oSIST prEN ISO 13679:2009
(Main)Petroleum and natural gas industries - Procedures for testing casing and tubing connections (ISO/DIS 13679:2009)
Petroleum and natural gas industries - Procedures for testing casing and tubing connections (ISO/DIS 13679:2009)
2021-02-04 (data): WI cancelled following cancellation of the corresponding ISO WI in 2018.
Erdöl- und Erdgasindustrie - Prüfverfahren an Verbindungen für Futter- und Steigrohre (ISO/DIS 13679:2009)
Industries du pétrole et du gaz naturel - Procédures de test des connexions pour tubes de cuvelage et de production (ISO/DIS 13679:2009)
Industrija za predelavo nafte in zemeljskega plina - Postopki za preskušanje spojev za zaščitne in proizvodne (dvižne) cevi (ISO/DIS 13679:2009)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 13679:2009
01-julij-2009
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD3RVWRSNL]DSUHVNXãDQMH
VSRMHY]D]DãþLWQHLQSURL]YRGQH GYLåQH FHYL ,62',6
Petroleum and natural gas industries - Procedures for testing casing and tubing
connections (ISO/DIS 13679:2009)
Erdöl- und Erdgasindustrie - Prüfverfahren an Verbindungen für Futter- und Steigrohre
(ISO/DIS 13679:2009)
Industries du pétrole et du gaz naturel - Procédures de test des connexions pour tubes
de cuvelage et de production (ISO/DIS 13679:2009)
Ta slovenski standard je istoveten z: prEN ISO 13679
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
75.200 2SUHPD]DVNODGLãþHQMH Petroleum products and
QDIWHQDIWQLKSURL]YRGRYLQ natural gas handling
]HPHOMVNHJDSOLQD equipment
oSIST prEN ISO 13679:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 13679:2009
---------------------- Page: 2 ----------------------
oSIST prEN ISO 13679:2009
EUROPEAN STANDARD
DRAFT
prEN ISO 13679
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2009
ICS 75.180.10 Will supersede EN ISO 13679:2006
English Version
Petroleum and natural gas industries - Procedures for testing
casing and tubing connections (ISO/DIS 13679:2009)
Industries du pétrole et du gaz naturel - Procédures de test Erdöl- und Erdgasindustrie - Prüfverfahren an
des connexions pour tubes de cuvelage et de production Verbindungen für Futter- und Steigrohre (ISO/DIS
(ISO/DIS 13679:2009) 13679:2009)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 12.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 13679:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN ISO 13679:2009
prEN ISO 13679:2009 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
oSIST prEN ISO 13679:2009
prEN ISO 13679:2009 (E)
Foreword
This document (prEN ISO 13679:2009) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum and natural gas industries" in collaboration with Technical
Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries”, the secretariat of which is held by AFNOR.
This document is currently submitted to the parallel Enquiry.
This document will supersede EN ISO 13679:2006.
Endorsement notice
The text of ISO/DIS 13679:2009 has been approved by CEN as a prEN ISO 13679:2009 without any
modification.
3
---------------------- Page: 5 ----------------------
oSIST prEN ISO 13679:2009
---------------------- Page: 6 ----------------------
oSIST prEN ISO 13679:2009
DRAFT INTERNATIONAL STANDARD ISO/DIS 13679
ISO/TC 67/SC 5 Secretariat: JISC
Voting begins on: Voting terminates on:
2009-05-14 2009-10-14
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Petroleum and natural gas industries — Procedures for testing
casing and tubing connections
Industries du pétrole et du gaz naturel — Procédures de test des co
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.