SIST EN 62734:2015/A1:2020
(Amendment)Industrial networks - Wireless communication network and communication profiles - ISA 100.11a (IEC 62734:2014/A1:2019)
Industrial networks - Wireless communication network and communication profiles - ISA 100.11a (IEC 62734:2014/A1:2019)
Industrielle Kommunikationsnetze - Drahtlose Kommunikationsnetze und Kommunikationsprofile - ISA 100.11a (IEC 62734:2014/A1:2019)
Réseaux industriels - Réseau de communication sans fil et profils de communication - ISA 100.11a (IEC 62734:2014/A1:2019)
Industrijska omrežja - Brezžično komunikacijsko omrežje in komunikacijski profili - ISA 100.11a - Dopolnilo A1 (IEC 62734:2014/A1:2019)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62734:2015/A1:2020
01-marec-2020
Industrijska omrežja - Brezžično komunikacijsko omrežje in komunikacijski profili -
ISA 100.11a - Dopolnilo A1 (IEC 62734:2014/A1:2019)
Industrial networks - Wireless communication network and communication profiles - ISA
100.11a (IEC 62734:2014/A1:2019)
Industrielle Kommunikationsnetze - Drahtlose Kommunikationsnetze und
Kommunikationsprofile - ISA 100.11a (IEC 62734:2014/A1:2019)
Réseaux industriels - Réseau de communication sans fil et profils de communication -
ISA 100.11a (IEC 62734:2014/A1:2019)
Ta slovenski standard je istoveten z: EN 62734:2015/A1:2019
ICS:
25.040.01 Sistemi za avtomatizacijo v Industrial automation
industriji na splošno systems in general
33.040.40 Podatkovna komunikacijska Data communication
omrežja networks
35.100.01 Medsebojno povezovanje Open systems
odprtih sistemov na splošno interconnection in general
SIST EN 62734:2015/A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62734:2015/A1:2020
---------------------- Page: 2 ----------------------
SIST EN 62734:2015/A1:2020
EUROPEAN STANDARD EN 62734:2015/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2019
ICS 33.160.60; 33.170
English Version
Industrial networks - Wireless communication network and
communication profiles - ISA 100.11a
(IEC 62734:2014/A1:2019)
Réseaux industriels - Réseau de communication sans fil et Industrielle Kommunikationsnetze - Drahtlose
profils de communication - ISA 100.11a Kommunikationsnetze und Kommunikationsprofile - ISA
(IEC 62734:2014/A1:2019) 100.11a
(IEC 62734:2014/A1:2019)
This amendment A1 modifies the European Standard EN 62734:2015; it was approved by CENELEC on 2019-09-04. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62734:2015/A1:2019 E
---------------------- Page: 3 ----------------------
SIST EN 62734:2015/A1:2020
EN 62734:2015/A1:2019 (E)
European foreword
The text of document 65C/965/FDIS, future IEC 62734/A1, prepared by SC 65C "Industrial networks"
of IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 62734:2015/A1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-06-04
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-09-04
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62734:2014/A1:2019 was approved by CENELEC as a
European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 62734:2015/A1:2020
EN 62734:2015/A1:2019 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEEE 802.15.4 2016 IEEE Standard for Low-Rate Wireless Networks - -
3
---------------------- Page: 5 ----------------------
SIST EN 62734:2015/A1:2020
---------------------- Page: 6 ----------------------
SIST EN 62734:2015/A1:2020
IEC 62734
®
Edition 1.0 2019-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Industrial networks –
Wireless communication network and communication profiles – ISA 100.11a
Réseaux industriels –
Réseau de communication sans fil et profils de communication – ISA 100.11a
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.160.60; 33.170 ISBN 978-2-8322-7149-0
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 62734:2015/A1:2020
– 2 – IEC 62734:2014/AMD1:2019
© IEC 2019
FOREWORD
This amendment has been prepared by subcommittee 65C: Industrial networks, of IEC
technical committee 65: Industrial-process measurement, control and automation.
The text of this amendment is based on the following documents:
FDIS Report on voting
65C/965/FDIS 65C/970/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
___________
GENERAL REPLACEMENTS
Throughout the document, replace references to IEEE 802.15.4:2011 as follows.
Location Replace With
4.6.10.2.8 “IEEE 802.15.4:2011” “IEEE 802.15.4”
th
“IEEE 802.15.4e” “IEEE 802.15.4”
6.3.5.2, 6 dash
st
“IEEE 802.15.4:2011, 7.4.1” “IEEE 802.15.4-2015, 9.4.1”
7.3.1.2, 1 paragraph
th
“IEEE 802.15.4:2011, Table 58” “IEEE 802.15.4-2015, Table 9-6”
7.3.1.2, 4 paragraph
st
“IEEE 802.15.4:2011, 7.4.3” “IEEE 802.15.4-2015, 9.4.3”
7.3.2.3.2, 1 paragraph
st
“IEEE 802.15.4:2011, 7.3.2” “IEEE 802.15.4-2015, 9.3.2.1”
7.3.2.4.10, 1 bullet
7.3.2.5, step i), (4 times) “IEEE 802.15.4:2011, 7.3.4” “IEEE 802.15.4-2015, 9.3.4”
7.3.2.5, step i)1) “IEEE 802.15.4:2011, Table 58” “IEEE 802.15.4-2015, Table 9-6”
7.3.2.6, step f), (4 times) “IEEE 802.15.4:2011, 7.3.5” “IEEE 802.15.4-2015, 9.3.5”
7.3.2.6, step f)1) “IEEE 802.15.4:2011, Table 58” “IEEE 802.15.4-2015, Table 9-6”
7.3.2.6, step f)1) “IEEE 802.15.4:2011, 5.2.2.2.2” “IEEE 802.15.4-2015, 7.3.2.2
7.3.2.6, step f)2) “IEEE 802.15.4:2011, Table 57” “IEEE 802.15.4-2015, Table 9-5”
7.3.3.8, step i), (4 times) “IEEE 802.15.4:2011, 7.3.4” “IEEE 802.15.4-2015, 9.3.4”
7.3.3.8, step i)1) “IEEE 802.15.4:2011, Table 58” “IEEE 802.15.4-2015, Table 9-6”
7.3.3.9, step g), (4 times) “IEEE 802.15.4:2011, 7.3.5” “IEEE 802.15.4-2015, 9.3.5”
---------------------- Page: 8 ----------------------
SIST EN 62734:2015/A1:2020
IEC 62734:2014/AMD1:2019 – 3 –
© IEC 2019
Location Replace With
7.3.3.9, step g)1) “IEEE 802.15.4:2011, Table 58” “IEEE 802.15.4-2015, Table 9-6”
7.3.3.9, step g)1) “IEEE 802.15.4:2011, 5.2.2.2.2” “IEEE 802.15.4-2015, 7.3.2.2
7.3.3.9, step g)2) “IEEE 802.15.4:2011, Table 57” “IEEE 802.15.4-2015, Table 9-5”
rd
“IEEE 802.15.4:2011, 8.1.5” “IEEE 802.15.4-2015, 10.1.5”
8.2.2.5, 3 paragraph
st
“IEEE 802.15.4:2011, Table 66” “IEEE 802.15.4-2015, Table 10-4”
8.2.3.2, 1 paragraph
9.3.2.1, NOTE “IEEE 802.15.4:2011” “IEEE 802.15.4-2015”
th
“IEEE 802.15.4:2011” “IEEE 802.15.4”
9.3.2.1, 5 paragraph
st
“IEEE 802.15.4:2011, 5.2.2.2” “IEEE 802.15.4-2015, 7.3.2”
9.3.3.1, 1 paragraph
st
“IEEE 802.15.4:2011, 5.2.1 and
“IEEE 802.15.4-2015, 7.2 and 7.3.2”
9.3.3.1, 1 paragraph
5.2.2.2”
nd
“IEEE 802.15.4:2011, 5.2.1.2” “IEEE 802.15.4-2015, 7.2.2”
9.3.3.1, 2 paragraph
rd
“IEEE 802.15.4:2011, 5.2.3” “IEEE 802.15.4-2015, 7.3.3”
9.3.3.1, 3 paragraph
rd
“IEEE 802.15.4:2011, 5.2.1.1.8” “IEEE 802.15.4-2015, 7.2.1.10”
9.3.3.1, 3 paragraph
st
“IEEE 802.15.4:2011, 5.2.1” “IEEE 802.15.4-2015, 7.2”
9.3.3.2, 1 paragraph
st
“IEEE 802.15.4:2011, Figure 35” “IEEE 802.15.4-2015, Figure 7-1”
9.3.3.2, 1 paragraph
9.3.3.2, field a) “IEEE 802.15.4:2011, 5.2.1.1” “IEEE 802.15.4-2015, 7.2.1”
rd
“IEEE 802.15.4:2011, Annex B” “IEEE 802.15.4-2015, Annex B”
11.3.2, 3 paragraph
13.11.2.6, d) “IEEE 802.15.4:2011” “IEEE 802.15.4”
rd
“IEEE 802.15.4:2011” “IEEE 802.15.4-2015”
Table B.5, 3 column header
st
“IEEE 802.15.4:2011, B.3.2” “IEEE 802.15.4-2015, B.3.2”
H.1.4, 1 paragraph
OTHER REPLACEMENTS
0.3 Potentially relevant patents
In cell d) of the table providing coordinates for the Yokogawa Electric Corporation patent
holder, replace “Musashina-shi” with “Musashino-shi”.
2 Normative references
™ ™ 2
Replace reference to IEEE 802.15.4 :2011 with “IEEE Std 802.15.4 -2015 , IEEE Standard
for Low-Rate Wireless Networks”.
4.6.11.1 Overview
Replace the existing NOTE 3 with the following note:
NOTE 3 IEEE 802.15.4 specifies channel hopping and TSCH mechanisms that are similar to, but not identical to,
many of the DL mechanisms specified in this document.
Table 7 – ARMO attributes
th
For attribute 2, 4 column, add “Valid range: –4 to 32 767”.
Table 10 – DMO attributes
th
For attribute 8, 4 column, add “Default value: null string (length zero)”.
th
For attribute 27, 4 column, replace “Default value: 30 s” with “Default value: 248 s”.
---------------------- Page: 9 ----------------------
SIST EN 62734:2015/A1:2020
– 4 – IEC 62734:2014/AMD1:2019
© IEC 2019
th
For attribute 29, 4 column, replace “Default value: 30 s” with “Default value: 62 s”.
Table 19 – Proxy_System_Manager_Join method
Add Input Argument 11 as follows:
11 Consortium_Info Type: Unsigned8 Provides Consortium-specific information
from the joining device that is not specified
by this document
Replace existing Output Arguments 7 and 8 with the following text:
7 Assigned_Max_TSDU_Size Type: Indicates the maximum TSDU supported in
Unsigned16 octets which can be converted by the
source into max APDU size by taking into
account the TL, security, AL headers and
TMIC sizes
8 MIC Type: This value is used for protecting argument
OctetString4 1 through 7 with Join key. This MIC value
is generated by the Security Manager. The
Advertisement router shall not overwrite
this value. See 7.4.4.3.3.2
Table 23 – System_Manager_Join method
Add Input Argument 11 as follows:
11 Consortium_Info Type: Provides Consortium-specific information
Unsigned8 from the joining device that is not specified
by this document
Replace existing Output Arguments 7 and 8 with the following text:
7 Assigned_Max_TSDU_Size Type: Indicates the maximum TSDU supported in
Unsigned16 octets which can be converted by the
source into max APDU size by taking into
account the TL, security, AL headers and
TMIC sizes
Type: This value is used for protecting argument
8 MIC
OctetString4 1 through 7 with Join key. This MIC value
is generated by the Security Manager. The
Advertisement router shall not overwrite
this value. See 7.4.4.3.3.2
Table 27 – SCO method for contract establishment, modification, or renewal
th
For Input Argument 16, 5 column, add “Valid range: –32 768 to 16”.
th
For Input Argument 17, 5 column, add “Valid range: –32 768 to 16”.
th
For Output Argument 13, 5 column, add “Valid range: –32 768 to 16”.
th
For Output Argument 14, 5 column, add “Valid range: –32 768 to 16”.
th
For Output Argument 24, 5 column, add “Valid range: –32 768 to 16”.
th
For Output Argument 25, 5 column, add “Valid range: –32 768 to 16”.
---------------------- Page: 10 ----------------------
SIST EN 62734:2015/A1:2020
IEC 62734:2014/AMD1:2019 – 5 –
© IEC 2019
Table 30 – Contract_Data data structure
rd
For element 15, 3 column, add “Valid range: –32 768 to 16”.
rd
For element 16, 3 column, add “Valid range: –32 768 to 16”.
Table 31 – New_Device_Contract_Response data structure
rd
column, add “Valid range: –32 768 to 16”.
For element 3, 3
rd
For element 4, 3 column, add “Valid range: –32 768 to 16”.
7.3.2.6 Processing of received DPDUs
In step e), delete “Additionally, the procedure shall verify that the 8-bit MHR sequence
number is not 0xFF. If the 8-bit MHR sequence number is 0xFF, the procedure shall return
with a status of INVALID_SEQUENCE_NUMBER.”
7.3.3.9 Processing for received TPDUs
In step h), replace “may decrement” with “shall decrement”.
7.4.4.3.3.2 MIC generation for System_Manager_Join response
Replace the existing formula with the following:
[Output Argument number 1 . number 7 in Table 23
MACTag = HMAC-MMO
K_join
|| EUI- || Challenge ]
64join_device join_device
Table 62 – Security_Sym_Join_Request data structure
Replace the elements in Table 62 with the following:
New_Device_EUI64 1 Type: EUI64Address
Classification: Constant
Accessibility: Read only
DL_Subnet_ID 2 Type: Unsigned16
Classification: Static
Accessibility: Read/write
Comm_SW_Major_Version 3 Type: Unsigned8
Classification: Static
Accessibility: Read only
Comm_SW_Minor_Version 4 Type: Unsigned8
Classification: Static
Accessibility: Read only
128_Bit_Challenge_From_New_Device 5 Type: Unsigned128
Classification: Static
Accessibility: Read/write
Algorithm_Identifier 6 Type: Unsigned8
Classification: Static
Accessibility: Read only
Default value: 1
MIC 7 Type: Unsigned32
Classification: Static
Accessibility: Read only
---------------------- Page: 11 ----------------------
SIST EN 62734:2015/A1:2020
– 6 – IEC 62734:2014/AMD1:2019
© IEC 2019
7.4.5.2.2 Symmetric-key join request
In the text following Table 62, after the first bullet (New_Device_EUI64), insert the following
three additional bullets:
• DL_Subnet_ID is the DL subnet that the new device is trying to join; it is also the DL
subnet of the advertising router.
• Comm_SW_Major_Version is a copy of the DMO Comm_SW_Major_Version attribute; see
Table 10, Attribute 20.
• Comm_SW_Minor_Version is a copy of the DMO Comm_SW_Minor_Version attribute; see
Table 10, Attribute 21.
In the last bullet following Table 62, repla
...
SLOVENSKI STANDARD
SIST EN 62734:2015/oprA1:2018
01-julij-2018
,QGXVWULMVNDRPUHåMD%UH]åLþQRNRPXQLNDFLMVNRRPUHåMHLQNRPXQLNDFLMVNLSURILOL
,6$D'RSROQLOR$
Industrial networks - Wireless communication network and communication profiles - ISA
100.11a
Industrielle Kommunikationsnetze - Drahtlose Kommunikationsnetze und
Kommunikationsprofile - ISA 100.11a
Réseaux industriels - Réseau de communication sans fil et profils de communication -
ISA 100.11a
Ta slovenski standard je istoveten z: EN 62734:2015/prA1:2018
ICS:
25.040.01 Sistemi za avtomatizacijo v Industrial automation
industriji na splošno systems in general
33.040.40 Podatkovna komunikacijska Data communication
omrežja networks
35.100.01 Medsebojno povezovanje Open systems
odprtih sistemov na splošno interconnection in general
SIST EN 62734:2015/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62734:2015/oprA1:2018
---------------------- Page: 2 ----------------------
SIST EN 62734:2015/oprA1:2018
65C/918/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62734/AMD1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2018-04-13 2018-07-06
SUPERSEDES DOCUMENTS:
65C/902/CD,65C/913/CC
IEC SC 65C : INDUSTRIAL NETWORKS
SECRETARIAT: SECRETARY:
France Ms Valérie DEMASSIEUX
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SC 22G,TC 57,SC 121A
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Industrial networks - Wireless communication network and communication profiles - ISA 100.11a
PROPOSED STABILITY DATE: 2022
NOTE FROM TC/SC OFFICERS:
NC comments on this CDV will be resolved either during the next SC65C/WG16 meeting currently
scheduled on October 8th-9th, 2018 in Geneva (Switzerland), or a web meeting
Copyright © 2018 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
SIST EN 62734:2015/oprA1:2018
---------------------- Page: 4 ----------------------
SIST EN 62734:2015/oprA1:2018
– 2 – IEC CDV 62734:2014/AMD1© IEC 2018
1 FOREWORD
2 This amendment has been prepared by subcommittee 65C: Industrial networks, of IEC
3 technical committee 65: Industrial-process measurement, control and automation.
4 The text of this amendment is based on the following documents:
FDIS Report on voting
65C/XX/FDIS 65C/XX/RVD
5
6 Full information on the voting for the approval of this amendment can be found in the report
7 on voting indicated in the above table.
8 The committee has decided that the contents of this amendment and the base publication will
9 remain unchanged until the stability date indicated on the IEC web site under
10 "http://webstore.iec.ch" in the data related to the specific publication. At this date, the
11 publication will be
12 • reconfirmed,
13 • withdrawn,
14 • replaced by a revised edition, or
15 • amended.
16 The National Committees are requested to note that for this publication the stability date
17 is 2022.
18 THIS TEXT IS INCLUDED FOR THE INFORMATION OF THE NATIONAL COMMITTEES AND WILL BE
19 DELETED AT THE PUBLICATION STAGE.
20 _____________
21
22 Replace all references to “IEEE 802.15.4:2011” and “IEEE 802.15.4e” with
23 “IEEE 802.15.4:2015”.
24
25 0.3 Potentially relevant patents
26 In cell d) of the table providing coordinates for the Yokogawa Electric Corporation patent
27 holder, replace “Musashina-shi” with “Musashino-shi”.
28 6.2.7.2.7 Alert reporting management object attributes, alerts and methods
29 In Table 7, for Attribute 2 (Confirmation_Timeout_Device_Diagnostics), add valid value set of
30 -4 to 32767.
31 6.2.8.1.1 General
32 In Table 10, for DMO Attribute 8 (Tag_Name), add default value of null string (length zero).
33 Also in Table 10, for the default value of DMO Attribute 27 (Contract_Request_Timeout),
34 replace the value 30 s with 248 s.
35 Also in Table 10, for the default value of DMO Attribute 29 (Max_Retry_Timeout_Interval),
36 replace the value 30 s with 62 s.
---------------------- Page: 5 ----------------------
SIST EN 62734:2015/oprA1:2018
IEC CDV 62734:2014/AMD1© IEC 2018 – 3 –
37 6.3.9.2.2 Device management object methods for advertising router
38 6.3.9.5 Device management service object
39 In Table 19 and Table 23, add Input Argument 11 as follows:
11 Consortium_Info Type: Unsigned8 Provides Consortium-specific information
from the joining device that is not specified
by this standard
40
41 Also in Table 19 and Table 23, replace Output Arguments 7 and 8 with the following:
7 Assigned_Max_TSDU_Size Type: Unsigned16 Indicates the maximum TSDU supported in
octets which can be converted by the source
into max APDU size by taking into account
the TL, security, AL headers and TMIC sizes
8 MIC Type: OctetString4 This value is used for protecting argument 1
through 7 with Join key. This MIC value is
generated by the Security Manager. The
Advertisement router shall not overwrite this
value. See 7.4.4.3.3.2
42
43 6.3.11.2.5.4 Contract request and response arguments
44 In Table 27, Input Arguments 16-17, Output Arguments 13-14, 24-25; Table 30, Elements 15-
45 16; and Table 31, Elements 3-4: add valid value set of -32768 to 16 for the specified
46 elements.
47 7.3.2.6 Processing of received DPDUs
48 In step e), delete “Additionally, the procedure shall verify that the 8-bit MHR sequence
49 number is not 0xFF. If the 8-bit MHR sequence number is 0xFF, the procedure shall return
50 with a status of INVALID_SEQUENCE_NUMBER.”
51 7.3.3.9 Processing for received TPDUs
52 In step h), replace “may decrement” with “shall decrement”.
53 7.4.4.3.3.2 MIC generation for System_Manager_Join response
54 Replace the formula with the following:
55 MACTag = HMAC- MMO [Output Argument number 1 . number 7 in Table 23 ||
K_join
56 EUI- || Challenge ]
64join_device join_device
57 7.4.5.2.2 Symmetric-key join request
58 Replace the elements in Table 62 with the following:
---------------------- Page: 6 ----------------------
SIST EN 62734:2015/oprA1:2018
– 4 – IEC CDV 62734:2014/AMD1© IEC 2018
New_Device_EUI64 1 Type: EUI64Address
Classification: Constant
Accessibility: Read only
DL_Subnet_ID 2 Type: Unsigned16
Classification: Static
Accessibility: Read/write
Comm_SW_Major_Version 3 Type: Unsigned8
Classification: Static
Accessibility: Read only
Comm_SW_Minor_Version 4 Type: Unsigned8
Classification: Static
Accessibility: Read only
128_Bit_Challenge_From_New_Device 5 Type: Unsigned128
Classification: Static
Accessibility: Read/write
Algorithm_Identifier 6 Type: Unsigned8
Classification: Static
Accessibility: Read only
Default value : 1
MIC 7 Type: Unsigned32
Classification: Static
Accessibility: Read only
59
60 Also, in the text following Table 62, as the second, third, and fourth items, add the following:
61 • DL_Subnet_ID is the DL subnet that the new device is trying to join; it is also the DL
62 subnet of the advertising router.
63 • Comm_SW_Major_Version is a copy of the DMO Comm_SW_Major_Version
64 attribute; see Table 10, Attribute 20.
65 • Comm_SW_Minor_Version is a copy of the DMO Comm_SW_Minor_Version
66 attribute; see Table 10, Attribute 21.
67 Also, in the text following Table 62, replace the last item in the list with the following:
68 • The MIC is of 32 bits in length and is computed over the elements 1 through 6, using
69 the join key and the 13 most significant octets of the challenge as nonce.
70
71 7.5.4 Proxy security management object methods related to the session establishment
72 7.6.3 Device security management object methods 7.6.3 related to T-key update
73 In the text following Table 81, Table 82, Table 84, and Table 85, in text similar to “… security
74 level [for Security_Control] is chosen from MIC-32, MIC-64, and MIC-128 with the Master key
75 security level assigned in the join process”, delete “assigned in the join process”.
76
77 7.11.3.2 Additional device security management object methods to support key
78 management
79 In Table 95, in the description for Argument Number 8 (MIC), delete “assigned in joining
80 process”.
81 In the text before Table 96, add the following:
82 Use of the Key_Policy_Update method shall be limited to changes to
83 SoftLifespan_Ratio. More general changes of key policy are accomplished by key
84 replacement, as described in subclause 7.6.
85 In Table 96, in the description for Argument Number 10 (MIC), delete “assigned in joining
86 process”.
87 9.1.9.4.3 Unicast transaction
88 Delete the paragraph that begins with "IEEE 802.15.4:2011 permits CCA Mode 3".
---------------------- Page: 7 ----------------------
SIST EN 62734:2015/oprA1:2018
IEC CDV 62734:2014/AMD1© IEC 2018 – 5 –
89 9.1.15.6 Country code
90 Delete NOTE 1, change "NOTE 2" to "NOTE" (i.e., delete the number), and replace the
91 paragraph after the deleted NOTE 1 with:
92 When Bit11, Bit13 and Bit14 (ETSI, LBT and FHSS) are all true, operation may need to
93 switch momentarily to the non-adaptive rules of ETSI EN 300 328 v2.1.1 while
94 sending a near-maximal-size ACK/NAK DPDU (as short control signaling) within a
95 transaction and for the immediately following Tx-gap-time of EN-mandated non-
96 transmission, thus supporting mode V.4 category 6), where the exact requirements
97 for such momentary mode-switching are specified.
98 9.3.4 MAC acknowledgment DPDUs
99 In Table 117, last row, first column, replace "0.3" with "0, 3".
100 9.3.5.2.4.2 Advertisement join links
101 In the text after Table 128, replace the text for DauxJoinBackoff as follows:
102 During the join process, DauxJoinBackoff shall be used instead of MaxBackoffExp,
103 following the exponential backoff procedure described in 9.1.8.2.
104 In Table 129, in the intersection of DauxJoinRx and Type_SelectiveAllowed, replace 1 with 0
105 as shown:
Field name DauxJoinTx DauxJoinRx DauxAdvRx (when
DauxJoinFldXmit.Bit3
=1)
Type-SelectiveAllowed 1 0 1
106
107 9.3.5.3.1 General
108 After “a solicitation’s DMIC shall be built using a security key of K_global and a nominal TAI
109 time of zero”, add “and a source address of zero”.
110 9.4.2.1 General
111 In Table 141, for Attribute 5 (SolicTemplate), replace “Default value: Null” with “Default
112 value: 0x80”.
113 Also in Table 141, for the default value of DLMO Attribute 12 (MaxLifetime), replace the value
114 120 (30 s) with 248 (62 s).
115 9.4.2.23 DLMO device capabilities
116 In Table 148, replace the row for Energy Design with the following:
5-8 octet EnergyDesign (see Table 146)
117
118 In the text following Table 148, in the description of • dlmo.DeviceCapability.ClockStability,
119 replace “absence” with “presence”.
120 9.4.2.27.1 General
121 Replace “Such skipped links should be treated as equivalent to NAK for the applicable
122 channel” with the following:
123 Such skipped links should be counted as a NoACK for the applicable channel, that is,
124 they should be counted as unacknowledged DL transmissions in the ChannelDiag
125 diagnostic.
126 9.4.3.5.3 Superframe current timeslot state
127 Replace the formula for ChOffset with the following:
128 ChOffset = ((SlotNumAbs – ChBirth) mod ChCycle) / ChRate
---------------------- Page: 8 ----------------------
SIST EN 62734:2015/oprA1:2018
– 6 – IEC CDV 62734:2014/AMD1© IEC 2018
129 9.4.3.7.2 Semantics
130 In Table 184, for bitmap encoding, replace BooleanArray32 with 32-bit BitString.
131 9.4.3.9.2 Semantics
132 In Table 188, for ClockSigma, replace “Type: Integer16” with “Type: Unsigned16”.
133 11.6.2.5.2 Attributes
134 In Table 229, Attribute 2 (MaxNbOfPorts), replace in the description “Number of active ports”
135 with “Maximum number of ports available”.
136 Also in Table 229, add Attribute 11 as follows:
TPDUoutOfSecurityPolicies Type: Alert report
11 Used to change the priority
AlertDescriptor descriptor
of the
Classification: Static
TPDUoutOfSecurityPolicies
Accessibility: Read/write
alert; this alert can also be
turned on or turned off Initial default value: Alert
report disabled = True
Alert report priority = 2
(journal)
Valid value set: See
type definition
137
138 13.9.1 Device provisioning object
139 In the latter part of Table 368, replace attribute identifiers as follows:
Attribute name Attribute identifier
PKI_Root_Certificate 18
Number of PKI_Certificates 19
PKI_Certificate 20
Current_UTC_Adjustment 21
PKI_Certificate_Type 22
140
141 Also in Table 368, for Attribute 11 (Target_Nwk_ID), replace default value of 0 with default
142 value of 1.
143 Also in Table 368, for Attribute 13 (Target_Join_Method), replace default value of 1 with
144 default value of 1 in devices that support asymmetric key join, and default value of 0 in
145 devices that do not support asymmetric key join.
146 13.9.1 Device provisioning object
147 13.10.1 Device provisioning service object attributes
148 In Table 368 and Table 371, for Attribute Target_Channel_List, replace data type with “Type:
149 Unsigned16”.
150
151 B.7 Network layer
152 In Table B.18 and Table B.19, for Minimum number entries supported for Backbone router,
153 replace 15
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.