SIST EN 13498:2003
(Main)Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS)
Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS)
This European Standard specifies equipment and a procedure for determining the resistance to penetration of external thermal insulation composite systems. It is applicable to external thermal insulation composite systems (ETICS).
Wärmedämmstoffe für das Bauwesen - Bestimmung des Eindringwiderstandes von außenseitigen Wärmedämm-Verbundsystemen (WDVS)
Diese Europäische Norm legt Prüfeinrichtungen und ein Verfahren zur Bestimmung des Eindringwiderstandes von außenseitigen Wärmedämm-Verbundsystemen (WDVS) fest.
Produits isolants thermiques pour le bâtiment - Détermination de la résistance a la pénétration des systemes composites d'isolation thermique par l'extérieur (systemes I.T.E.)
La présente norme européenne prescrit l'équipement et un mode opératoire pour déterminer la résistance a la pénétration des systemes composites d'isolation thermique par l'extérieur (ETICS). Elle est applicable aux ETICS.
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu – Ugotavljanje odpornosti proti preboju kontaktnih fasadnih toplotnoizolacijskih sistemov (ETICS)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu – Ugotavljanje odpornosti proti preboju kontaktnih fasadnih toplotnoizolacijskih sistemov (ETICS)Wärmedämmstoffe für das Bauwesen - Bestimmung des Eindringwiderstandes von außenseitigen Wärmedämm-Verbundsystemen (WDVS)Produits isolants thermiques pour le bâtiment - Détermination de la résistance a la pénétration des systemes composites d'isolation thermique par l'extérieur (systemes I.T.E.)Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS)91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13498:2002SIST EN 13498:2003en01-december-2003SIST EN 13498:2003SLOVENSKI
STANDARD
SIST EN 13498:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13498October 2002ICS 91.100.60English versionThermal insulation products for building applications -Determination of the resistance to penetration of externalthermal insulation composite systems (ETICS)Produits isolants thermiques destinés aux applications dubâtiment - Détermination de la résistance à la pénétrationdes systèmes d'isolation par l'extérieur (systèmes I.T.E.)Wärmedämmstoffe für das Bauwesen - Bestimmung desEindringwiderstandes von außenseitigen Wärmedämm-Verbundsystemen (WDVS)This European Standard was approved by CEN on 19 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13498:2002 ESIST EN 13498:2003
EN 13498:2002 (E)2ContentsForeword.31Scope.42Normative references.43Terms and definitions.44Principle.45Apparatus.45.1Test apparatus.45.2Measurement of force.56Test specimens.56.1Preparation and number of
test specimen.56.2Conditioning of test specimens.57Procedure.67.1Test conditions.67.2Test procedure.68Calculation and expression of results.69Accuracy of measurement.610Test report.6SIST EN 13498:2003
EN 13498:2002 (E)3ForewordThis document (EN 13498:2002) has been prepared by Technical Committee CEN /TC 88, "Thermal insulatingmaterials and products", the secretariat of which is held by DINThis European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest byApril 2003This European Standard is one of a series of standards which specify test methods for determining dimensions andproperties of thermal insulating materials and products. It supports a series of product standards for thermalinsulating materials and products which derive from the Council Directive of 21 December 1988 on theapproximation of laws, regulations and administrative provisions of the Member States relating to constructionproducts (Directive 89/106/EEC) through the consideration of the essential requirements.This European Standard has been drafted for applications in buildings but may also be used in other areas where itis relevant.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13498:2003
EN 13498:2002 (E)41 ScopeThis European Standard specifies equipment and a procedure for determining the resistance to penetration ofexternal thermal insulation composite systems.2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the te
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.