SIST EN 415-6:2007+A1:2010
(Main)Safety of packaging machines - Part 6: Pallet wrapping machines
Safety of packaging machines - Part 6: Pallet wrapping machines
This standard applies to the following groups of machines: - pallet banding machines; - stretch film pallet wrapping machines; - stretch film hood application machines; - mobile stretch film wrapping machines; - semi automatic self driving stretch film wrapping machines; - shrink film pallet wrapping machines; - shrink film hood application machines; - film removing machines; - shrinking systems; - sleeve wrapping machines for product greater than 400 mm in one direction; - product centralising machines. The individual machines are described in 3.2. This standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of pallet wrapping machines. The extents to which hazards, hazardous situations and events are covered are indicated in Clause 4. Exclusions This standard is not applicable to the following machines: - machines that were manufactured before the date of publication of this document by CEN; - pallet strapping machines and destrapping machines. These machines are within the scope of prEN 415-8 - conveying systems that connect packaging machines with each other, but includes conveying systems that are part of the machines; This standard does not consider the following hazards: - the use of pallet wrapping machines in potentially explosive atmospheres; - the health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject; - hazards that may be associated with electromagnetic emissions from pallet wrapping machines; - hazards that may be associated with decommissioning pallet wrapping machines.
Sicherheit von Verpackungsmaschinen - Teil 6: Paletteneinschlagmaschinen
Diese Norm behandelt folgende Maschinengruppen:
Palettenbanderoliermaschinen;
Palettenstretchfolieneinschlagmaschinen;
Stretchfolienhaubenüberziehmaschinen;
fahrbare Palettenstretchfolieneinschlagmaschinen;
halbautomatische selbstfahrende Palettenstretchfolieneinschlagmaschinen;
Palettenschrumpffolieneinschlagmaschinen;
Schrumpffolienhaubenüberziehmaschinen;
Folienabziehmaschinen;
Schrumpfsysteme;
Schrumpffolieneinschlagmaschinen für Produkte mit einer Größe von mehr als 400 mm in einer Richtung;
Ladungszentriermaschinen.
Die einzelnen Maschinenarten werden in 3.2 beschrieben.
Diese Norm beschreibt Sicherheitsanforderungen für Konstruktion, Bau, Installation, Inbetriebnahme, Betrieb,
Einstellung, Instandhaltung und Reinigung von Paletteneinschlagmaschinen.
Der Umfang der behandelten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse ist in
Abschnitt 4 angegeben.
Sécurité des machines d'emballage - Partie 6 : Machines d'emballage de palettes
La présente norme s’applique aux groupes de machines suivants :
- les banderoleuses de palettes ;
- les fardeleuses de palettes par film étirable ;
- les housseuses à film étirable ;
- les fardeleuses mobiles à film étirable ;
- les fardeleuses automotrices semi-automatiques à film étirable ;
- les fardeleuses de palettes par film rétractable ;
- les housseuses à tube rétractable ;
- les ôteurs de films ;
- les systèmes de rétreint ;
- les banderoleuses par film rétractable pour produits mesurant plus de 400 mm dans la même direction ;
- les machines à centrer les produits.
Chaque machine est décrite en 3.2.
La présente Norme traite des exigences de sécurité en matière de conception, de construction, d’installation, de mise
en service, de fonctionnement, de réglage, de maintenance et de nettoyage des machines d’emballage de palettes.
L’étendue des phénomènes dangereux, situations et événements dangereux couverts est indiquée à l’Article 4 du
présent document.
Exclusions
La présente norme ne s’applique pas aux machines suivantes :
- les machines qui ont été fabriquées avant la date de publication du présent document par le CEN ;
- les cercleuses et les décercleuses ; ces machines sont dans le domaine d’application du prEN 415-8 ;
- les dispositifs de convoyage qui relient les machines d’emballage entre elles, à l’exception des dispositifs de
convoyage intégrés aux machines.
EN 415-6:2006+A1:2009 (F)
8
La présente Norme ne traite pas des phénomènes dangereux suivants :
- l’utilisation des machines d’emballage de palettes dans les atmosphères explosibles ;
- les risques pour la santé, la sécurité ou l’hygiène liés aux produits éventuellement utilisés pour les machines, tout
en comportant néanmoins des conseils d’ordre général sur le sujet ;
- les risques pouvant être liés aux émissions électromagnétiques des machines d’emballage de palettes ;
- les risques pouvant être liés au démantèlement des machines d’emballage de palettes.
Pakirne naprave - Varnost pakirnih naprav - 6. del: Zavijalni stroji
Ta standard se nanaša na naslednje skupine naprav: - stroji za povijanje, - stroji za zavijanje z raztegljivo folijo, - stroji za nameščanje ponjave iz raztegljive folije, - mobilni stroji za zavijanje z raztegljivo folijo, - pol avtomatski samo vozni stroji za zavijanje z raztegljivo folijo, - stroji za zavijanje z vakuumsko folijo, - stroji za nameščanje ponjave iz vakumske folije; - stroji za odstranjevanje folije, - vakumski sistemi, - stroji za rokavno zavijanje za proizvode večje od 400 mm v eni smeri, - stroji za centralizacijo proizvodov. Posamezni stroji so opisani v točki 3.2. Ta standard se ukvarja z varnostnimi zahtevami za načrtovanje strojev, izgradnjo, namestitvijo, začetkom obratovanja, delovanjem, prilagajanjem, vzdrževanjem in čiščenjem zavijalnih strojev. V Klavzuli 4 je navedeno, do katere mere so zajete nevarnosti, nevarna stanja in dogodki. Izjeme: Ta standard ne velja za naslednje stroje: - stroje, ki so bili izdelanni pred dnevom objave tega dokumenta z strani CEN; - stroje za povezovanje in stroje za razvezovanje. Ti stroji so znotraj področja uporabe prEN 415-8 – sistemi za prenos, ki povezujejo pakirne stroje med sabo, vendar vsebujejo prenosne sisteme, ki so del stroja. Ta standard ne upošteva naslednjih nevarnosti: - uporaba zavijalnih strojev v potencialno eksplozivnih atmosferah; - nevarnosti zdravja, varnosti in higiene povezane z proizvodi, ki jih stroji obdelujejo, ampak ne vsebujejo splošnih nasvetov na to temo; - nevarnosti, ki so lahko povezane z elektromagnetnimi emisijami iz zavijalnih strojev; - nevarnosti, ki so lahko povezane z razgradnjo zavijalnih strojev.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pakirne naprave - Varnost pakirnih naprav - 6. del: Zavijalni strojiSicherheit von Verpackungsmaschinen - Teil 6: PaletteneinschlagmaschinenSécurité des machines d'emballage - Partie 6 : Machines d'emballage de palettesSafety of packaging machines - Part 6: Pallet wrapping machines55.200Pakirni strojiPackaging machineryICS:Ta slovenski standard je istoveten z:EN 415-6:2006+A1:2009SIST EN 415-6:2007+A1:2010en,fr01-februar-2010SIST EN 415-6:2007+A1:2010SLOVENSKI
STANDARD
SIST EN 415-6:2007+A1:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 415-6:2006+A1
October 2009 ICS 55.200 Supersedes EN 415-6:2006English Version
Safety of packaging machines - Part 6: Pallet wrapping machines
Sécurité des machines d'emballage - Partie 6 : Machines d'emballage de palettes
Sicherheit von Verpackungsmaschinen - Teil 6: Paletteneinschlagmaschinen This European Standard was approved by CEN on 4 September 2006 and includes Amendment 1 approved by CEN on 7 September 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 415-6:2006+A1:2009: ESIST EN 415-6:2007+A1:2010
EN 415-6:2006+A1:2009 (E) 2 Contents Page Foreword .6Introduction .71Scope .82Normative references .93Terms and definitions . 113.1Definition of terms . 113.2Description of pallet wrapping machines . 124List of hazards on pallet wrapping machines . 284.1General . 284.2General pallet wrapping machine hazards . 294.3Specific hazards on pallet wrapping machines excluding shrinking systems and auxiliary machines . 334.4Specific hazards on pallet shrinking systems . 374.5Auxiliary machines . 395Safety requirements and measures for pallet wrapping machines . 405.1General . 405.2General requirements for pallet wrapping machines. 405.3Safety requirements for pallet wrapping machines . 535.4Safety requirements for shrinking systems . 595.5Auxiliary machines . 646Verification of safety requirements and measures . 646.1General . 646.2Visual inspections with the machine stopped . 656.3Measurements with the machine stopped . 656.4Visual inspections with the machine running . 656.5Measurements with the machine running . 666.6Verification procedures . 667Information for use . 687.1Marking . 687.2Signals and warning signs . 697.3Instruction handbook . 69Annex A (normative)
Noise test code for pallet wrapping machines - grade of accuracy 2 and 3 . 71A.1Scope . 71A.2Definitions . 71A.3Determination of the emission sound pressure level at work station . 71A.4Determination of the sound power level . 72A.5Installation and mounting conditions . 72A.6Operating conditions . 72A.7Measurement uncertainties . 76A.8Information to be recorded . 76A.9Information to be reported . 76A.10Declaration and verification of noise emission values . 77Annex B (normative)
Methods of safeguarding large apertures . 79B.1Interlocked guards with guard locking . 79B.2Fixed and interlocked guards with ESPE . 80B.3Positioning of ESPE . 82SIST EN 415-6:2007+A1:2010
EN 415-6:2006+A1:2009 (E) 3 Annex C (normative)
ESPE-Muting . 84Annex D (informative)
List of possibly helpful standards for gas equipment . 86Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 87Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 88Bibliography . 89
SIST EN 415-6:2007+A1:2010
EN 415-6:2006+A1:2009 (E) 4 Figures Figure 1 — Principle of rotary table machine. 13 Figure 2 — Manual rotary table machine. 13 Figure 3 — Automatic rotary table machine . 14 Figure 4 — Semiautomatic rotary arm machine . 15 Figure 5 — Fully automatic rotary arm machine . 16 Figure 6 — Ring machine – Principle of operation . 17 Figure 7 — Semi automatic self driving pallet stretch wrapping machine . 17 Figure 8 — Mobile pallet stretch wrapping machine . 18 Figure 9 — Curtain stretching machine – Principle of operation . 18 Figure 10 — Hood stretching machine . 19 Figure 11 — Spiral pallet wrapping machine . 21 Figure 12 — Vertical hood application machine . 22 Figure 13 — Parachute hood application machine . 23 Figure 14 — Shrinking frame . 24 Figure 15 — Chamber shrinking oven with electric heating device . 25 Figure 16 — Continuous shrinking oven using thermal combustion heating . 26 Figure 17 — Shrinking column using thermal combustion . 27 Figure 18 — Product centralizing machine . 28 Figure 19 — Semiautomatic or manual rotary table machines: crushing, shearing and drawing-in hazard location . 34 Figure 20 — Warning sign "Caution, hot surface" . 47 Figure 21 — Semiautomatic or manual rotary table machines with apertures in the table . 55 Figure 22 — Methods for safeguarding of film rollers . 56 Figure B.1 — Interlocked guards with guard locking . 79 Figure B.2 — Example of a combination of fixed and interlocked guards and ESPE . 80 Figure B.3 — Dynamic cell positioning . 82 Figure B.4 — Positioning of ESPE . 83 Figure C.1 — Positioning of muting ESPE . 85
SIST EN 415-6:2007+A1:2010
EN 415-6:2006+A1:2009 (E) 5 Tables Table 1 —Degree of protection for dusty environments . 45 Table 2 — Degree of protection for different cleaning methods using water . 45 Table 3 — Verification procedures for safety requirements identified in 5.2 and 5.3 . 67 Table 3 (continued) . 68 Table A.1 — Specification of K3 (based on K2) . 72 Table A.2 — Typical workstations for the determination of the emission sound pressure level and operating conditions for all noise emission measurements . 73 Table A.3 — Expected standard deviations of reproducibility σR . 76 Table A.4 — Uncertainties expected . 77 Table A.5 — Example of a noise emission declaration (The values in this table are examples) . 78
SIST EN 415-6:2007+A1:2010
EN 415-6:2006+A1:2009 (E) 6 Foreword This document (EN 415-6:2006+A1:2009) has been prepared by Technical Committee CEN/TC 146 “Packaging machines - Safety”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2010, and conflicting national standards shall be withdrawn at the latest by April 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-09-07. This document supersedes EN 415-6:2006. The start and finish of text introduced or altered by amendment is indicated in the text by tags !". This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document." Other standards produced by this Technical Committee are: EN 415, Safety of packaging machines; Part 1: Terminology and classification of packaging machines and associated equipment Part 2: Pre-formed rigid container packaging machines Part 3: Form, fill and seal machines Part 4: Palletizers and depalletizers Part 5: Wrapping machines Part 7: Group and secondary packaging machines Part 8: Strapping machines !Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3" According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 415-6:2007+A1:2010
EN 415-6:2006+A1:2009 (E) 7 Introduction Pallet wrapping machines are used extensively in Europe, in an increasingly wide range of industries. They contain several significant hazards and have the potential to cause serious injury. Pallet wrapping machines fulfil the following major tasks: securing of palletised or unpalletised loads to prevent them collapsing and displacing during transport, handling, storage; pooling of loads and parts to form loads suitable for transport; protection against external influences; conditional protection against theft. This document is a type C standard as defined in the Introduction of EN ISO 12100-1:2003. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this standard.
When provisions of this type C standard are different from those, which are stated in type A or B standards, the provisions of this type C standard take precedence. SIST EN 415-6:2007+A1:2010
EN 415-6:2006+A1:2009 (E) 8
1 Scope This standard applies to the following groups of machines: pallet banding machines; stretch film pallet wrapping machines; stretch film hood application machines; mobile stretch film wrapping machines; semi automatic self driving stretch film wrapping machines; shrink film pallet wrapping machines; shrink film hood application machines; film removing machines; shrinking systems; sleeve wrapping machines for product greater than 400 mm in one direction; product centralising machines. The individual machines are described in 3.2.
This standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of pallet wrapping machines. The extents to which hazards, hazardous situations and events are covered are indicated in Clause 4. Exclusions This standard is not applicable to the following machines: machines that were manufactured before the date of publication of this document by CEN; pallet strapping machines and destrapping machines. These machines are within the scope of prEN 415-8 conveying systems that connect packaging machines with each other, but includes conveying systems that are part of the machines; This standard does not consider the following hazards: the use of pallet wrapping machines in potentially explosive atmospheres; the health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject; hazards that may be associated with electromagnetic emissions from pallet wrapping machines;
hazards that may be associated with decommissioning pallet wrapping machines. SIST EN 415-6:2007+A1:2010
EN 415-6:2006+A1:2009 (E) 9 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery — Safety distance to prevent danger zones being reached by the upper limbs EN 349:1993, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body EN 415-1:2000, Packaging machines safety — Part 1: Terminology and classification of packaging machines and associated equipment EN 418, Safety of machinery — Emergency stop equipment, functional aspects - Principles for design EN 563, Safety of machinery — Temperatures of touchable surfaces — Ergonomics data to establish temperature limit values for hot surfaces EN 574:1996, Safety of machinery — Two-hand control devices — Functional aspects — Principles for design EN 614-1, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles EN 619, Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of unit loads EN 626-1, Safety of machinery — Reduction of risks to health from hazardous substances emitted by machinery — Part 1: Principles and specifications for machinery manufacturers EN 626-2, Safety of machinery — reduction of risk to health from hazardous substances emitted by machinery — Part 2: Methodology leading to verification procedures EN 811, Safety of machinery — Safety distances to prevent danger zones being reached by the lower limbs EN 894-1, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators EN 894-2, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 2: Displays EN 894-3, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 3: Control actuators EN 953:1997, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery — Safety related parts of control systems — Part 1: General principles for design EN 982:1996, Safety of machinery — Safety requirements for fluid power systems and their components - Hydraulics EN 983:1996, Safety of machinery — Safety requirements for fluid power systems and their components - Pneumatics EN 999, Safety of machinery — The positioning of protective equipment in respect of approach speeds of parts of the human body SIST EN 415-6:2007+A1:2010
EN 415-6:2006+A1:2009 (E) 10 EN 1005-3, Safety of machinery — Human physical performance — Part 3: Recommended force limits for machinery operation EN 1037, Safety of machinery — Prevention of unexpected start-up EN 1050, Safety of machinery — Principles for risk assessment EN 1088:1995, Safety of machinery — Interlocking devices associated with guards — Principles for design and selection EN 1672-2:2005, Food processing machinery — Basic concepts — Part 2: Hygiene requirements EN 1760-1, Safety of machinery — Pressure sensitive protective devices — Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors EN 1760-2, Safety of machinery — Pressure sensitive protective devices — Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars EN 13478, Safety of machinery — Fire prevention and protection EN 60204-1:1997, Safety of machinery — Electrical equipment of machines — Part 1: General requirements
EN 60529, Degrees of protection provided by enclosures (IP code) (IEC 60529:1989) EN 61310-1:1995, Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, auditory and tactile signals (IEC 61310-1:1995) EN 61310-3, Safety of machinery — Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators (IEC 61310-3:1999) EN 61496-1:2004, Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests (IEC 61496-1:2004, modified) EN 61508-1, Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 1: General requirements (IEC 61508-1:1998 + Corrigendum 1999) EN 61508-2, Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (IEC 61508-2:2000) EN 61508-3, Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 3: Software requirements
EN 62061:2005, Safety of machinery — Functional safety of safety-related electrical, electronic and programmable electronic control systems EN ISO 3744:1995, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) EN ISO 3746:1995, Acoustics — Determination of sound power levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995) EN ISO 3747:2000, Acoustics — Determination of sound power levels of noise sources using sound pressure — Comparison method for use in situ (ISO 3747:2000) EN ISO 4871:1996, Acoustics — Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) SIST EN 415-6:2007+A1:2010
EN 415-6:2006+A1:2009 (E) 11 EN ISO 9614-2:1996, Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning (ISO 9614-2:1996) EN ISO 11201, Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) EN ISO 11202, Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Survey method in situ (ISO 11202:1995) EN ISO 11204:1995, Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Method requiring environmental corrections (ISO 11204:1995) EN ISO 12001:1996, Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code (ISO 12001:1996) EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles (ISO 12100-2:2003) EN ISO 14122-1:2001, Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001) EN ISO 14122-2, Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways (ISO 14122-2:2001) EN ISO 14122-3, Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001) EN ISO 14122-4, Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders (ISO 14122-4:2004) ISO 7000, Graphical symbols for use on equipment — Index and synopsis IEC 61496-3, Safety of machinery — Electro-sensitive protective equipment — Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) (IEC 61496-3:2001) 3 Terms and definitions For the purposes of this document the terms and definitions given in Clause 3 of EN ISO 12100-1:2003, and EN 415-1:2000 and the following apply.
3.1 Definition of terms 3.1.1 product article or articles, with or without pallet, that are handled in the pallet wrapping machine 3.1.2 pack assembly of product and packaging materials produced by a pallet wrapping machine SIST EN 415-6:2007+A1:2010
EN 415-6:2006+A1:2009 (E) 12 3.1.3 packaging material material used to secure a product, e.g. stretch film 3.1.4 flexible packaging material relatively thin paper, plastic film or flexible laminate 3.1.5 stretch film flexible elastic plastic film which can be pulled tightly around a product to form an envelope. It may stick to itself on contact or require heat sealing 3.1.6 stretch wrapping wrapping process in which the stretch film is stretched and wrapped around the product and sealed under tension 3.1.7 thermoplastic film, shrink film plastic film which shrinks when heated 3.1.8 film reel, packaging material reel continuous sheet of paper, plastic film, metal foil or flexible laminate wound on a cylindrical core 3.1.9 film clamp device to hold the film at the product for the first wrap. Also called film fixture 3.1.10 manual operation machine functions or modes where the only power source is directly applied manual effort 3.1.11 top sheet piece of packaging material which is applied to the top of the product e.g. to achieve water and dust protection 3.2 Description of pallet wrapping machines 3.2.1 General Pallet wrapping machines are machines listed in Clause 1 that secure product for transport and other purposes e.g. by applying packaging material or shrinking shrink film. Many of the machines deal with palletised products, therefore they are called, e.g.: pallet shrink wrapping machine, pallet shrink oven (see 3.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.