SIST EN ISO 6876:2026
(Main)Dentistry - Endodontic sealing material (ISO 6876:2025)
Dentistry - Endodontic sealing material (ISO 6876:2025)
This document specifies the classification, requirements and test methods for endodontic sealing materials used in dentistry.
This document is applicable to materials used for conventional orthograde endodontic sealing (Type 1) and materials used for other endodontic sealing procedures including apexification, perforation filling, resorption treatment or retrograde root-end filling (Type 2).
The Type 2 endodontic sealing materials may be used for vital pulp therapy. However, this document does not address or include requirements for vital pulp therapy.
This document does not specify requirements or test methods for sterility.
NOTE 1 Reference to applicable national regulations and internationally accepted pharmacopeias can be made.
NOTE 2 National requirements regarding sterilization processes, if available, can be used. Standards on methods of validating sterilization processes are also available: ISO 11737-1, ISO 11737-2 and ISO 11737-3.
Zahnheilkunde - Endodontische Versiegelungswerkstoffe (ISO 6876:2025)
Dieses Dokument legt die Klassifizierung, Anforderungen und Prüfverfahren fest für endodontische Versiegelungswerkstoffe, die in der Zahnheilkunde verwendet werden.
Dieses Dokument gilt sowohl für Werkstoffe, die für die konventionelle orthograde endodontische Versiegelung (Typ 1) verwendet werden, als auch für Werkstoffe, die für andere endodontische Versiegelungsverfahren wie Apexifikation, Perforationsfüllung, Resorptionsbehandlung oder retrograde Wurzelendfüllung (Typ 2) verwendet werden.
Die endodontischen Versiegelungswerkstoffe vom Typ 2 dürfen für die Vitalpulpatherapie verwendet werden. Dieses Dokument enthält jedoch keine Anforderungen in Bezug auf die Vitalpulpatherapie.
Dieses Dokument legt keine Anforderungen oder Prüfverfahren für die Sterilität fest.
ANMERKUNG 1 Es kann auf geltende nationale Vorschriften und international anerkannte Arzneibücher verwiesen werden.
ANMERKUNG 2 Nationale Anforderungen an Sterilisationsverfahren können, falls vorhanden, angewendet werden. Es sind außerdem Normen zu Validierungsverfahren für Sterilisationsverfahren verfügbar: ISO 11737 1, ISO 11737 2 und ISO 11737 3.
Médecine bucco-dentaire - Matériaux de scellement endodontique (ISO 6876:2025)
Le présent document spécifie la classification, les exigences et les méthodes d’essai relatives aux matériaux de scellement endodontique utilisés en médecine bucco-dentaire.
Le présent document est applicable aux matériaux utilisés pour le scellement endodontique orthograde conventionnel (type 1) et aux matériaux utilisés pour d’autres procédures de scellement endodontique, comme l’apexification, l’obturation des perforations, le traitement de résorptions ou l’obturation rétrograde des extrémités du canal radiculaire (type 2).
Les matériaux de scellement endodontique de type 2 peuvent être utilisés pour la thérapie pulpaire. Cependant, le présent document ne traite pas de la thérapie pulpaire et n’inclut pas d’exigences à ce sujet.
Le présent document ne spécifie pas d’exigences ou de méthodes d’essai applicables à la stérilité.
NOTE 1 Il est possible de se référer aux réglementations nationales en vigueur et aux pharmacopées internationalement reconnues.
NOTE 2 Il est possible d’utiliser les exigences nationales concernant les procédés de stérilisation, si elles sont disponibles. Des normes sur les méthodes de validation des procédés de stérilisation sont également disponibles: ISO 11737-1, ISO 11737-2 et ISO 11737-3.
Zobozdravstvo - Endodontski zapiralni materiali (ISO 6876:2025)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2026
Nadomešča:
SIST EN ISO 6876:2012
Zobozdravstvo - Endodontski zapiralni materiali (ISO 6876:2025)
Dentistry - Endodontic sealing material (ISO 6876:2025)
Zahnheilkunde - Endodontische Versiegelungswerkstoffe (ISO 6876:2025)
Médecine bucco-dentaire - Matériaux de scellement endodontique (ISO 6876:2025)
Ta slovenski standard je istoveten z: EN ISO 6876:2025
ICS:
11.060.10 Zobotehnični materiali Dental materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 6876
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2025
EUROPÄISCHE NORM
ICS 11.060.10 Supersedes EN ISO 6876:2012
English Version
Dentistry - Endodontic sealing material (ISO 6876:2025)
Médecine bucco-dentaire - Matériaux de scellement Zahnheilkunde - Endodontische
endodontique (ISO 6876:2025) Versiegelungswerkstoffe (ISO 6876:2025)
This European Standard was approved by CEN on 28 September 2025.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6876:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 6876:2025) has been prepared by Technical Committee ISO/TC 106 "Dentistry"
in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2026, and conflicting national standards shall be
withdrawn at the latest by May 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 6876:2012.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 6876:2025 has been approved by CEN as EN ISO 6876:2025 without any modification.
International
Standard
ISO 6876
Fourth edition
Dentistry — Endodontic sealing
2025-11
materials
Médecine bucco-dentaire — Matériaux de scellement
endodontique
Reference number
ISO 6876:2025(en) © ISO 2025
ISO 6876:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 6876:2025(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Requirements . 2
5.1 General .2
5.2 Appearance .3
5.3 Flow (Type 1 only) .3
5.4 Working time (Type 1 only) .3
5.5 Setting time .3
5.6 Film thickness (Type 1 only) . .3
5.7 Solubility and disintegration .3
5.8 Radiopacity .3
6 Sampling . 4
7 Test methods . 4
7.1 Test conditions .4
7.2 Appearance .4
7.2.1 General .4
7.2.2 Treatment of results .4
7.3 Flow (Type 1 materials) .4
7.3.1 General .4
7.3.2 Apparatus .4
7.3.3 Procedure .5
7.3.4 Treatment of results .6
7.4 Working time .6
7.4.1 General .6
7.4.2 Apparatus .6
7.4.3 Procedure .6
7.4.4 Treatment of results .7
7.5 Setting time .7
7.5.1 General .7
7.5.2 Apparatus .7
7.5.3 Preconditioning of the apparatus .8
7.5.4 Sample preparation .8
7.5.5 Procedure .8
7.6 Film thickness (Type 1 only) . .9
7.6.1 Apparatus .9
7.6.2 Procedure .9
7.6.3 Treatment of the results .9
7.7 Solubility and disintegration .10
7.7.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.