1:2008
EN 13848-1:2003+A1:2008 (E) 3 4.6.2 Measurement method.18 4.6.3 Wavelength range.18 4.6.4 Resolution.18 4.6.5 Measurement uncertainty.18 4.6.6 Range of measurement.18 4.6.7 Analysis methods.18 4.6.8 Output requirements.19 4.6.9 Output presentation.19 5 Measurement conditions.19 Annex A (informative)
Measurement of acceleration.20 A.1 Introduction.20 A.2 Measurement method.20 A.3 Frequency range.20 A.4 Range of measurement.20 A.5 Sampling frequency.21 A.6 Measurement conditions.21 A.7 Analysis method.21 A.8 Output requirements.21 A.9 Output presentation.21 Annex B (informative)
Other Parameters.22 Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or other provisions of EU Directives.24
SIST EN 13848-1:2004+A1:2008
EN 13848-1:2003+A1:2008 (E) 4 Foreword This document (EN 13848-1:2003+A1:2008) has been prepared by Technical Committee CEN/TC 256 "Railway applications", the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2009 and conflicting national standards shall be withdrawn at the latest by January 2009. This document includes Amendment 1, approved by CEN on 2008-06-06. This document supersedes EN 13848-1:2003. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ". This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. Annex A and B are informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 13848-1:2004+A1:2008
EN 13848-1:2003+A1:2008 (E) 5 Introduction This European Standard defines the minimum requirements for the principal track geometric parameters that characterise track geometry quality. Other parameters, for example, acceleration and rail characteristics, also have an important role in contributing towards ride quality. Refer to annexes A and B for further information on these parameters. It comprises two informative annexes (annex A and annex B). This European Standard is one of the series EN 13848 “Railway applications/Track - Track geometry quality” as listed below: Part 1 : Characterization of track geometry Part 2 : Measuring devices - Track recording vehicles !Part 3 : Measuring systems — Track construction and maintenance machines Part 4 : Measuring systems — Manual and lightweight devices Part 5 : Geometric quality levels" SIST EN 13848-1:2004+A1:2008
EN 13848-1:2003+A1:2008 (E) 6
1 Scope !This European Standard specifies the requirements for the homologation of track geometry quality parameters as measured by various measuring devices fitted on track recording vehicles." These measuring devices are described in !Part 2" of the standard. This European Standard applies to all track geometry parameters including track gauge, longitudinal level, alignment, cross level (cant / superelevation) and twist. It defines each parameter and specifies the requirements for measurement, the analysis methods and the presentation of results. !Parts 3 and 4 give a description of measuring devices complying partially with this Part 1 according to the specificities of respectively track construction and maintenance machines, and manual and lightweight devices." 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). !EN 13848-2, Railway applications — Track — Track geometry quality — Part 2: Measuring systems — Track recording vehicles" ENV 13005:1999, Guide to the expression of uncertainty in measurement 3 Terms, definitions, symbols and abbreviated terms 3.1 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply (refer also to the terms and definitions described in clause 4 of this part). 3.1.1 track geometry quality assessment of excursions from the mean or designed geometrical characteristics of specified parameters in the vertical and lateral planes which give rise to safety concerns or have a correlation with ride quality 3.1.2 gauge face inside face of the running rail head 3.1.3 running table upper surface of the head of the rail 3.1.4 running surface curved surface defined by the longitudinal displacement of a straight line perpendicular to the centre-line of the track and tangential to both running tables 3.1.5 running plane plane tangential to the running surface at the point of measurement SIST EN 13848-1:2004+A1:2008
EN 13848-1:2003+A1:2008 (E) 7 3.1.6 uncertainty refer to the definition in ENV 13005:1999 3.1.7 measured value refer to the definition in ENV 13005:1999 3.1.8 resolution smallest change in the value of a quantity to be measured which produces a detectable change in the indication of the measuring instrument 3.1.9 wavelength range space domain taken by the parameters’ components 3.1.10 sampling distance travelled distance between any two consecutive measurement points on the same rail 3.1.11 range of measurement specific domain described by its limits 3.2 Symbols and abbreviated terms For the purposes of this standard, symbols and abbreviated terms applied are specified in the Table 1. SIST EN 13848-1:2004+A1:2008
EN 13848-1:2003+A1:2008 (E) 8 Table 1 — Symbols
No. Symbol Designation Unit 1 G
Track gauge mm 2 Zp !Limit of the range below the running surface within which the gauge is measured. Zp is always 14 mm." mm 3 Zp'1
Deviation in the direction of consecutive running table levels on left hand rail. Used in the measurement of Longitudinal Level. mm 4 Zp'2 Deviation in the direction of consecutive running table levels on right hand rail. Used in the measurement of Longitudinal Level. mm 5 yp
Distance between point P and a reference line. Used in the measurement of Alignment mm 6 P
Gauge face contact point
7 D1, D2, D3
Wavelength ranges m 8 λ Wavelength m 9 V1 Amplitude from the zero line. Used in the measurement of Twist mm/m 10 V2 Amplitude from the mean value. Used in the measurement of Twist mm/m 11 l Twist base-length m 12 X, Y,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.