SIST EN 300 494-3 V1.3.1:2003

Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)

To be updated with relevant information derived from TBR022 which due to withdrawal after the full enforcement of the new R&TTE Directive.

Digitalne izboljšane brezvrvične telekomunikacije (DECT) – Profil generičnega dostopa (GAP) – Profil preskušalne specifikacije (PTS) – 3. del: Od profila odvisna preskušalna specifikacija (PSTS) – Fiksna radijska zaključitev (FT)

General Information

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT)
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Mandate: T-317
• Ref Project: ETSI EN 300 494-3 V1.3.1 (2001-04) - Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2003
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH'(&7±3URILOJHQHULþQHJD
GRVWRSD*$3±3URILOSUHVNXãDOQHVSHFLILNDFLMH376±GHO2GSURILODRGYLVQD
SUHVNXãDOQDVSHFLILNDFLMD3676±)LNVQDUDGLMVND]DNOMXþLWHY)7
Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP);
Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed
radio Termination (FT)
Ta slovenski standard je istoveten z: EN 300 494-3 Version 1.3.1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

European Standard (Telecommunications series)
Digital Enhanced Cordless Telecommunications (DECT);
Generic Access Profile (GAP);
Profile Test Specification (PTS);
Part 3: Profile Specific Test Specification (PSTS) -
Fixed radio Termination (FT)
2 ETSI EN 300 494-3 V1.3.1 (2001-04)
Reference
REN/DECT-040188-3
Keywords
DECT, GAP, PTS, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone] Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001.
All rights reserved.
ETSI
3 ETSI EN 300 494-3 V1.3.1 (2001-04)
Contents
Intellectual Property Rights .6
Foreword.6
1 Scope.7
2 References.7
3 Definitions and abbreviations.9
3.1 Definitions . 9
3.2 Abbreviations. 9
4 Relevant test cases list .10
4.1 Network (NWK) layer . 10
4.1.1 Test suite structure (TSS). 10
4.1.2 Test case index. 11
4.2 Data Link Control (DLC) layer. 14
4.2.1 Test suite structure. 14
4.2.2 Test case index. 15
4.3 Medium Access Control (MAC) layer. 16
4.3.1 Test suite structure. 16
4.3.2 Test case index. 17
4.4 Physical (PHY) layer. 18
4.4.1 Manufacturer declarations. 18
4.4.2 Normal Transmitted Power (NTP). 18
4.4.2.1 Verdict criteria for IUTs with an integral antenna. 18
4.4.2.2 Verdict criteria for IUTs with external antenna connection(s) . 18
4.4.3 RFP radio receiver sensitivity. 18
4.4.4 Void . 18
4.4.5 Receiver intermodulation performance . 18
5 Additional test cases list.19
5.1 Test purposes . 19
5.1.1 NWK layer . 19
5.1.2 DLC layer. 19
5.1.3 MAC layer. 19
5.1.4 PHY layer. 19
5.2 Test cases. 19
5.2.1 NWK layer . 19
5.2.2 DLC layer. 19
5.2.3 MAC layer. 19
5.2.4 PHY layer. 20
5.2.4.1 Receiver sensitivity tolerance of transmitter deviation variations . 20
5.2.4.1.1 Definition. 20
5.2.4.1.2 Test environment. 20
5.2.4.1.3 Method of measurement . 20
5.2.4.1.4 Verdict criteria . 20
5.2.4.2 Transmission of Z-field. 20
5.2.4.2.1 Definition. 21
5.2.4.2.2 Test environment. 21
5.2.4.2.3 Method of measurement . 21
5.2.4.2.4 Verdict criteria . 21
Annex A (normative): Profile Implementation eXtra Information for Testing (PIXIT)
proforma .22
A.1 General.22
A.2 Profile IXIT Requirements List (XRL).22
A.2.1 NWK layer protocol . 22
ETSI
4 ETSI EN 300 494-3 V1.3.1 (2001-04)
A.2.2 DLC layer protocol. 22
A.2.3 MAC layer protocol. 22
A.2.4 PHY layer protocol. 22
A.3 Profile specific IXIT .22
A.3.1 NWK layer. 22
A.3.2 DLC layer . 22
A.3.3 MAC layer . 23
A.3.4 PHY layer . 23
A.3.5 Configuration constraints. 23
A.4 Declaration of features supported.23
A.4.1 Network layer. 23
Annex B (normative): Profile Conformance Test Report (PCTR) proforma.25
B.1 Identification summary .25
B.1.1 Profile CTR. 25
B.1.2 Implementation Under Test (IUT). 26
B.1.3 Testing environment. 26
B.1.4 Limits and reservations. 26
B.1.5 Comments. 27
B.2 IUT conformance status.27
B.3 Static conformance summary .27
B.4 Dynamic conformance summary.27
B.5 Static conformance review report.28
B.6 Test campaign report .28
B.6.1 NWK layer. 29
B.6.2 DLC layer . 31
B.6.3 MAC layer . 31
B.6.4 PHY layer . 32
B.7 Observations.32
Annex C (normative): System Conformance Test Report (SCTR) proforma .33
C.1 Identification summary .33
C.1.1 System Conformance Test Report (SCTR). 33
C.1.2 Test laboratory . 33
C.1.3 Client. 34
C.1.4 System Under Test (SUT). 34
C.1.5 Profile. 35
C.1.6 Nature of conformance testing. 35
C.1.7 Limits and reservations. 35
C.1.8 Record of agreement. 36
C.1.9 Comments. 36
C.2 System report summary .37
C.2.1 Profile testing summary for GAP NWK layer FT. 37
C.2.2 Profile testing summary for GAP DLC layer FT. 38
C.2.3 Profile testing summary for GAP MAC layer FT. 39
C.2.4 Profile testing summary for GAP PHY layer FT. 40
Annex D (normative): System Conformance Statement (SCS) proforma .41
D.1 Identification summary .41
D.1.1 SCS identification . 41
D.1.2 IUT identification. 41
D.1.3 Client identification. 42
D.1.4 Supplier identification . 42
D.1.5 Manufacturer identification. 43
D.1.6 Protocols identification. 43
ETSI
5 ETSI EN 300 494-3 V1.3.1 (2001-04)
D.1.7 Profile identification. 43
D.2 Miscellaneous system information .44
D.2.1 Configuration. 44
D.2.2 Other information. 44
History .45
ETSI
6 ETSI EN 300 494-3 V1.3.1 (2001-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced Cordless
Telecommunications (DECT).
The present document is part 3 of a multi-part EN covering the Generic Access Profile (GAP) as identified below:
Part 1: "Summary";
Part 2: "Profile Specific Test Specification (PSTS) - Portable radio Termination (PT)";
Part 3: "Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)".
National transposition dates
Date of adoption of this EN: 13 April 2001
Date of latest announcement of this EN (doa): 31 July 2001
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2002
Date of withdrawal of any conflicting National Standard (dow): 31 January 2002
ETSI
7 ETSI EN 300 494-3 V1.3.1 (2001-04)
1 Scope
The present document contains the test specification for Digital Enhanced Cordless Telecommunications (DECT)
Generic Access Profile (GAP) Fixed Part (FP) applications.
The main objective of the GAP test specification is to provide approval tests giving a high probability of air interface
inter-operability between different manufacturer's equipment in different environments (i.e. public, business and
residential).
The ISO standard for the methodology of conformance testing ISO/IEC 9646 parts 1 to 7 [9] to [15] is used as the basis
for the test methodology, and as the basis for the test case specification. This is considered to be unsuitable for Physical
layer testing, and therefore a text description is used.
The test cases listed in the present document have been derived from the DECT Common Interface (CI) Test Case
Library (TCL) [18] to [26]. In addition as far as the Physical layer is concerned EN 300 176 parts 1 [16] and 2 [30]
apply. Additional GAP specific test cases are included where required. The Profile IXIT is based on the DECT CI
PIXITs specified in EN 300 497 [18] to [26].
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
[1] ETSI EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 1: Overview".
[2] ETSI EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 2: Physical Layer (PHL)".
[3] ETSI EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 3: Medium Access Control (MAC) layer".
[4] ETSI EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 4: Data Link Control (DLC) layer".
[5] ETSI EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 5: Network (NWK) layer".
[6] ETSI EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 6: Identities and addressing".
[7] ETSI EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 7: Security features".
[8] ETSI EN 300 444: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP)".
[9] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection; Conformance testing
methodology and framework - Part 1: General concepts".
[10] ISO/IEC 9646-2: "Information technology - Open Systems Interconnection; Conformance testing
methodology and framework - Part 2: Abstract test suite specification".
ETSI
8 ETSI EN 300 494-3 V1.3.1 (2001-04)
[11] ISO/IEC 9646-3: "Information technology - Open Systems Interconnection; Conformance testing
methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)".
[12] ISO/IEC 9646-4: "Information technology - Open Systems Interconnection; Conformance testing
methodology and framework - Part 4: Test realization".
[13] ISO/IEC 9646-5: "Information technology - Open Systems Interconnection; Conformance testing
methodology and framework - Part 5: Requirements on test laboratories and clients for the
conformance assessment process".
[14] ISO/IEC 9646-6: "Information technology - Open Systems Interconnection; Conformance testing
methodology and framework - Part 6: Protocol profile test specification".
[15] ISO/IEC 9646-7: "Information technology - Open Systems Interconnection; Conformance testing
methodology and framework - Part 7: Implementation Conformance Statements".
[16] ETSI EN 300 176-1: "Digital Enhanced Cordless Telecommunications (DECT); Approval test
specification; Part 1: Radio".
[17] ETSI EN 300 476 (all parts): "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma".
[18] ETSI EN 300 497-1: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 1: Test Suite Structure (TSS) and Test Purposes (TP)
for Medium Access Control (MAC) layer".
[19] ETSI EN 300 497-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 2: Abstract Test Suite (ATS) for Medium Access
Control (MAC) layer - Portable radio Termination (PT)".
[20] ETSI EN 300 497-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 3: Abstract Test Suite (ATS) for Medium Access
Control (MAC) layer - Fixed radio Termination (FT)".
[21] ETSI EN 300 497-4: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 4: Test Suite Structure (TSS) and Test
Purposes (TP) - Data Link Control (DLC) layer".
[22] ETSI EN 300 497-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface(CI);Test CaseLibrary(TCL);Part5:AbstractTest Suite(ATS) -DataLinkControl
(DLC) layer".
[23] ETSI EN 300 497-6: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 6: Test Suite Structure (TSS) and Test
Purposes (TP) - Network (NWK) layer - Portable radio Termination (PT)".
[24] ETSI EN 300 497-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface(CI);Test CaseLibrary(TCL);Part7:AbstractTest Suite(ATS) for Network (NWK)
layer - Portable radio Termination (PT)".
[25] ETSI EN 300 497-8: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 8: Test Suite Structure (TSS) and Test
Purposes (TP) - Network (NWK) layer - Fixed radio Termination (FT)".
[26] ETSI EN 300 497-9: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface(CI);Test CaseLibrary(TCL);Part9:AbstractTest Suite(ATS) for Network (NWK)
layer - Fixed radio Termination (FT)".
[27] ETSI ETS 300 474-1: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile requirement list and profile specific Implementation Conformance
Statement (ICS) proforma; Part 1: Portable radio Termination (PT)".
[28] ETSI ETS 300 474-2: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile requirement list and profile specific Implementation Conformance
Statement (ICS) proforma; Part 2: Fixed radio Termination (FT)".
ETSI
9 ETSI EN 300 494-3 V1.3.1 (2001-04)
[29] ETSI EN 300 494-1: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile Test Specification (PTS); Part 1: Summary".
[30] ETSI EN 300 176-2: "Digital Enhanced Cordless Telecommunications (DECT); Approval test
specification; Part 2: Speech".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
- terms given in ISO/IEC 9646 parts 1 to 7 [9] to [15];
- definitions given in EN 300 175 parts 1 to 7 [1] to [7];
- definitions given in EN 300 444 [8].
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AC Authentication Code
ATS Abstract Test Suite
CC Call Control
CI Common Interface
DCK Derived Cipher Key
DLC Data Link Control
FT Fixed radio Termination
GAP Generic Access Profile
ICS Implementation Conformance Statement
IPUI International Portable User Identity
IUT Implementation Under Test
IXIT Implementation eXtra Information for Testing
LCE Link Control Entity
LLME Lower Layer Management Entity
MAC Medium Access Control
MM Mobility Management
NLF New Link Flag
NWK Network
PARK Portable Access Rights Key
PHY Physical
PICS Protocol Implementation Conformance Statement
PIXIT Protocol Implementation eXtra Information for Testing
PT Portable radio Termination
PSTS Profile Specific Test Specification
PTS Profile Test Specification
SARI Secondary Access Rights Identity
SUT System Under Test
TPUI Temporary Portable User Identity
TS Test System
ETSI
10 ETSI EN 300 494-3 V1.3.1 (2001-04)
4 Relevant test cases list
4.1 Network (NWK) layer
This clause includes lists of the test groups and abstract test cases relevant for GAP Profile Test Specification (PTS);
NWK layer Fixed Termination (FT) derived from EN 300 497-9 [26].
NOTE: References when necessary shall be made based on the particular test case name unique through all test
specification EN 300 497 [18] to [26].
4.1.1 Test suite structure (TSS)
Table 1
Test Suite Structure
Suite Name: nwk_ft
Standards Ref: EN 300 444 [8]; EN 300 497-9 [26]
Profile ICS Ref: ETS 300 474-2 [28]
Profile IXIT Ref: EN 300 494-3 (the present document)
Test Method:remote
Comments:
Test Group Reference Test Group Objective
FT/ To check the behaviour of the NWK layer of the FT(IUT)
FT/CC/ To check the IUT CC-state machine behaviour
FT/CC/IT/ To check that the IUT CC-state machine provides sufficient conformance for possible
interconnection without trying to perform thorough testing
FT/CC/CA/ Limited testing that the observable capabilities of the CC entity of the IUT are in
accordance with the static conformance requirements and the additional capabilities
claimed in the PROFILE ICS/PROFILE IXIT
FT/CC/BV/ To test the CC entity of the IUT in response to syntactically and contextual correct
behaviour of the test system
FT/CC/BV/OC/ To check the IUT's behaviours to setup an outgoing call
FT/CC/BV/IC/ To check the IUT's behaviours to setup an incoming call
FT/CC/BV/CI/ To check the IUT's behaviour in information transfer procedures
FT/CC/BV/CR/ To check the IUT's behaviours to release an outgoing/incoming call
FT/CC/RS To check the IUT's behaviour during call related supplementary service procedures
FT/CC/BO/ To check the behaviour of the CC entity of the IUT in response to the messages that are
syntactically correct but not allowed to occur in some states of the CC procedures
FT/CC/BI/ To check the behaviour of the CC entity of the IUT in response to invalid messages
FT/CC/TI/ To verify that the IUT CC timers are with correct values and the IUT is reacting properly
to the expiry of a timer
FT/MM/ To check the behaviour of the Mobility Management entity of the IUT
FT/MM/IT/ To check that the MM entity of the IUT provides sufficient conformance for possible
interconnection without trying to perform thorough testing
FT/MM/CA/ Limited testing that the observable capabilities of the MM entity of the IUT are in
accordance with the static conformance requirements and the additional capabilities
claimed in the PROFILE ICS/PROFILE IXIT
FT/MM/BV/ To test the MM entity of the IUT in response to syntactically and contextual correct
behaviour of the test system
FT/MM/BV/ID/ To check the IUT's behaviour concerning identity procedures
FT/MM/BV/AU/ To check the IUT's behaviour concerning the authentication procedures
FT/MM/BV/LO/ To check the IUT's behaviour concerning the location procedures
FT/MM/BV/AR/ To check the IUT's behaviour concerning the access rights procedures
FT/MM/BV/KA/ To check the IUT's behaviour concerning the key allocation procedure
FT/MM/BV/CH/ To check the IUT's behaviour concerning the ciphering related procedures
FT/MM/BO/ To check the IUT behaviour in response to the messages that are syntactically correct
but not allowed to occur in some phase of the MM procedures
FT/MM/BI/ To check the IUT in response to invalid MM messages
FT/MM/TI/ To verify that the IUT MM timers are with correct values and the IUT is reacting properly
to the expiry of a timer
FT/ME/ To check the behaviour of the LLME of the IUT
ETSI
11 ETSI EN 300 494-3 V1.3.1 (2001-04)
Test Suite Structure
Suite Name: nwk_ft
Standards Ref: EN 300 444 [8]; EN 300 497-9 [26]
Profile ICS Ref: ETS 300 474-2 [28]
Profile IXIT Ref: EN 300 494-3 (the present document)
Test Method:remote
Comments:
Test Group Reference Test Group Objective
FT/ME/IT/ To check that LLME of the IUT provides sufficient conformance for possible
interconnection without trying to perform thorough testing
FT/ME/CA/ Limited testing that the observable capabilities of the LLME of the IUT are in accordance
with the static conformance requirements and the additional capabilities claimed in the
PROFILE ICS/PROFILE IXIT
FT/ME/BV/ To test the LLME of the IUT in response to syntactically and contextual correct
behaviour of the test system
FT/LC/ To check the behaviour of the LCE of the IUT
FT/LC/IT/ To check that LCE of the IUT provides sufficient conformance for possible
interconnection without trying to perform thorough testing
FT/LC/CA/ Limited testing that the observable capabilities of the LCE of the IUT are in accordance
with the static conformance requirements and the additional capabilities claimed in the
PROFILE ICS/PROFILE IXIT
FT/LC/BV/ To test the LCE of the IUT in response to syntactically and contextual correct behaviour
of the test system
FT/LC/BV/LE/ To check the IUT's behaviour concerning the connection oriented link establishment
procedures
FT/LC/BV/LR/ To check the IUT's behaviour concerning the connection oriented link release
procedures
FT/LC/BI/ To check the IUT in response to invalid LCE messages
FT/LC/TI/ To verify that the IUT LCE timers are with correct values and the IUT is reacting
properly to the expiry of a timer
Detailed Comments:
The sub-sub-groups with identifiers FT/xx/IT/ and FT/xx/CA/ do not include their own test cases but only list an
appropriate selection of tests from the relevant sub-group with identifier FT/xx/.
4.1.2 Test case index
Table 2
Test Case Index
Test Group Test Case Id Description
Reference
FT/CC/BV/OC/ TC_FT_CC_BV_OC_01 Outgoing normal call; F-00 to F-10; piece-wise dialling
TC_FT_CC_BV_OC_06 Verify that the IUT can correctly establish a following
outgoing call from the LT when the LT has use SARI as the
means to lock to the IUT
FT/CC/BV/IC/ TC_FT_CC_BV_IC_01 Incoming call; F-00, F-06, F-07 to F-10
FT/CC/BV/CI/ TC_FT_CC_BV_CI_01 Incoming call; << Signal l >> either in {CC-SETUP} or in
{CC-INFO}
TC_FT_CC_BV_CI_02 Outgoing normal call; F-02; {CC-INFO], << Multi keypad >>,
"Go to pulse" handling
TC_FT_CC_BV_CI_03 Outgoing normal call; F-10; {CC_INFO},<< Multi keypad >>,
"Go to pulse" handling
TC_FT_CC_BV_CI_04 Outgoing normal call; F-02; {CC-INFO], << Multi keypad >>,
"dialling pause" handling
TC_FT_CC_BV_CI_05 Outgoing normal call; F-10; {CC-INFO], << Multi keypad >>,
"Dialling pause" handling
TC_FT_CC_BV_CI_06 Outgoing normal call; F-02; {CC-INFO], << Multi keypad >>,
"Go to DTMF defined tone length" handling
TC_FT_CC_BV_CI_07 Outgoing normal call; F-10; {CC-INFO], << Multi keypad >>,
"Go to DTMF defined tone length" handling
TC_FT_CC_BV_CI_08 Outgoing normal call; F-02; {CC-INFO], << Multi keypad >>,
"Go to DTMF infinite tone length" handling
TC_FT_CC_BV_CI_09 Outgoing normal call; F-10; {CC-INFO], << Multi keypad >>,
"Go to DTMF infinite tone length" handling
ETSI
12 ETSI EN 300 494-3 V1.3.1 (2001-04)
Test Case Index
Test Group Test Case Id Description
Reference
TC_FT_CC_BV_CI_10 Outgoing normal call; F-10; {CC-INFO], << Multi keypad >>,
"0-9, star, hash mark" handling
FT/CC/BV/CR/ TC_FT_CC_BV_CR_01 Outgoing normal call; F-02; IUT initiated normal release
TC_FT_CC_BV_CR_02 F-10; IUT initiated normal release
TC_FT_CC_BV_CR_03 Incoming call; F-07; IUT initiated normal release
TC_FT_CC_BV_CR_04 Outgoing call; F-02; PT initiated normal release
TC_FT_CC_BV_CR_05 F-10; PT initiated normal release
TC_FT_CC_BV_CR_06 Incoming call; F-07; PT initiated normal release
TC_FT_CC_BV_CR_07 Incoming call; F-07; PT initiated abnormal release
TC_FT_CC_BV_CR_08 F-10; PT initiated abnormal release
TC_FT_CC_BV_CR_09 Incoming call; F-06; PT initiated abnormal release
TC_FT_CC_BV_CR_10 F-10; PT initiated partial release
FT/CC/RS TC_FT_CC_RS_07 Incoming call; T-00; {CC-SETUP},
<< Calling party number >> provision (CLIP support)
FT/CC/BO/ TC_FT_CC_BO_01 F-02; unexpected {CC-SETUP}
TC_FT_CC_BO_02 F-19; receipt of {CC-RELEASE}; release collisions handling
FT/CC/BI/ TC_FT_CC_BI_01 F-00; {CC-SETUP} mandatory I.E. missing; answer upon with
{CC-RELEASE-COM]
TC_FT_CC_BI_02 F-00; {CC-SETUP} wrong mandatory I.E.; answer upon with
{CC-RELEASE-COM]
TC_FT_CC_BI_03 F-00; {CC-SETUP}-like message, non {CC-SETUP}
unrecognized message type; ignore
FT/CC/TI/ TC_FT_CC_TI_01 Outgoing call; F-02; timer F - < CC.01 > expiry
(-10 % margin); IUT sends {CC-RELEASE}
TC_FT_CC_TI_02 Outgoing call; F-02; restart of timer F - < CC.01 > on receipt
of {CC-INFO}
TC_FT_CC_TI_03 Outgoing call; F-19; timer F - < CC.02 > expiry
(-10 %margin); IUT sends {CC-RELEASE-COM}
TC_FT_CC_TI_04 Outgoing call; F-06; timer F - < CC.03 > expiry
(-10 %margin); IUT sends {CC-RELEASE-COM}
FT/MM/BV/ID/ TC_FT_MM_BV_ID_01 Identity request procedure; IUT initiated
FT/MM/BV/AU/ TC_FT_MM_BV_AU_01 Authentication of PT; PT has no stored ZAP value and
service class info
TC_FT_MM_BV_AU_02 Authentication of PT; ZAP increment; PT has stored ZAP
value and service class info; PT authenticates FT before
answering
TC_FT_MM_BV_AU_03 Authentication of user; PT has no stored ZAP value and
service class info
TC_FT_MM_BV_AU_04 Authentication of FT
TC_FT_MM_BV_AU_05 Authentication of FT; Unsupported key requested; IUT rejects
TC_FT_MM_BV_AU_06 Authentication of PT; store DCK; PT has no stored ZAP value
and service class info
FT/MM/BV/LO/ TC_FT_MM_BV_LO_01 Location registration; a38 = 1 at locking and at the beginning
of the procedure; request with IPUI
TC_FT_MM_BV_LO_02 Location registration; a38 = 1 at locking and at the beginning
of the procedure; request with unknown IPUI; reject
TC_FT_MM_BV_LO_03 Location registration; a38 = 1 at locking and at the beginning
of the procedure; request with IPUI; IUT assigns TPUI
TC_FT_MM_BV_LO_05 Location update; a38 = 1 at locking; Location reg started
upon 1st {MM-INFO-SUGGEST}
TC_FT_MM_BV_LO_06 Location registration; a38 = 1 at locking; a38 = 0 at the
beginning of the procedure; request with IPUI
TC_FT_MM_BV_LO_07 Location update; a38 = 1 at locking; Location reg started
upon 2nd {MM-INFO-SUGGEST}
FT/MM/BV/AR/ TC_FT_MM_BV_AR_01 Obtain access rights; both sides use AC indication; IUT
sends the whole PARK
TC_FT_MM_BV_AR_02 Obtain access rights; service class assign
TC_FT_MM_BV_AR_03 Terminate access rights; IUT(FT) initiated; PT authenticates
FT
TC_FT_MM_BV_AR_06 Obtain access rights; both sides use UAK indication; IUT
sends the whole PARK
TC_FT_MM_BV_AR_07 Obtain access rights; ZAP value assign
ETSI
13 ETSI EN 300 494-3 V1.3.1 (2001-04)
Test Case Index
Test Group Test Case Id Description
Reference
FT/MM/BV/KA/ TC_FT_MM_BV_KA_01 Key allocate; IUT initiated
TC_FT_MM_BV_KA_02 Key allocate; IUT initiated; "implicit PT authentication" failure;
IUT rejects
FT/MM/BV/CH/ TC_FT_MM_BV_CH_01 Cipher switching; PT initiated; "cipher-off" to "cipher-on"
TC_FT_MM_BV_CH_02 Cipher switching; PT initiated; "cipher-on" to "cipher-off"
TC_FT_MM_BV_CH_03 Cipher switching; IUT(FT) initiated; "cipher-off" to "cipher-on"
TC_FT_MM_BV_CH_04 Cipher switching; IUT(FT) initiated; "cipher-on" to "cipher-off"
TC_FT_MM_BV_CH_05 Cipher switching; PT initiated with "unsupported cipher key";
IUT rejects
TC_FT_MM_BV_CH_08 Cipher switching; IUT(FT) initiated; "cipher-off" to "cipher-on"
fails
TC_FT_MM_BV_CH_09 Cipher switching; PT initiated; "cipher-off" to "cipher-on" fails
TC_FT_MM_BV_CH_10 Cipher switching; PT initiated; "cipher-off" to "cipher-on" and
intercell handover
TC_FT_MM_BV_CH_11 Cipher switching; PT initiated; "cipher-off" to "cipher-on" and
intracell handover
TC_FT_MM_BV_CH_12 Cipher switching; IUT(FT) initiated; "cipher-off" to "cipher-on"
and intercell handover
TC_FT_MM_BV_CH_13 Cipher switching; PT initiated; "cipher-on" to "cipher-off" fails
TC_FT_MM_BV_CH_14 Cipher switching; IUT(FT) initiated; "cipher-off" to "cipher-on"
and intracell handover
TC_FT_MM_BV_CH_15 Cipher switching; IUT(FT) initiated; "cipher-on" to "cipher-off"
fails
FT/MM/BO/ TC_FT_MM_BO_01 Cipher switching; IUT(FT) initiated; ignoring unexpected
{IDENTITY-REPLY}
FT/MM/BI TC_FT_MM_BI_02 Obtain access rights; {ACCESS-RIGHTS-REQUEST}
missing<< Authtype>>; IUTsends
{ACCESS-RIGHTS-REJECT}
TC_FT_MM_BI_03 Obtain access rights; {ACCESS-RIGHTS-REQUEST} with
<< Auth type >> exceeding the max. allowed length; IUT
sends {ACCESS-RIGHTS-REJECT}
FT/MM/TI/ TC_FT_MM_TI_01 Identity request; timer F - < MM_ident.2 > expiry
(-10 % margin)
TC_FT_MM_TI_02 Authentication of PT; timer F - < MM_auth.1 > expiry
(-10 % margin)
TC_FT_MM_TI_03 Authentication of user; timer F - < MM_auth.2 > expiry
(-10 % margin)
TC_FT_MM_TI_04 Terminate access rights; IUT (FT) initiated; timer
F - < MM_access.2 > expiry (-10 % margin)
TC_FT_MM_TI_05 Key allocation; timer F - < MM_key.1 > expiry (-10 % margin)
TC_FT_MM_TI_06 Cipher switching; IUT (FT) initiated; timer
F - < MM_cipher.1 > expiry (margin: -20 %)
TC_FT_MM_TI_07 Location registration with TPUI assignment;
timer F - < MM_ident.1 > expiry (+5 % margin)
FT/ME/BV/ TC_FT_ME_BV_01 Incoming call and authentication of FT handled in parallel
TC_FT_ME_BV_02 Authentication of user interrupted by Authentication of FT
TC_FT_ME_BV_03 CC call and location registration in parallel
FT/LC/BV/LE/ TC_FT_LC_BV_LE_01 Indirect IUT (FT) link establishment procedure; correct PT
answer
TC_FT_LC_BV_LE_02 Indirect IUT (FT) link establishment procedure;
{LCE-PAGE-RESPONSE} with mismatching IPUI; IUT rejects
and release the link
TC_FT_LC_BV_LE_03 Direct PT initiated link establishment procedure
FT/LC/BV/LR/ TC_FT_LC_BV_LR_01 Link exists; PT initiated "normal" link release
TC_FT_LC_BV_LR_02 Link exists; MM entity ceases to use the link; no other entity
uses the link; IUT maintains the link < LCE.02 > time
TC_FT_LC_BV_LR_03 Link exists; CC call is terminated; FT initiated link release
TC_FT_LC_BV_LR_04 Link exists; CC entity ceases to use the link partial release
agreed; no other entity uses the link; IUT maintains the link
time
FT/LC/BI/ TC_FT_LC_BI_01 Protocol discriminator value error-unsupported service; IUT
ignores
TC_FT_LC_BI_04 {AUTH-REQUEST} with illegal transaction id.; ignore
ETSI
14 ETSI EN 300 494-3 V1.3.1 (2001-04)
Test Case Index
Test Group Test Case Id Description
Reference
TC_FT_LC_BI_07 F-10; link fails; IUT clears the call
FT/LC/TI/ TC_FT_LC_TI_02 MM ceases to use the link; no other entity uses the link; timer
< LCE.02 > expiry (allowed period: (TSPX_lce_02-1 000) ms
to 10 500 ms)
Detailed Comments:
The FT is the IUT.
4.2 Data Link Control (DLC) layer
This clause includes lists of the test groups and the abstract test cases relevant for GAP PTS-DLC layer FT derived
from EN 300 497-5 [22].
4.2.1 Test suite structure
Table 3
Test Suite Structure
Suite Name: DLC
Standards Ref: EN 300 444 [8]; EN 300 497-5 [22]
Profile ICS Ref: ETS 300 474-2 [28]
Profile IXIT Ref: EN 300 494-3 (the present document)
Test Method:remote
Comments:
Test Group Reference Te
...