SIST EN 50290-2-25:2002

Communication cables -- Part 2-25: Common design rules and construction - Polypropylene insulation compounds

This Part 2-25 of EN 50290 gives specific requirements for polypropylene insulation compounds used in communication cables.
It is to be read in conjunction with Part 2-20 of EN 50290.

Kommunikationskabel -- Teil 2-25: Gemeinsame Regeln für Entwicklung und Konstruktion - Polypropylen-Isoliermischungen

Câbles de communication -- Partie 2-25: Règles de conception communes et construction - Polypropylène pour enveloppes isolantes

Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds (Note: Applies only in conjunction with EN 50290-2-20)

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2002
• Withdrawal Date: 11-Oct-2016
• ICS: 29.035.20 - Plastics and rubber insulating materials
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: MOC - Mobile Communications
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 12-Oct-2016
• Due Date: 04-Nov-2016
• Completion Date: 12-Oct-2016
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/212 - ICT - metallic and optical cables and cabling systems
• Ref Project: EN 50290-2-25:2002 - Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds

Relations

• Revised: SIST EN 50290-2-25:2014 - Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds
• Effective Date: 06-May-2014
• Replaced By: SIST EN 50290-2-25:2014 - Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds
• Effective Date: 28-Jan-2023
• Replaced By: SIST EN 50290-2-25:2014 - Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds
• Effective Date: 07-Jun-2022
• Replaces: SIST HD 624.5 S1:1996 - Materials used in communication cables -- Part 5: Polypropylene insulation compounds
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50290-2-25:2002
01-september-2002
1DGRPHãþD
SIST HD 624.5 S1:1996
Communication cables - Part 2-25: Common design rules and construction -
Polypropylene insulation compounds (Note: Applies only in conjunction with EN
50290-2-20)
Communication cables -- Part 2-25: Common design rules and construction -
Polypropylene insulation compounds
Kommunikationskabel -- Teil 2-25: Gemeinsame Regeln für Entwicklung und
Konstruktion - Polypropylen-Isoliermischungen
Câbles de communication -- Partie 2-25: Règles de conception communes et
construction - Polypropylène pour enveloppes isolantes
Ta slovenski standard je istoveten z: EN 50290-2-25:2002
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 50290-2-25:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50290-2-25:2002

---------------------- Page: 2 ----------------------

SIST EN 50290-2-25:2002
EUROPEAN STANDARD EN 50290-2-25
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2002
ICS 29.035.20; 33.120.10 Supersedes HD 624.5 S1:1995
English version
Communication cables
Part 2-25: Common design rules and construction –
Polypropylene insulation compounds
Câbles de communication Kommunikationskabel
Partie 2-25: Règles de conception Teil 2-25: Gemeinsame Regeln
communes et construction - für Entwicklung und Konstruktion -
Polypropylène pour enveloppes Polypropylen-Isoliermischungen
isolantes
This European Standard was approved by CENELEC on 2001-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any
other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50290-2-25:2002 E

---------------------- Page: 3 ----------------------

SIST EN 50290-2-25:2002
EN 50290-2-25:2002 - 2 -
Foreword
This European Standard was prepared by a joint working group of the Technical Committees CENELEC
TC 46X, Communication cables, and CENELEC TC 86A, Optical fibres and optical fibre cables
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as
EN 50290-2-25 on 2001-11-01.
This European Standard supersedes HD 624.5 S1:1995.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-08-01
This European Standard has been prepared under the European Mandate M/212 given to CENELEC by the
European Commission and the European Free Trade Association.
_________

---------------------- Page: 4 ----------------------

SIST EN 50290-2-25:2002
- 3 - EN 50290-2-25:2002
1 Scope
This Part 2-25 of EN 50290 gives specific requirements for polypropylene insulation compounds used in
communication cables.
It is to be read in conjunction with Part 2-20 of EN 50290.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed her
...