Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1 180 MPa

This standard specifies the requirements relating to:
Steel FE-PL1505 (15CrMoV6)
Air melted
Hardened and tempered
Sheet and strip
0,5 mm ≤ a ≤ 6 mm
980 MPa ≤ Rm ≤ 1 180 MPa
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PL1505 (15CrMoV6) - Lufterschmolzen - Gehärtet und angelassen - Bleche und Bänder - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1 180 MPa

Diese Norm legt die Anforderungen an
Stahl FE PL1505 (15CrMoV6)
Lufterschmolzen
Gehärtet und angelassen
Bleche und Bänder
0,5 mm ≤ a ≤ 6 mm
980 MPa ≤ Rm ≤ 1 180 MPa
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PL1505 (15CrMoV6) - Élaboré à l'air - Trempé et revenu - Tôles et bandes - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1 180 MPa

Aeronavtika - Jeklo FE-PL1505 (15CrMoV6) - Taljeno - Utrjeno in mehko žarjeno - Pločevina in trakovi - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1180 MPa

General Information

Status
Withdrawn
Publication Date
31-Mar-2009
Withdrawal Date
07-Jan-2024
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
05-Jan-2024
Due Date
28-Jan-2024
Completion Date
08-Jan-2024

Relations

Buy Standard

Standard
EN 3526:2009
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.D49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 3526:2007SIST EN 3526:2009en,de01-maj-2009SIST EN 3526:2009SLOVENSKI
STANDARD



SIST EN 3526:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3526
March 2007 ICS 49.025.10 English Version
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm -980 MPa ≤ Rm ≤ 1 180 MPa
Série aérospatiale - Acier FE-PL1505 (15CrMoV6) - Élaboré à l'air - Trempé et revenu - Tôles et bandes - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1 180 MPa
Luft- und Raumfahrt - Stahl FE-PL1505 (15CrMoV6) - Lufterschmolzen - Gehärtet und angelassen - Bleche und Bänder - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1 180 MPaThis European Standard was approved by CEN on 5 October 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3526:2007: ESIST EN 3526:2009



EN 3526:2007 (E) 2 Foreword This document (EN 3526:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swed
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.