oSIST prEN IEC 62148-11:2024
(Main)Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator integrated laser diode modules and pump laser diode modules
Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator integrated laser diode modules and pump laser diode modules
Aktive Lichtwellenleiterbauelemente und -geräte – Gehäuse- und Schnittstellennormen – Teil 11: 14-polige modulare integrierte Laserdiodenmodule und Pumplaserdiodenmodule
Composants et dispositifs actifs fibroniques - Normes de boîtier et d’interface - Partie 11: Modules à diodes laser à modulateur intégré et à diodes laser de pompage de 14 broches
Aktivne komponente in naprave optičnih vlaken - Standardi oblike in vmesnika - 11. del: Integrirani modulatorji z lasersko diodo s 14 kontakti in moduli z lasersko diodo za črpanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Aktivne komponente in naprave optičnih vlaken - Standardi oblike in vmesnika -
11. del: Integrirani modulatorji z lasersko diodo s 14 kontakti in moduli z lasersko
diodo za črpanje
Fibre optic active components and devices - Package and interface standards - Part 11:
14-pin modulator integrated laser diode modules and pump laser diode modules
Composants et dispositifs actifs fibroniques - Normes de boîtier et d’interface - Partie 11:
Modules à diodes laser à modulateur intégré et à diodes laser de pompage de 14
broches
Ta slovenski standard je istoveten z: prEN IEC 62148-11:2024
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
86C/1925/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62148-11 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-06-28 2024-09-20
SUPERSEDES DOCUMENTS:
86C/1908/CD, 86C/1921/CC
IEC SC 86C : FIBRE OPTIC SYSTEMS AND ACTIVE DEVICES
SECRETARIAT: SECRETARY:
United States of America Mr Fred Heismann
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC claus es.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator
integrated laser diode modules and pump laser diode modules
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You may not copy or
"mirror" the file or printed version of the document, or any part of it, for any other purpose without permission in writing from IEC.
86C/1925/CDV – 2 – IEC CD 62148-11 © IEC 2024
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviations . 6
3.1 Abbreviations . 6
4 Classification . 7
5 Specifications . 7
5.1 14-pin modulator integrated laser diode modules . 7
5.1.1 Pigtail interface. 7
5.1.2 Electrical interface . 7
5.1.3 Mechanical interface . 8
5.1.4 Case outline . 8
5.2 14-pin pump laser diode modules. 9
5.2.1 Pigtail interface. 9
5.2.2 Electrical interface . 10
5.2.3 Mechanical interface . 10
5.2.4 Case outline . 11
Figure 1 – Electrical terminal numbering assignments (viewed from the top of the
module) . 7
Figure 2 – Case outline for 14-pin modulator integrated laser diode modules . 9
Figure 3 – Electrical terminal numbering assignments (viewed from the top of the
module) . 10
Figure 4 – Case outline for 14-pin pump laser diode modules . 11
Table 1 – Pin-function definitions for modulator integrated laser diode modules . 8
Table 2 – Pin function definitions for pump laser diode modules . 10
IEC CDV 62148-11 © IEC 2024 – 3 – 86C/1925/CDV
1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
4 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
5 PACKAGE AND INTERFACE STANDARDS –
7 Part 11: 14-pin modulator integrated laser diode modules and
8 pump laser diode modules
10 FOREWORD
11 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
12 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
13 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
14 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
15 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
16 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
17 in the subject dealt with may participate in this preparatory work. International, governmental and non -
18 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
19 with the International Organization for Standardization (ISO) in accordance with conditions determined by
20 agreement between the two organizations.
21 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
22 consensus of opinion on the relevant subjects since each technical committee has representation from all
23 interested IEC National Committees.
24 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
25 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
26 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
27 misinterpretation by any end user.
28 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
29 transparently to the maximum extent possible in their national and regional publications. Any divergence
30 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
31 the latter.
32 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
33 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
34 services carried out by independent certification bodies.
35 6) All users should ensure that they have the latest edition of this publication.
36 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
37 members of its technical committees and IEC National Committees for any personal injury, property damage or
38 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
39 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
40 Publications.
41 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
42 indispensable for the correct application of this publication.
43 9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
44 patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
45 respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s),
46 which may be required to implement this document. However, implementers are cautioned that this may not
47 represent the latest information, which may be obtained from the patent database available at
48 https://patents.iec.ch. IEC shall not be held responsible for identifying any or all such patent rights.
49 IEC 62148-11 has been prepared by subcommittee 86C: Fibre optic systems and active
50 devices, of IEC technical committee 86: Fibre optics. It is an International Standard.
51 This third edition cancels and replaces the second edition published in 2009. This edition
52 constitutes a technical revision.
53 This edition includes the following significant technical changes with respect to the previous
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.