SIST EN 14035-29:2004
(Main)Fireworks - Part 29: Serpents - Specification and test methods
Fireworks - Part 29: Serpents - Specification and test methods
This document specifies requirements for the construction, performance, primary packaging and labelling of serpents and the corresponding test methods. It is applicable to fireworks which are classified as serpents in category 1 in EN 14035-2 and which are contained in a primary pack.
It is not applicable to serpents containing pyrotechnic composition that includes any of the following substances:
- arsenic or arsenic compounds;
- mixtures containing a mass fraction of chlorates greater than 80 %;
- mixtures of chlorates with metals;
- mixtures of chlorates with red phosphorus;
- mixtures of chlorates with potassium hexacyanoferrate(II);
- mixtures of chlorates with sulfur;
- mixtures of chlorates with sulfides;
- lead or lead compounds;
- mercury compounds;
- white phosphorus;
- picrates or picric acid;
- potassium chlorate with a mass fraction of bromates greater than 0,15 %;
- sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %;
- zirconium with a particle size of less than 40 mm.
NOTE In EN 14035-2, serpents are classified as follows:
- brief description: preformed shape of pyrotechnic composition with or without support;
- principal effect: generation of expanded residue.
Schemes for type testing of serpents and batch testing of serpents are specified in annex A and annex B respectively.
Feuerwerkskörper - Teil 29: Schlangen - Anforderungen und Prüfverfahren
Dieses Dokument legt Anforderungen an die Konstruktion, Funktion, kleinste Verpackungseinheit und Beschriftung von Schlangen und die entsprechenden Prüfverfahren fest. Es gilt für Feuerwerkskörper, die als Schlangen in die Kategorie 1 in der EN 14035-2 eingruppiert sind und die sich in einer Ursprungsverpackung befinden.
Es gilt nicht für Schlangen, die pyrotechnischen Satz enthalten, in dem eine der nachfolgend aufgeführten Substanzen enthalten ist:
Arsen und Arsenverbindungen,
Blei und Bleiverbindungen,
Kaliumchlorat mit einem Massenanteil an Bromaten von mehr als 0,15 %,
Mischungen mit einem Massenanteil an Chloraten von mehr als 80 %,
Mischungen von Chloraten mit Metallen,
Mischungen von Chloraten mit rotem Phosphor,
Mischungen von Chloraten mit Kaliumhexacyanoferrat(II),
Mischungen von Chloraten mit Schwefel,
Mischungen von Chloraten mit Sulfiden,
Pikrate und Pikrinsäure,
Quecksilberverbindungen,
weißer Phosphor,
Schwefel mit einem Massenanteil an freier Säure (angegeben als H2SO4) von mehr als 0,002 %,
Zirkon mit einer Korngröße von weniger als 40 mm.
ANMERKUNG In EN 14035-2 sind Schlangen wie folgt klassifiziert:
- Kurzbeschreibung: Vorgeformter pyrotechnischer Satz, mit oder ohne Halterung;
- Hauptwirkungen: Erzeugung voluminöser Schlacken.
Übersichten für die Typ-Prüfung von Schlangen und die Los-Prüfung von Schlangen sind in Anhang A beziehungsweise Anhang B angegeben.
Artifices de divertissement - Partie 29: Serpents - Spécifications et méthodes d'essai
Le présent document spécifie les exigences de construction, les performances, le conditionnement primaire et l'étiquetage des serpents, ainsi que les méthodes d'essai correspondantes. Elle s'applique aux artifices de divertissement classés comme serpents de catégorie 1 dans l'EN 14035-2 et conditionnés dans un emballage primaire ou un assortiment.
Elle ne s'applique pas aux serpents dont la composition pyrotechnique comprend l'une des substances suivantes :
3 arsenic ou composés d'arsenic ;
3 mélanges contenant une fraction en masse de chlorates supérieure a 80 % ;
3 mélanges de chlorates et de métaux ;
3 mélanges de chlorates et de phosphore rouge ;
3 mélanges de chlorates et d'hexacyanoferrate (II) de potassium ;
3 mélanges de chlorates et de soufre ;
3 mélanges de chlorates et de sulfures ;
3 plomb ou composés de plomb ;
3 composés de mercure ;
3 phosphore blanc ;
3 picrates ou acide picrique ;
3 chlorate de potassium contenant une fraction en masse de bromates supérieure a 0,15 % ;
3 soufre présentant une acidité, exprimée en fraction en masse d'acide sulfurique supérieure a 0,002 %;
3 zirconium ayant une taille de particule inférieure a 40 mm.
NOTE Dans la norme EN 14035-2, les serpents sont classés comme suit :
3 description abrégée : Forme de composition pyrotechnique préfabriquée avec ou sans support ;
3 effet principal : Génération de résidus en expansion.
Les schémas d'essais de type et d'essais de lot des serpents sont respectivement spécifiés aux Annexes A et B.
Ognjemet – 29. del: Kače – Specifikacija in preskusne metode
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fireworks - Part 29: Serpents - Specification and test methodsArtifices de divertissement - Partie 29: Serpents - Spécifications et méthodes d'essaiFeuerwerkskörper - Teil 29: Schlangen - Anforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 14035-29:2004SIST EN 14035-29:2004en71.100.30ICS:SLOVENSKI
STANDARDSIST EN 14035-29:200401-november-2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14035-29August 2004ICS 71.100.30English versionFireworks - Part 29: Serpents - Specification and test methodsArtifices de divertissement - Partie 29: Serpents -Spécifications et méthodes d'essaiFeuerwerkskörper - Teil 29: Schlangen - Anforderungenund PrüfverfahrenThis European Standard was approved by CEN on 18 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14035-29:2004: E
EN 14035-29:2004 (E) 2 Contents page Foreword.4 1 Scope.6 2 Normative references.7 3 Terms and definitions.7 4 Construction.7 4.1 Protection of initial fuse.7 4.2 Net explosive content.7 5 Performance.7 5.1 Initial fuse (if applicable).7 5.2 Ignition of serpent.7 5.3 Principal effect.8 5.4 Burning of pyrotechnic composition.8 5.5 Burning matter.8 5.6 Extinguishing of any flames.8 6 Primary pack.8 7 Minimum labelling requirements.8 7.1 General.8 7.2 Type name and category.8 7.3 Safety information.8 7.3.1 General.8 7.3.2 Serpents.9 7.4 Name, address and telephone number of manufacturer or distributor or importer.9 7.5 Reference to this standard.9 7.6 Printing.9 7.6.1 Labelling.9 7.6.2 Type size.9 7.7 Additional information on the primary pack.9 8 Test methods.10 8.1 Performance (type test and batch test).10 8.1.1 Test environment.10 8.1.2 Material.10 8.1.3 Apparatus.10 8.1.4 Procedure.10 8.2 Determination of net explosive content (type test).10 8.2.1 Apparatus.10 8.2.2 Procedure.11 8.3 Labelling (type test and batch test).11 Annex A (normative) Type testing.12 A.1 General.12 A.2 Number of serpents to be tested.12 A.3 Thermal conditioning.12 A.4 Number of primary packs to be examined.12 A.5 Test report.13 Annex B (normative) Batch testing.14 B.1 General.14 B.2 Sampling plans.14 B.3 Unit of product.14
EN 14035-29:2004 (E) 3 B.4 Nonconformities.14 B.5 Test report.15 B.6 Acceptance or rejection of a batch.15 B.6.1 General.15 B.6.2 Nonconforming units.15 B.6.3 Critical nonconforming units.15 B.6.4 Major nonconforming units.15 B.6.5 Minor nonconforming units.15 Annex C (normative) Specification for test paper.16 C.1 Requirements.16 C.2 Scorch test.16 C.2.1 Material.16 C.2.2 Apparatus.16 C.2.3 Test specimen.16 C.2.4 Procedure.16 Annex D (normative) Method for determination of smouldering rate of cigarette.18 Annex E (informative) A-Deviations.19
EN 14035-29:2004 (E) 4 Foreword This document (EN 14035-29:2004) has been prepared by Technical Committee CEN/TC 212 “Fireworks”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2005, and conflicting national standards shall be withdrawn at the latest by February 2005. This European Standard is one of a series of standards as listed below. EN 14035-1, Fireworks - Part 1: Terminology. EN 14035-2, Fireworks - Part 2: Categorisation. EN 14035-3, Fireworks - Part 3: Aerial wheels - Specification and test methods. EN 14035-4, Fireworks - Part 4: Bangers and banger batteries - Specification and test methods. prEN 14035-5, Fireworks - Part 5: Batteries and combinations - Specification and test methods. EN 14035-6, Fireworks - Part 6: Bengal flames - Specification and test methods. EN 14035-7, Fireworks - Part 7: Bengal matches - Specification and test methods. EN 14035-8, Fireworks - Part 8: Bengal sticks - Specification and test methods. EN 14035-9, Fireworks - Part 9: Crackling granules - Specification and test methods. EN 14035-10, Fireworks - Part 10: Double bangers - Specification and test methods. EN 14035-12, Fireworks - Part 12: Flash bangers and flash banger batteries - Specification and test methods. EN 14035-13, Fireworks - Part 13: Flash pellets - Specification and test methods. EN 14035-15, Fireworks - Part 15: Fountains - Specification and test methods. EN 14035-17, Fireworks - Part 17: Ground spinners - Specification and test methods. prEN 14035-18, Fireworks - Part 18: Hand-held fountains - Specification and test methods. EN 14035-19, Fireworks - Part 19: Hand-held sparklers - Specification and test methods. prEN 14035-20, Fireworks - Part 20: Jumping crackers - Specification and test methods. prEN 14035-21, Fireworks - Part 21: Jumping ground spinners - Specification and test methods. EN 14035-22, Fireworks - Part 22: Mines - Specification and test methods. EN 14035-23, Fireworks - Part 23: Non-hand-held sparklers - Specification and test methods. EN 14035-24, Fireworks - Part 24: Novelty matches - Specification and test methods.
EN 14035-29:2004 (E) 5 prEN 14035-25, Fireworks - Part 25: Party poppers - Specification and test methods. EN 14035-27, Fireworks - Part 27: Rockets - Specification and test methods. EN 14035-28, Fireworks - Part 28: Roman candles - Specification and test methods. EN 14035-29, Fireworks - Part 29: Serpents - Specification and test methods. prEN 14035-31, Fireworks - Part 31: Shell-in-mortars - Specification and test methods. prEN 14035-32, Fireworks - Part 32: Snaps - Specification and test methods. prEN 14035-33, Fireworks - Part 33: Spinners - Specification and test methods. EN 14035-34, Fireworks - Part 34: Table bombs - Specification and test methods. prEN 14035-35, Fireworks - Part 35: Throwdowns - Specification and test methods. EN 14035-36, Fireworks - Part 36: Wheels - Specification and test methods. prEN 14035-37, Fireworks - Part 37: Whistlers - Specification and test methods. prEN 14035-38, Fireworks - Part 38: Shot tubes - Specification and test methods. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 14035-29:2004 (E) 6 1 Scope This document specifies requirements for the construction, performance, primary packaging and labelling of serpents and the corresponding test methods. It is applicable to fireworks which are classified as serpents in category 1 in EN 14035-2 and which are contained in a primary pack. It is not applicable to serpents containing pyrotechnic composition that includes any of the following substances: — arsenic or arsenic compounds; — mixtures containing a mass fraction of chlorates greater than 80 %; — mixtures of chlorates with metals; — mixtures of chlorates with red phosphorus; — mixtures of chlorates with potassium hexacyanoferrate(II); — mixtures of chlorates with sulfur; — mixtures of chlorates with sulfides; — lead or lead compounds; — mercury compounds; — white phosphorus; — picrates or picric acid; — potassium chlorate with a mass fraction of bromates greater than 0,15 %; — sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %; — zirconium with a particle size of less than 40 µm. NOTE In EN 14035-2, serpents are classified as follows: — brief description: preformed shape of pyrotechnic composition with or without support; — principal effect: generation of expanded residue. Schemes for type testing of serpents and batch testing of serpents are specified in annex A and annex B respectively.
EN 14035-29:2004 (E) 7 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 14035-1:2003, Fireworks — Part 1: Terminology. EN 14035-2, Fireworks — Part 2: Categorisation. EN 20187; Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990). EN ISO 536, Paper and board - Determination of grammage (ISO 536:1995). ISO 2859-1, Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection. 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 14035-1:2003 apply. 4 Construction 4.1 Protection of initial fuse The serpent shall be contained in a primary pack conforming to 6. Conformity to this requirement shall be verified by visual examination. NOTE Some serpents do not have an initial fuse (they produce the effect immediately after ignition). 4.2
Net explosive content When determined in accordance with 8.2, a serpent shall have a net explosive content of not more than 3,0 g. 5 Performance 5.1 Initial fuse (if applicable) When tested in accordance with 8.1, the initial fuse shall ignite within 10 s and the ignition shall be visible. NOTE Some serpents do not have an initial fuse (they produce their effect immediately after ignition). 5.2 Ignition of serpent When tested in accordance with 8.1, a serpent shall ignite within 10 s and the ignition shall be visible.
EN 14035-29:2004 (E) 8 5.3 Principal effect When tested in accordance with 8.1,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.