SIST EN 50363-10-2:2006

Insulating, sheathing and covering materials for low voltage energy cables -- Part 10-2: Miscellaneous sheathing compounds - Thermoplastic polyurethane

This part of EN 50363 specifies the test requirements for the physical properties of the harmonised thermoplastic polyurethane sheathing compound given in Table 1.

Isolier-, Mantel- und Umhüllungswerkstoffe für Niederspannungskabel und -leitungen -- Teil 10-2: Diverse Mantelmischungen - Thermoplastisches Polyurethan

Dieser Teil der EN 50363 legt die Anforderungen an thermoplastische  Polyurethan- Mantelmischungen fest, die in Tabelle 1 aufgeführt sind. Die entsprechenden Prüfverfahren sind in den Normen der  Reihe EN 60811 und EN 50396 beschrieben.

Matériaux pour enveloppe isolante, gainage et revêtement pour les câbles d'énergie basse tension -- Partie 10-2: Mélanges divers pour gaine - Polyuréthane thermoplastique

La présente partie de la EN 50363 mentionne les prescriptions d’essais pour les propriétés physiques des mélanges de gainage harmonisés en polyuréthane thermoplastique, donnés dans le Tableau 1.

Materiali za izoliranje, oplaščenje in prevleke nizkonapetostnih energetskih kablov - 10-2. del: Razne mase za oplaščenje - Plastomerni poliuretan

General Information

• Status: Published
• Publication Date: 30-Sep-2006
• ICS: 29.035.20 - Plastics and rubber insulating materials
• ICS: 29.060.20 - Cables
• Technical Committee: IEKA - Electric cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-2006
• Due Date: 01-Oct-2006
• Completion Date: 01-Oct-2006
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: EN 50363-10-2:2005 - Insulating, sheathing and covering materials for low voltage energy cables - Part 10-2: Miscellaneous sheathing compounds - Thermoplastic polyurethane

Standards Content (Sample)

SLOVENSKI SIST EN 50363-10-2:2006

STANDARD
oktober 2006
Materiali za izoliranje, oplaščenje in prevleke nizkonapetostnih energetskih
kablov - 10-2. del: Razne mase za oplaščenje - Plastomerni poliuretan
Insulating, sheathing and covering materials for low voltage energy cables - Part 10-
2: Miscellaneous sheathing compounds - Thermoplastic polyurethane
ICS 29.035.20; 29.060.20 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 50363-10-2
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2005

ICS 29.035.20
English version
Insulating, sheathing and covering materials
for low voltage energy cables
Part 10-2: Miscellaneous sheathing compounds –
Thermoplastic polyurethane
Matériaux pour enveloppe isolante, Isolier-, Mantel- und
gainage et revêtement pour les câbles Umhüllungswerkstoffe für
d'énergie basse tension Niederspannungskabel und -leitungen
Partie 10-2: Mélanges divers pour gaine - Teil 10-2: Diverse Mantelmischungen -
Polyuréthane thermoplastique Thermoplastisches Polyurethan

This European Standard was approved by CENELEC on 2005-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 50363-10-2:2005 E
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 20, Electric cables.
The text of the draft was submitted to the formal vote and was approved by CENELEC as
EN 50363-10-2 on 2005-11-01.
EN 50363 (in all its parts) supersedes the equivalent information at present in HD 21.1 S4,
HD 21.14 S1, HD 22.1 S4, HD 22.10 S1, HD 22.14 S2 and prHD 21.15 S1. The existing information in
these HDs will be deleted at the next maintenance review.
EN 50363-10-2 should be read in conjunction with EN 50363-0.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-11-01
__________
- 3 - EN 50363-10-2:2005
Contents
1 Scope.4
2 Normative references.4
3 Definitions.4
4 Properties.4
Table 1 – Types of thermoplastic polyurethane sheathing compound.4
Table 2 – Requirements for the tests for thermoplastic polyurethane (TMPU)
sheathing compound .
...