SIST EN 17306:2019
(Main)Liquid petroleum products - Determination of distillation characteristics at atmospheric pressure - Micro-distillation
Liquid petroleum products - Determination of distillation characteristics at atmospheric pressure - Micro-distillation
This document covers a procedure for determination of the distillation characteristics of petroleum products having boiling range at atmospheric pressure between 20 °C to 400 °C using an automatic micro distillation apparatus. The test method is applicable to such products as light and middle distillates, automotive spark-ignition engine fuel, automotive spark ignition engine fuel containing up to 10 %vol ethanol, aviation gasoline, aviation turbine fuel, regular and low sulfur diesel fuel, biodiesel blends up to 30 %vol. biodiesel, special petroleum spirits, naphtha, white spirit, kerosene, burner fuels and marine fuels. It is also applicable to hydrocarbons with a narrow boiling range, like organic solvents or oxygenated compounds.
Flüssige Mineralölerzeugnisse - Bestimmung der Destillationseigenschaften bei atmosphärischem Druck - Mikrodestillation
Dieses Dokument legt ein Laborverfahren zur Bestimmung der Destillationseigenschaften von leichten und mittleren Destillaten aus Erdöl und verwandten Produkten mit biologischem oder synthetischem Ursprung, die bei atmosphärischem Druck einen Destillationsbeginn oberhalb von 20 °C und Destillationsendpunkte unterhalb von etwa 400 °C haben, unter Verwendung eines automatischen Mikrodestillationsgerätes fest.
Dieses Prüfverfahren ist anwendbar auf Produkte wie Leicht- und Mitteldestillate, Ottokraftstoffe, Ottokraftstoffe mit einem Ethanolgehalt von bis zu 20 % (V/V), Flugbenzine, Flugturbinenkraftstoffe, (paraffinische) Dieselkraftstoffe, FAME (B100), Dieselkraftstoffmischungen mit bis zu 30 % (V/V) Fettsäure-methylester (FAME), spezielle Petroleumbenzine, Naphthas (Rohbenzine), Testbenzine, Kerosin, Brennstoffe für Brenner und Schifffahrtsbrennstoffe.
Das Prüfverfahren ist auch auf Kohlenwasserstoffe mit einem engen Siedebereich anwendbar, wie z. B. organische Lösemittel oder sauerstoffhaltige Verbindungen.
Das Prüfverfahren ist für die Analyse von Destillaten ausgelegt; es ist nicht auf Produkte anwendbar, die beträchtliche Mengen an Rückstandsmaterial enthalten.
ANMERKUNG Für den Zweck dieser Norm wird der Ausdruck „% (V/V)“ verwendet, um den Volumenanteil darzustellen.
Produits pétroliers - Distillation des produits pétroliers et de combustibles liquides à la pression atmosphérique - Méthode Micro Distillation
Le présent document spécifie une méthode de laboratoire pour l'identification des caractéristiques de distillation des distillats pétroliers légers et moyens, ainsi que des produits connexes d'origine biologique ou synthétique, ayant un point initial de distillation supérieur à 20 °C et un point final inférieur à environ 400 °C, à la pression atmosphérique en utilisant un appareillage de micro-distillation automatique.
Cette méthode d'essai s'applique aux produits tels que les distillats légers et moyens, les carburants automobiles pour moteurs à allumage par étincelle, les carburants automobiles pour moteurs à allumage par étincelle contenant jusqu'à 20 % (V/V) d'éthanol, les essences aéronautiques, les carburéacteurs, les carburants diesel (paraffiniques), les EMAG (B100), les mélanges de diesel contenant jusqu'à 30 % (V/V) d'esters méthyliques d'acides gras (EMAG), les essences pétrolières spéciales, le naphta, le white-spirit, le kérosène, les combustibles de chauffe et les combustibles pour la marine.
Cette méthode d'essai s'applique également aux hydrocarbures présentant un intervalle de distillation étroit, tels que les solvants organiques ou les composés oxygénés.
La méthode d'essai est conçue pour l'analyse des produits de distillation ; elle ne s'applique pas aux produits qui contiennent des quantités appréciables de matières résiduelles.
NOTE Pour les besoins de la présente norme, le terme «% (V/V)» est utilisé pour représenter la fraction volumique.
Tekoči naftni proizvodi - Določevanje destilacijskih značilnosti pri atmosferskem tlaku - Mikrodestilacija
Ta dokument zajema postopek za določevanje destilacijskih značilnosti naftnih proizvodov, ki imajo pri atmosferskem tlaku območje vrelišča med 20 °C in 400 °C, z avtomatsko aparaturo za mikrodestilacijo. Preskusna metoda se uporablja za proizvode, kot so lahki in srednji destilati, gorivo za motorna vozila z motorjem z vžiganjem na iskro, gorivo za motorna vozila z motorjem z vžiganjem na iskro, ki vsebuje do 10 % (vol.) etanola, letalski bencin, gorivo za letalske turbine, dizelsko gorivo z običajno in nizko vsebnostjo žvepla, mešanice biodizla z do 30 % (vol.) biodizla, specialni petroleter, nafta, beli špirit, kerozin, kurilna olja in ladijska goriva. Uporablja se tudi za ogljikovodike z majhnim območjem vrelišča, kot so organska topila ali kisikove spojine.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17306:2019
01-november-2019
Tekoči naftni proizvodi - Določevanje destilacijskih značilnosti pri atmosferskem
tlaku - Mikrodestilacija
Liquid petroleum products - Determination of distillation characteristics at atmospheric
pressure - Micro-distillation
Flüssige Mineralölerzeugnisse - Bestimmung der Destillationseigenschaften bei
atmosphärischem Druck - Mikrodestillation
Produits pétroliers - Distillation des produits pétroliers et de combustibles liquides à la
pression atmosphérique - Méthode Micro Distillation
Ta slovenski standard je istoveten z: EN 17306:2019
ICS:
75.160.20 Tekoča goriva Liquid fuels
SIST EN 17306:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17306:2019
---------------------- Page: 2 ----------------------
SIST EN 17306:2019
EN 17306
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2019
EUROPÄISCHE NORM
ICS 75.160.20
English Version
Liquid petroleum products - Determination of distillation
characteristics at atmospheric pressure - Micro-distillation
Produits pétroliers liquides - Détermination des Flüssige Mineralölerzeugnisse - Bestimmung der
caractéristiques de distillation à la pression Destillationseigenschaften bei atmosphärischem Druck
atmosphérique - Micro-distillation - Mikrodestillation
This European Standard was approved by CEN on 21 June 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17306:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17306:2019
EN 17306:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 7
5 Reagents and materials . 7
6 Apparatus . 7
6.1 Micro distillation unit . 7
6.2 Barometer for calibration . 8
6.3 Sampling device . 8
6.4 Waste beaker .
...
SLOVENSKI STANDARD
oSIST prEN 17306:2018
01-oktober-2018
7HNRþLQDIWQLSURL]YRGL'RORþHYDQMHGHVWLODFLMVNLK]QDþLOQRVWLSULDWPRVIHUVNHP
WODNX0LNURGHVWLODFLMD
Liquid petroleum products - Determination of distillation characteristics at atmospheric
pressure - Micro-distillation
Flüssige Mineralölerzeugnisse - Bestimmung der Destillationseigenschaften bei
atmosphärischem Druck - Mikrodestillation
Produits pétroliers - Distillation des produits pétroliers et de combustibles liquides à la
pression atmosphérique - Méthode Micro Distillation
Ta slovenski standard je istoveten z: prEN 17306
ICS:
75.160.20 7HNRþDJRULYD Liquid fuels
oSIST prEN 17306:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17306:2018
---------------------- Page: 2 ----------------------
oSIST prEN 17306:2018
DRAFT
EUROPEAN STANDARD
prEN 17306
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2018
ICS 75.160.20
English Version
Liquid petroleum products - Determination of distillation
characteristics at atmospheric pressure - Micro-distillation
Produits pétroliers - Distillation des produits pétroliers Flüssige Mineralölerzeugnisse - Bestimmung der
et de combustibles liquides à la pression Destillationseigenschaften bei atmosphärischem Druck
atmosphérique - Méthode Micro Distillation - Mikrodestillation
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 19.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17306:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17306:2018
prEN 17306:2018 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 7
5 Reagents and materials . 7
6 Apparatus . 7
6.1 Micro distillation unit . 7
6.2 Barometer for calibration .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.