SIST EN 62675:2015
(Main)Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride prismatic rechargeable single cells for industrial applications (IEC 62675:2014)
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride prismatic rechargeable single cells for industrial applications (IEC 62675:2014)
This International Standard specifies marking, designation, dimensions, tests and
requirements for sealed nickel-metal hydride prismatic secondary single cells.
NOTE In this context, "prismatic" refers to cells having rectangular sides and base.
When there exists an IEC standard specifying test conditions and requirements for cells used
in special applications and which is in conflict with this standard, the former takes precedence.
Akkumulatoren und Batterien mit alkalischem oder anderen nichtsäurehaltigen Elektrolyten - Prismatische wiederaufladbare gasdichte Nickel-Metallhydrid-Einzelzellen für industrielle Anwendungen (IEC 62675:2014)
Accumulateurs alcalins et autres accumulateurs à électrolyte non acide - Éléments individuels parallélépipédiques rechargeables étanches au nickelmétal hydrure (CEI 62675:2014)
L'IEC 62675:2014 spécifie le marquage, la désignation, les dimensions, les essais et les exigences applicables aux éléments individuels parallélépipédiques étanches au nickel-métal hydrure.
Sekundarni členi in baterije z alkalnimi ali drugimi nekislinskimi elektroliti - Zatesnjeni nikelj-kovinski hidridni prizmatični ponovno polnljivi enojni členi za industrijsko uporabo (IEC 62675:2014)
Ta mednarodni standard določa označevanje, poimenovanje, dimenzije, preskuse in zahteve za zatesnjene nikelj-kovinske hidridne prizmatične sekundarne enojne člene.
OPOMBA: V tem kontekstu se izraz »prizmatičen« nanaša na člene s pravokotnimi stranicami in osnovo.
Če obstaja standard IEC, ki določa preskusne pogoje in zahteve za člene za posebno uporabo ter je v nasprotju s tem standardom, ima prednost prvi.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62675:2015
01-maj-2015
6HNXQGDUQLþOHQLLQEDWHULMH]DONDOQLPLDOLGUXJLPLQHNLVOLQVNLPLHOHNWUROLWL
=DWHVQMHQLQLNHOMNRYLQVNLKLGULGQLSUL]PDWLþQLSRQRYQRSROQOMLYLHQRMQLþOHQL]D
LQGXVWULMVNRXSRUDER ,(&
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed
nickel-metal hydride prismatic rechargeable single cells for industrial applications (IEC
62675:2014)
Akkumulatoren und Batterien mit alkalischem oder anderen nichtsäurehaltigen
Elektrolyten - Prismatische wiederaufladbare gasdichte Nickel-Metallhydrid-Einzelzellen
für industrielle Anwendungen (IEC 62675:2014)
$FFXPXODWHXUVDOFDOLQVHWDXWUHVDFFXPXODWHXUVjpOHFWURO\WHQRQDFLGHeOpPHQWV
LQGLYLGXHOVSDUDOOpOpSLSpGLTXHVUHFKDUJHDEOHVpWDQFKHVDXQLFNHOPpWDOK\GUXUH
&(,
Ta slovenski standard je istoveten z: EN 62675:2014
ICS:
29.220.20 .LVOLQVNLVHNXQGDUQLþOHQLLQ Acid secondary cells and
EDWHULMH batteries
SIST EN 62675:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62675:2015
---------------------- Page: 2 ----------------------
SIST EN 62675:2015
EUROPEAN STANDARD EN 62675
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2014
ICS 29.220.99
English Version
Secondary cells and batteries containing alkaline or other non-
acid electrolytes - Sealed nickel-metal hydride prismatic
rechargeable single cells
(IEC 62675:2014)
Accumulateurs alcalins et autres accumulateurs à Akkumulatoren und Batterien mit alkalischem oder anderen
électrolyte non acide - Éléments individuels nichtsäurehaltigen Elektrolyten - Prismatische
parallélépipédiques rechargeables étanches au nickelmétal wiederaufladbare gasdichte Nickel-Metallhydrid-
hydrure Einzelzellen für industrielle Anwendungen
(CEI 62675:2014) (IEC 62675:2014)
This European Standard was approved by CENELEC on 2014-10-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62675:2014 E
---------------------- Page: 3 ----------------------
SIST EN 62675:2015
EN 62675:2014 - 2 -
Foreword
The text of document 21A/550/FDIS, future edition 1 of IEC 62675, prepared by SC 21A "Secondary
cells and batteries containing alkaline or other non-acid electrolytes", of IEC TC 21, "Secondary cells
and batteries", was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62675:2014.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2015-07-01
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2017-10-01
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62675:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60051 Series NOTE Harmonised as EN 60051 Series.
IEC 61434 NOTE Harmonised as EN 61434.
---------------------- Page: 4 ----------------------
SIST EN 62675:2015
- 3 - EN 62675:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-482 2004 International Electrotechnical Vocabulary - -
(IEV) -- Part 482: Primary and secondary
cells and batteries
---------------------- Page: 5 ----------------------
SIST EN 62675:2015
---------------------- Page: 6 ----------------------
SIST EN 62675:2015
IEC 62675
®
Edition 1.0 2014-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Secondary cells and batteries containing alkaline or other non-acid
electrolytes – Sealed nickel-metal hydride prismatic rechargeable single cells
Accumulateurs alcalins et autres accumulateurs à électrolyte non acide –
Éléments individuels parallélépipédiques rechargeables étanches au nickel-
métal hydrure
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX Q
ICS 29.220.99 ISBN 978-2-8322-1845-7
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 62675:2015
– 2 – IEC 62675:2014 IEC 2014
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Parameter measurement tolerances . 7
5 Designation and marking . 7
5.1 Cell designation . 7
5.2 Cell termination . 8
5.3 Marking . 8
5.4 Safety recommendations . 8
6 Dimensions. 8
7 Electrical tests . 10
7.1 General . 10
7.2 Charging procedure for test purposes . 10
7.3 Discharge performance . 10
7.3.1 General . 10
7.3.2 Discharge performance at 20 °C . 10
7.3.3 Discharge performance at +5 °C . 11
7.3.4 Discharge performance at –18 °C . 11
7.3.5 High rate current test . 12
7.4 Charge retention . 12
7.5 Endurance . 13
7.5.1 Endurance in cycles. 13
7.5.2 Permanent charge endurance . 13
7.6 Charge acceptance at constant voltage . 14
7.7 Overcharge . 14
7.8 Vent plug operation . 14
7.9 Safety device operation . 14
7.10 Gas leakage test . 15
7.11 Storage . 15
8 Mechanical tests . 15
9 Physical appearance . 15
10 Conditions for approval and acceptance . 15
10.1 Type approval . 15
10.2 Batch acceptance . 16
Bibliography . 17
Figure 1 – Example of a sealed prismatic cell in steel container with two terminals and
four lugs . 8
Figure 2 – Example of a sealed prismatic cell in plastic container with two terminals . 9
Table 1 – Dimensions for sealed nickel-metal hydride prismatic cells in steel
containers . 9
Table 2 – Dimensions for sealed nickel-metal hydride prismatic cells in plastic
containers . 9
---------------------- Page: 8 ----------------------
SIST EN 62675:2015
IEC 62675:2014 IEC 2014 – 3 –
Table 3 – Measurement tolerances in millimetres (valid for widths and lengths) . 10
Table 4 – Discharge performance at 20 °C . 11
Table 5 – Discharge performance at +5 °C . 11
Table 6 – Discharge performance at –18 °C . 12
Table 7 – High currents values. 12
Table 8 – Endurance in cycles . 13
Table 9 – Sequence of tests for type approval . 16
Table 10 – Recommended test sequence for batch acceptance . 16
---------------------- Page: 9 ----------------------
SIST EN 62675:2015
– 4 – IEC 62675:2014 IEC 2014
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SECONDARY CELLS AND BATTERIES CONTAINING
ALKALINE OR OTHER NON-ACID ELECTROLYTES –
SEALED NICKEL-METAL HYDRIDE PRISMATIC
RECHARGEABLE SINGLE CELLS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62675 has been prepared by subcommittee 21A: Secondary cells
and batteries containing alkaline or other non-acid electrolytes, of IEC technical committee 21:
Secondary cells and batteries.
The text of this standard is based on the following documents:
FDIS Report on voting
21A/550/FDIS 21A/560/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
---------------------- Page: 10 ----------------------
SIST EN 62675:2015
IEC 62675:2014 IEC 2014 – 5 –
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 11 ----------------------
SIST EN 62675:2015
– 6 – IEC 62675:2014 IEC 2014
SECONDARY CELLS AND BATTERIES CONTAINING
ALKALINE OR OTHER NON-ACID ELECTROLYTES –
SEALED NICKEL-METAL HYDRIDE PRISMATIC
RECHARGEABLE SINGLE CELLS
1 Scope
This International Standard specifies marking, designation, dimensions, tests and
requirements for sealed nickel-metal hydride prismatic secondary single cells.
NOTE In this context, "prismatic" refers to cells having rectangular sides and base.
When there exists an IEC standard specifying test conditions and requirements for cells used
in special applications and which is in conflict with this standard, the former takes precedence.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60050-482:2004, International Electrotechnical Vocabulary (IEV) – Part 482: Primary and
secondary cells and batteries
3 Terms and definitions
For the purposes of this document, the terms and definitions given in the IEC 60050-482, as
well as the following apply.
3.1
sealed cell
cell which remains closed and does not release either gas or liquid when operated within the
limits of charge and temperature specified by the manufacturer
Note 1 to entry: The cell is equipped with a safety device to prevent dangerously high internal pressure.
Note 2 to entry: The cell does not require addition to the electrolyte and is designed to operate during its life in its
original sealed state.
Note 3 to entry: The nickel-metal hydride cell, however, may release gas towards the end of its life due to the
accumulation of hydrogen in the cell.
[SOURCE: IEC 60050-482:2004, 482-05-17, modified – The existing note has been developed
into Notes 1, 2 and 3 to entry.]
3.2
nominal voltage
suitable approximate value of voltage used to designate or identify the voltage of a cell or
battery
Note 1 to entry: The nominal voltage of a sealed nickel-metal hydride rechargeable single cell: 1,2 V.
Note 2 to entry: The nominal voltage of a battery of n series connected cells is equal to n times the nominal
voltage of a single cell.
---------------------- Page: 12 ----------------------
SIST EN 62675:2015
IEC 62675:2014 IEC 2014 – 7 –
[SOURCE: IEC 60050-482:2004, 482-03-31, modified – Addition of Notes 1 and 2 to entry.]
3.3
rated capacity
capacity value of a battery determined under specified conditions and declared by the
manufacturer
Note 1 to entry: The rated capacity is the quantity of electricity C Ah (ampere-hours) declared by the
5
manufacturer which a battery can deliver when discharged at the reference test current of 0,2 I A to a final voltag
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.