SIST-TP CWA 16926-69:2023
(Main)Extensions for Financial Services (XFS) interface specification Release 3.50 - Part 69: Sensors and Indicators Unit Device Class Interface - Programmer's Reference - Migration from Version 3.40 (CWA 16926:2020) to Version 3.50 (this CWA)
Extensions for Financial Services (XFS) interface specification Release 3.50 - Part 69: Sensors and Indicators Unit Device Class Interface - Programmer's Reference - Migration from Version 3.40 (CWA 16926:2020) to Version 3.50 (this CWA)
This specification shows the modifications made to version 3.40 of CWA 16926-10 in version 3.50.
Specifikacija vmesnika razširitev za finančne storitve (XFS), izdaja 3.50 - 69. del: Senzorji in kazalniki - vmesnik razreda naprave - Referenca za programerje - Prehod z različice 3.40 (CWA 16926:2020) na različico 3.50 (ta CWA)
Ta specifikacija prikazuje spremembe različice 3.40 standarda CWA 16926-10 v različici 3.50.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST CWA 16926-69:2023
01-april-2023
Specifikacija vmesnika razširitev za finančne storitve (XFS), izdaja 3.50 - 69. del:
Senzorji in kazalniki - vmesnik razreda naprave - Referenca za programerje -
Prehod z različice 3.40 (CWA 16926:2020) na različico 3.50 (ta CWA)
Extensions for Financial Services (XFS) interface specification Release 3.50 - Part 69:
Sensors and Indicators Unit Device Class Interface - Programmer's Reference -
Migration from Version 3.40 (CWA 16926:2020) to Version 3.50 (this CWA)
Ta slovenski standard je istoveten z: CWA 16926-69:2023
ICS:
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
35.240.15 Identifikacijske kartice. Čipne Identification cards. Chip
kartice. Biometrija cards. Biometrics
35.240.40 Uporabniške rešitve IT v IT applications in banking
bančništvu
SIST CWA 16926-69:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST CWA 16926-69:2023
---------------------- Page: 2 ----------------------
SIST CWA 16926-69:2023
CEN
CWA 16926-69
WORKSHOP
January 2023
AGREEMENT
ICS 35.200; 35.240.15; 35.240.40
English version
Extensions for Financial Services (XFS) interface
specification Release 3.50 - Part 69: Sensors and Indicators
Unit Device Class Interface - Programmer's Reference -
Migration from Version 3.40 (CWA 16926:2020) to
Version 3.50 (this CWA)
This CEN Workshop Agreement has been drafted and approved by a Workshop of representatives of interested parties, the
constitution of which is indicated in the foreword of this Workshop Agreement.
The formal process followed by the Workshop in the development of this Workshop Agreement has been endorsed by the
National Members of CEN but neither the National Members of CEN nor the CEN-CENELEC Management Centre can be held
accountable for the technical content of this CEN Workshop Agreement or possible conflicts with standards or legislation.
This CEN Workshop Agreement can in no way be held as being an official standard developed by CEN and its Members.
This CEN Workshop Agreement is publicly available as a reference document from the CEN Members National Standard Bodies.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.
Ref. No.:CWA 16926-69:2023 E
---------------------- Page: 3 ----------------------
SIST CWA 16926-69:2023
CWA 16926-69:2023 (E)
Table of Contents
European Foreword . 3
1. Introduction . 7
1.1 Background to Release 3.50 . 7
1.2 XFS Service-Specific Programming . 7
2. Sensors and Indicators Unit . 8
2.1 Enhanced Audio Controller Overview . 9
2.2 Enhanced Microphone Controller Overview . 13
3. References . 14
4. Info Commands . 15
4.1 WFS_INF_SIU_STATUS . 15
4.2 WFS_INF_SIU_CAPABILITIES . 26
4.3 WFS_INF_SIU_GET_AUTOSTARTUP_TIME . 37
5. Execute Commands . 39
5.1 WFS_CMD_SIU_ENABLE_EVENTS. 39
5.2 WFS_CMD_SIU_SET_PORTS . 48
5.3 WFS_CMD_SIU_SET_DOOR . 55
5.4 WFS_CMD_SIU_SET_INDICATOR . 56
5.5 WFS_CMD_SIU_SET_AUXILIARY . 58
5.6 WFS_CMD_SIU_SET_GUIDLIGHT . 61
5.7 WFS_CMD_SIU_RESET . 62
5.8 WFS_CMD_SIU_POWER_SAVE_CONTROL . 63
5.9 WFS_CMD_SIU_SET_AUTOSTARTUP_TIME . 64
5.10 WFS_CMD_SIU_SYNCHRONIZE_COMMAND . 66
5.11 WFS_CMD_SIU_SET_GUIDLIGHT_EX . 67
6. Events . 68
6.1 WFS_SRVE_SIU_PORT_STATUS . 68
6.2 WFS_EXEE_SIU_PORT_ERROR . 71
6.3 WFS_SRVE_SIU_POWER_SAVE_CHANGE . 74
7. C - Header file . 75
2
---------------------- Page: 4 ----------------------
SIST CWA 16926-69:2023
CWA 16926-69:20232 (E)
European Foreword
This CEN Workshop Agreement has been developed in accordance with the CEN-CENELEC Guide 29
“CEN/CENELEC Workshop Agreements – The way to rapid consensus” and with the relevant provisions of
CEN/CENELEC Internal Regulations – Part 2. It was approved by a Workshop of representatives of interested parties
on 2022-11-08, the constitution of which was supported by CEN following several public calls for participation, the
first of which was made on 1998-06-24. However, this CEN Workshop Agreement does not necessarily include all
relevant stakeholders.
The final text of this CEN Workshop Agreement was provided to CEN for publication on 2022-11-18.
The following organizations and individuals developed and approved this CEN Workshop Agreement:
• AURIGA SPA
• CIMA SPA
• DIEBOLD NIXDORF SYSTEMS GMBH
• FIS BANKING SOLUTIONS UK LTD (OTS)
• FUJITSU TECHNOLOGY SOLUTIONS
• GLORY LTD
• GRG BANKING EQUIPMENT HK CO LTD
• HITACHI CHANNEL SOLUTIONS CORP
• HYOSUNG TNS INC
• JIANGSU GUOGUANG ELECTRONIC INFORMATION TECHNOLOGY
• KAL
• KEBA HANDOVER AUTOMATION GMBH
• NCR FSG
• NEXUS SOFTWARE
• OBERTHUR CASH PROTECTION
• OKI ELECTRIC INDUSTRY SHENZHEN
• SALZBURGER BANKEN SOFTWARE
• SECURE INNOVATION
• SIGMA SPA
It is possible that some elements of this CEN/CWA may be subject to patent rights. The CEN-CENELEC policy on
patent rights is set out in CEN-CENELEC Guide 8 “Guidelines for Implementation of the Common IPR Policy on
Patents (and other statutory intellectual property rights based on inventions)”. CEN shall not be held responsible for
identifying any or all such patent rights.
The Workshop participants have made every effort to ensure the reliability and accuracy of the technical and non-
technical content of CWA 16926-10, but this does not guarantee, either explicitly or implicitly, its correctness. Users
of CWA 16926-10 should be aware that neither the Workshop participants, nor CEN can be held liable for damages
3
---------------------- Page: 5 ----------------------
SIST CWA 16926-69:2023
CWA 16926-69:20232 (E)
or losses of any kind whatsoever which may arise from its application. Users of CWA 16926-10 do so on their own
responsibility and at their own risk.
The CWA is published as a multi-part document, consisting of:
Part 1: Application Programming Interface (API) - Service Provider Interface (SPI) - Programmer's Reference
Part 2: Service Classes Definition - Programmer's Reference
Part 3: Printer and Scanning Device Class Interface - Programmer's Reference
Part 4: Identification Card Device Class Interface - Programmer's Reference
Part 5: Cash Dispenser Device Class Interface - Programmer's Reference
Part 6: PIN Keypad Device Class Interface - Programmer's Reference
Part 7: Check Reader/Scanner Device Class Interface - Programmer's Reference
Part 8: Depository Device Class Interface - Programmer's Reference
Part 9: Text Terminal Unit Device Class Interface - Programmer's Reference
Part 10: Sensors and Indicators Unit Device Class Interface - Programmer's Reference
Part 11: Vendor Dependent Mode Device Class Interface - Programmer's Reference
Part 12: Camera Device Class Interface - Programmer's Reference
Part 13: Alarm Device Class Interface - Programmer's Reference
Part 14: Card Embossing Unit Device Class Interface - Programmer's Reference
Part 15: Cash-In Module Device Class Interface - Programmer's Reference
Part 16: Card Dispenser Device Class Interface - Programmer's Reference
Part 17: Barcode Reader Device Class Interface - Programmer's Reference
Part 18: Item Processing Module Device Class Interface - Programmer's Reference
Part 19: Biometrics Device Class Interface - Programmer's Reference
Parts 20 - 28: Reserved for future use.
Parts 29 through 47 constitute an optional addendum to this CWA. They define the integration between the SNMP
standard and the set of status and statistical information exported by the Service Providers.
Part 29: XFS MIB Architecture and SNMP Extensions - Programmer’s Reference
Part 30: XFS MIB Device Specific Definitions - Printer Device Class
Part 31: XFS MIB Device Specific Definitions - Identification Card Device Class
Part 32: XFS MIB Device Specific Definitions - Cash Dispenser Device Class
Part 33: XFS MIB Device Specific Definitions - PIN Keypad Device Class
Part 34: XFS MIB Device Specific Definitions - Check Reader/Scanner Device Class
Part 35: XFS MIB Device Specific Definitions - Depository Device Class
Part 36: XFS MIB Device Specific Definitions - Text Terminal Unit Device Class
Part 37: XFS MIB Device Specific Definitions - Sensors and Indicators Unit Device Class
Part 38: XFS MIB Device Specific Definitions - Camera Device Class
Part 39: XFS MIB Device Specific Definitions - Alarm Device Class
Part 40: XFS MIB Device Specific Definitions - Card Embossing Unit Class
Part 41: XFS MIB Device Specific Definitions - Cash-In Module Device Class
Part 42: Reserved for future use.
Part 43: XFS MIB Device Specific Definitions - Vendor Dependent Mode Device Class
Part 44: XFS MIB Application Management
Part 45: XFS MIB Device Specific Definitions - Card Dispenser Device Class
4
---------------------- Page: 6 ----------------------
SIST CWA 16926-69:2023
CWA 16926-69:20232 (E)
Part 46: XFS MIB Device Specific Definitions - Barcode Reader Device Class
Part 47: XFS MIB Device Specific Definitions - Item Processing Module Device Class
Part 48: XFS MIB Device Specific Definitions - Biometrics Device Class
Parts 49 - 60 are reserved for future use.
Part 61: Application Programming Interface (API) - Migration from Version 3.40 (CWA 16296:2020) to Version
3.50 (this CWA) - Service Provider Interface (SPI) - Programmer's Reference
Part 62: Printer and Scanning Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version
3.50 (this CWA) - Programmer's Reference
Part 63: Identification Card Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version
3.50 (this CWA) - Programmer's Reference
Part 64: Cash Dispenser Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50
(this CWA) - Programmer's Reference
Part 65: PIN Keypad Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50 (this
CWA) - Programmer's Reference
Part 66: Check Reader/Scanner Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version
3.50 (this CWA) - Programmer's Reference
Part 67: Depository Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50 (this
CWA) - Programmer's Reference
Part 68: Text Terminal Unit Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version
3.50 (this CWA) - Programmer's Reference
Part 69: Sensors and Indicators Unit Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to
Version 3.50 (this CWA) - Programmer's Reference
Part 70: Vendor Dependent Mode Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to
Version 3.50 (this CWA) - Programmer's Reference
Part 71: Camera Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50 (this
CWA) - Programmer's Reference
Part 72: Alarm Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50 (this CWA)
- Programmer's Reference
Part 73: Card Embossing Unit Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version
3.50 (this CWA) - Programmer's Reference
Part 74: Cash-In Module Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50
(this CWA) - Programmer's Reference
Part 75: Card Dispenser Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50
(this CWA) - Programmer's Reference
Part 76: Barcode Reader Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50
(this CWA) - Programmer's Reference
Part 77: Item Processing Module Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to
Version 3.50 (this CWA) - Programmer's Reference
Part 78: Biometric Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50 (this
CWA) - Programmer's Reference
In addition to these Programmer's Reference specifications, the reader of this CWA is also referred to a
complementary document, called Release Notes. The Release Notes contain clarifications and explanations on the
CWA specifications, which are not requiring functional changes. The current version of the Release Notes is available
online from: https://www.cencenelec.eu/areas-of-work/cen-sectors/digital-society-cen/cwa-download-area/.
The information in this document represents the Workshop's current views on the issues discussed as of the date of
publication. It is provided for informational purposes only and is subject to change without notice. CEN makes no
warranty, express or implied, with respect to this document.
5
---------------------- Page: 7 ----------------------
SIST CWA 16926-69:2023
CWA 16926-69:20232 (E)
Revision History:
3.00 October 18, 2000 Initial Release.
3.10 November 29, 2007 For a description of changes from version 3.00 to version
3.10 see the SIU 3.10 Migration document.
3.20 March 2, 2011 For a description of changes from version 3.10 to version
3.20 see the SIU 3.20 Migration document.
3.30 March 19, 2015 For a description of changes from version 3.20 to version
3.30 see the SIU 3.30 Migration document.
3.40 December 06, 2019 For a description of changes from version 3.30 to version
3.40 see the SIU 3.40 Migration document.
3.50 November 18, 2022 For a description of changes from version 3.40 to version
3.50 see the SIU 3.50 Migration document.
6
---------------------- Page: 8 ----------------------
SIST CWA 16926-69:2023
CWA 16926-69:20232 (E)
1. Introduction
1.1 Background to Release 3.50
The CEN/XFS Workshop aims to promote a clear and unambiguous specification defining a multi-vendor software
interface to financial peripheral devices. The XFS (eXtensions for Financial Services) specifications are developed
within the CEN (European Committee for Standardization/Information Society Standardization System) Workshop
environment. CEN Workshops aim to arrive at a European consensus on an issue that can be published as a CEN
Workshop Agreement (CWA).
The CEN/XFS Workshop encourages the participation of both banks and vendors in the deliberations required to
create an industry standard. The CEN/XFS Workshop achieves its goals by focused sub-groups working
electronically and meeting quarterly.
Release 3.50 of the XFS specification is based on a C API and is delivered with the continued promise for the
protection of technical investment for existing applications. This release of the specification extends the
functionality and capabilities of the existing devices covered by the specification:
• Addition of E2E security
• PIN Password Entry
1.2 XFS Service-Specific Programming
The service classes are defined by their service-specific commands and the associated data structures, error codes,
messages, etc. These commands are used to request functions that are specific to one or more classes of Service
Providers, but not all of them, and therefore are not included in the common API for basic or administration
functions.
When a service-specific command is common among two or more classes of Service Providers, the syntax of the
command is as similar as possible across all services, since a major objective of XFS is to standardize function
codes and structures for the broadest variety of services. For example, using the WFSExecute function, the
commands to read data from various services are as similar as possible to each other in their syntax and data
structures.
In general, the specific command set for a service class is defined as a superset of the specific capabilities likely to
be provided by the developers of the services of that class; thus any particular device will normally support only a
subset of the defined command set.
There are three cases in which a Service Provider may receive a service-specific command that it does not support:
The requested capability is defined for the class of Service Providers by the XFS specification, the particular vendor
implementation of that service does not support it, and the unsupported capability is not considered to be
fundamental to the service. In this case, the Service Provider returns a successful completion, but does no operation.
An example would be a request from an application to turn on a control indicator on a passbook printer; the Service
Provider recognizes the command, but since the passbook printer it is managing does not include that indicator, the
Service Provider does no operation and returns a successful completion to the application.
The requested capability is defined for the class of Service Providers by the XFS specification, the particular vendor
implementation of that service does not support it, and the unsupported capability is considered to be fundamental
to the service. In this case, a WFS_ERR_UNSUPP_COMMAND error for Execute commands or
WFS_ERR_UNSUPP_CATEGORY error for Info commands is returned to the calling application. An example
would be a request from an application to a cash dispenser to retract items where the dispenser hardware does not
have that capability; the Service Provider recognizes the command but, since the cash dispenser it is managing is
unable to fulfil the request, returns this error.
The requested capability is not defined for the class of Service Providers by the XFS specification. In this case, a
WFS_ERR_INVALID_COMMAND error for Execute commands or WFS_ERR_INVALID_CATEGORY error
for Info commands is returned to the calling application.
This design allows implementation of applications that can be used with a range of services that provide differing
subsets of the functionalities that are defined for their service class. Applications may use the WFSGetInfo and
WFSAsyncGetInfo commands to inquire about the capabilities of the service they are about to use, and modify
their behavior accordingly, or they may use functions and then deal with error returns to make decisions as to how
to use the service.
7
---------------------- Page: 9 ----------------------
SIST CWA 16926-69:2023
CWA 16926-69:20232 (E)
2. Sensors and Indicators Unit
This specification describes the functionality of the services provided by the Sensors and Indicators Unit (SIU)
services under WOSA/XFS, by defining the service-specific commands that can be issued, using the WFSGetInfo,
WFSAsyncGetInfo, WFSExecute and WFSAsyncExecute functions.
This section describes the functions provided by a generic Sensors and Indicators Unit service. This service allows
for the operation of the following categories of ports:
• Door sensors, such as cabinet, safe or vandal shield doors.
• Alarm sensors, such as tamper, seismic or heat sensors.
• Generic sensors, such as proximity or ambient light sensors.
• Key switch sensors, such as the ATM operator switch.
• Lamp/sign indicators, such as fascia light or audio indicators.
Note that while the SIU device class provides some basic support for guidance lights, extended guidance
light functionality is specified in the individual device class specifications. Therefore it is recommended
that device guidance lights be supported and controlled via the individual device classes.
• Auxiliary indicators.
• Enhanced Audio Controller, for use by the partially sighted.
In self-service devices, the sensors and indicators unit is capable of dealing with external sensors, such as door
switches, locks, alarms and proximity sensors, as well as external indicators, such as turning on lamps or heating.
8
---------------------- Page: 10 ----------------------
SIST CWA 16926-69:2023
CWA 16926-69:20232 (E)
2.1 Enhanced Audio Controller Overview
The Enhanced Audio Controller is provided to support the requirements of the American Disabilities Act. The
Enhanced Audio Controller device controls how private and public audio are broadcast when a headset is inserted
into/removed from the Audio Jack, and when the Handset is off-hook/on-hook. In the following ‘Privacy Device’ is
used to refer to either the headset or handset. This device allows audio feedback publicly and/or via the consumer’s
Privacy Device (vendor hardware permitting). For privacy, the device allows input to only be directed to the
consumers’ Privacy Device. In ‘auto’ and ‘semi-auto’ mode (and where the vendor’s hardware allows), public
transmission of audio can be automatically inhibited when the consumer’s Privacy Device is activated. In ‘auto’
mode (and where the vendor’s hardware allows), public transmission of audio can be automatically re-activated
when the consumer’s Privacy Device is deactivated.
The Enhanced Audio Controller provides the application with the following information:
• If a Privacy Device is activated (headset connected/handset off the hook).
• Whether the audio output is to the speakers or to the Privacy Device.
• Privacy/public mode: i.e. whether the activation of the Privacy Device automatically switches public audio
on or off.
The device is managed by the sensors WFS_SIU_ENHANCEDAUDIO, WFS_SIU_HANDSETSENSOR, and an
auxiliary WFS_SIU_ENHANCEDAUDIOCONTROL.
The WFS_SIU_ENHANCEDAUDIO sensor is used to:
• Provide information on the presence of the Audio Jack device.
• To report whether a headset is currently attached.
• Report state change events when a headset is inserted or removed.
The WFS_SIU_HANDSETSENSOR sensor is used to:
• Provide information on the presence of the handset device.
• To report whether a handset is currently off the hook.
• Report state change events when a handset is taken off the hook or put on the hook.
The WFS_SIU_ENHANCEDAUDIOCONTROL auxiliary is used to control the behavior of the Enhanced Audio
Controller. It allows the application to:
• Set the mode of the Enhanced Audio Controller - auto mode, semi-auto mode or manual mode.
• Set the state of the Enhanced Audio Controller- public or private.
A full description of auto, semi-auto and manual mode, as well as public and private states is contained in the
following pages.
The following describes the device behavior during auto and manual mode.
Auto Mode
In auto mode, when a consumer activates a Privacy Device, the audio is automatically directed to the Privacy
Device and the audio is no longer sent to the speakers. When the Privacy Device is deactivated, the audio is
redirected to the speakers. If more than one Privacy Device has been activated, audio is not redirected to the
speakers until all Privacy Devices have been deactivated. The following state diagram completely describes the
behavior of the device in auto mode.
State Description
Auto Mode Public Audio output is played through the public speakers only.
Auto Mode Private Audio is played through the consumer’s Privacy Device only.
9
---------------------- Page: 11 ----------------------
SIST CWA 16926-69:2023
CWA 16926-69:20232 (E)
Privacy Device deactivated,
# activated > 0
Privacy Device deactivated
WFS_SIU_PRIVATEAUDIO_AUTO
Privacy Device activated
Auto Mode Auto Mode
Privacy Device deactivated, # activated == 0
Public Private
WFS_SIU_PUBLICAUDIO_AUTO
Privacy Device activated
Auto Mode State Diagram 1
The dashed-line transitions are caused by application calls to WFS_CMD_SIU_SET_PORTS or
WFS_CMD_SIU_SET_AUXILIARY for the WFS_SIU_ENHANCEDAUDIOCONTROL auxiliary with values of
WFS_SIU_PRIVATEAUDIO_AUTO or WFS_SIU_PUBLICAUDIO_AUTO.
Note that some vendor implementations may not have the ability to allow the application to command the Service
Provider to transition between public and private states. To determine if this feature is available, the application can
query the field fwAuxiliaries[WFS_SIU_ENHANCEDAUDIOCONTROL] in the WFSSIUCAPS structure.
10
---------------------- Page: 12 ----------------------
SIST CWA 16926-69:2023
CWA 16926-69:20232 (E)
Semi-Auto Mode
This mode is required to ensure customer sensitive information is not broadcast via the public speakers when the
consumer’s Privacy Device is deliberately or otherwise deactivated.
In semi-auto mode, when a consumer’s Privacy Device is activated, the audio is automatically directed to the
Privacy Device and the audio is no longer sent to the speakers. When the Privacy Device is deactivated the audio
remains directed at the existing interface (i.e. not the speakers). If required, the application must explicitly return
the device to its public state if audio is required via the speakers. The following state diagram completely describes
the behavior of the device in auto mode.
State Description
Semi-Auto Mode Public Audio output is played through the public speakers only.
Semi-Auto Mode Private Audio is played through the consumer’s Privacy Device only.
Privacy Device deactivated
Privacy Device deactivated
WFS_SIU_PRIVATEAUDIO_SEMI_AUTO
Semi-auto Semi-auto
Privacy Device activated
Mode Mode
Public Private
WFS_SIU_PUBLICAUDIO_SEMI_AUTO
Privacy Device activated
Semi-Auto Mode State Diagram 2
The dashed-line transitions are caused by application calls to WFS_CMD_SIU_SET_PORTS or
WFS_CMD_SIU_SET_AUXILIARY for the WFS_SIU_ENHANCEDAUDIOCONTROL auxiliary with values of
WFS_SIU_PRIVATEAUDIO_SEMI_AUTO or WFS_SIU_PUBLICAUDIO_SEMI_AUTO.
Manual Mode
In manual mode, when a consumer’s Privacy Device is activated, the audio remains directed at the existing
interface (i.e. the speaker), The application must explicitly change to the other mode, if required. Note that the
application must explicitly return the device to its public state if audio is required via the speakers. The following
state diagram completely describes the behavior of the device in manual mode.
State Description
Manual Mode Public Audio output is played through the public speakers only.
Manual Mode Private Audio is played through the consumer’s Privacy Device only.
11
---------------------- Page: 13 ----------------------
SIST CWA 16926-69:2023
CWA 16926-69:20232 (E)
Privacy Device activated
Privacy Device activated
WFS_SIU_PRIVATEAUDIO_MANUAL
Manual Manual
Mode Mode
Public Private
WFS_SIU_PUBLICAUDIO_MANUAL
Privacy Device deactivated Privacy Device deactivated
Manual Mode State Diagram 1
The dashed-line transitions are caused by application calls to WFS_CMD_SIU_SET_PORTS or
WFS_CMD_SIU_SET_AUXILIARY for the WFS_SIU_ENHANCEDAUDIOCONTROL auxiliary with values of
WFS_SIU_PRIVATEAUDIO_MANUAL or WFS_SIU_PUBLICAUDIO_MANUAL.
Inter-Mode Behavior
The values described in the previous sections (_AUTO, _SEMI_AUTO, and _MANUAL, etc).) can also be used to
move from one mode to another. This will then change the mode of the device.
Notes:
• Note that if a ve
...
SLOVENSKI STANDARD
SIST-TP CWA 16926-69:2023
01-april-2023
Specifikacija vmesnika razširitev za finančne storitve (XFS), izdaja 3.50 - 69. del:
Senzorji in kazalniki - vmesnik razreda naprave - Referenca za programerje -
Prehod z različice 3.40 (CWA 16926:2020) na različico 3.50 (ta CWA)
Extensions for Financial Services (XFS) interface specification Release 3.50 - Part 69:
Sensors and Indicators Unit Device Class Interface - Programmer's Reference -
Migration from Version 3.40 (CWA 16926:2020) to Version 3.50 (this CWA)
Ta slovenski standard je istoveten z: CWA 16926-69:2023
ICS:
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
35.240.15 Identifikacijske kartice. Čipne Identification cards. Chip
kartice. Biometrija cards. Biometrics
35.240.40 Uporabniške rešitve IT v IT applications in banking
bančništvu
SIST-TP CWA 16926-69:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CWA 16926-69:2023
---------------------- Page: 2 ----------------------
SIST-TP CWA 16926-69:2023
CEN
CWA 16926-69
WORKSHOP
January 2023
AGREEMENT
ICS 35.200; 35.240.15; 35.240.40
English version
Extensions for Financial Services (XFS) interface
specification Release 3.50 - Part 69: Sensors and Indicators
Unit Device Class Interface - Programmer's Reference -
Migration from Version 3.40 (CWA 16926:2020) to
Version 3.50 (this CWA)
This CEN Workshop Agreement has been drafted and approved by a Workshop of representatives of interested parties, the
constitution of which is indicated in the foreword of this Workshop Agreement.
The formal process followed by the Workshop in the development of this Workshop Agreement has been endorsed by the
National Members of CEN but neither the National Members of CEN nor the CEN-CENELEC Management Centre can be held
accountable for the technical content of this CEN Workshop Agreement or possible conflicts with standards or legislation.
This CEN Workshop Agreement can in no way be held as being an official standard developed by CEN and its Members.
This CEN Workshop Agreement is publicly available as a reference document from the CEN Members National Standard Bodies.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.
Ref. No.:CWA 16926-69:2023 E
---------------------- Page: 3 ----------------------
SIST-TP CWA 16926-69:2023
CWA 16926-69:2023 (E)
Table of Contents
European Foreword . 3
1. Introduction . 7
1.1 Background to Release 3.50 . 7
1.2 XFS Service-Specific Programming . 7
2. Sensors and Indicators Unit . 8
2.1 Enhanced Audio Controller Overview . 9
2.2 Enhanced Microphone Controller Overview . 13
3. References . 14
4. Info Commands . 15
4.1 WFS_INF_SIU_STATUS . 15
4.2 WFS_INF_SIU_CAPABILITIES . 26
4.3 WFS_INF_SIU_GET_AUTOSTARTUP_TIME . 37
5. Execute Commands . 39
5.1 WFS_CMD_SIU_ENABLE_EVENTS. 39
5.2 WFS_CMD_SIU_SET_PORTS . 48
5.3 WFS_CMD_SIU_SET_DOOR . 55
5.4 WFS_CMD_SIU_SET_INDICATOR . 56
5.5 WFS_CMD_SIU_SET_AUXILIARY . 58
5.6 WFS_CMD_SIU_SET_GUIDLIGHT . 61
5.7 WFS_CMD_SIU_RESET . 62
5.8 WFS_CMD_SIU_POWER_SAVE_CONTROL . 63
5.9 WFS_CMD_SIU_SET_AUTOSTARTUP_TIME . 64
5.10 WFS_CMD_SIU_SYNCHRONIZE_COMMAND . 66
5.11 WFS_CMD_SIU_SET_GUIDLIGHT_EX . 67
6. Events . 68
6.1 WFS_SRVE_SIU_PORT_STATUS . 68
6.2 WFS_EXEE_SIU_PORT_ERROR . 71
6.3 WFS_SRVE_SIU_POWER_SAVE_CHANGE . 74
7. C - Header file . 75
2
---------------------- Page: 4 ----------------------
SIST-TP CWA 16926-69:2023
CWA 16926-69:20232 (E)
European Foreword
This CEN Workshop Agreement has been developed in accordance with the CEN-CENELEC Guide 29
“CEN/CENELEC Workshop Agreements – The way to rapid consensus” and with the relevant provisions of
CEN/CENELEC Internal Regulations – Part 2. It was approved by a Workshop of representatives of interested parties
on 2022-11-08, the constitution of which was supported by CEN following several public calls for participation, the
first of which was made on 1998-06-24. However, this CEN Workshop Agreement does not necessarily include all
relevant stakeholders.
The final text of this CEN Workshop Agreement was provided to CEN for publication on 2022-11-18.
The following organizations and individuals developed and approved this CEN Workshop Agreement:
• AURIGA SPA
• CIMA SPA
• DIEBOLD NIXDORF SYSTEMS GMBH
• FIS BANKING SOLUTIONS UK LTD (OTS)
• FUJITSU TECHNOLOGY SOLUTIONS
• GLORY LTD
• GRG BANKING EQUIPMENT HK CO LTD
• HITACHI CHANNEL SOLUTIONS CORP
• HYOSUNG TNS INC
• JIANGSU GUOGUANG ELECTRONIC INFORMATION TECHNOLOGY
• KAL
• KEBA HANDOVER AUTOMATION GMBH
• NCR FSG
• NEXUS SOFTWARE
• OBERTHUR CASH PROTECTION
• OKI ELECTRIC INDUSTRY SHENZHEN
• SALZBURGER BANKEN SOFTWARE
• SECURE INNOVATION
• SIGMA SPA
It is possible that some elements of this CEN/CWA may be subject to patent rights. The CEN-CENELEC policy on
patent rights is set out in CEN-CENELEC Guide 8 “Guidelines for Implementation of the Common IPR Policy on
Patents (and other statutory intellectual property rights based on inventions)”. CEN shall not be held responsible for
identifying any or all such patent rights.
The Workshop participants have made every effort to ensure the reliability and accuracy of the technical and non-
technical content of CWA 16926-10, but this does not guarantee, either explicitly or implicitly, its correctness. Users
of CWA 16926-10 should be aware that neither the Workshop participants, nor CEN can be held liable for damages
3
---------------------- Page: 5 ----------------------
SIST-TP CWA 16926-69:2023
CWA 16926-69:20232 (E)
or losses of any kind whatsoever which may arise from its application. Users of CWA 16926-10 do so on their own
responsibility and at their own risk.
The CWA is published as a multi-part document, consisting of:
Part 1: Application Programming Interface (API) - Service Provider Interface (SPI) - Programmer's Reference
Part 2: Service Classes Definition - Programmer's Reference
Part 3: Printer and Scanning Device Class Interface - Programmer's Reference
Part 4: Identification Card Device Class Interface - Programmer's Reference
Part 5: Cash Dispenser Device Class Interface - Programmer's Reference
Part 6: PIN Keypad Device Class Interface - Programmer's Reference
Part 7: Check Reader/Scanner Device Class Interface - Programmer's Reference
Part 8: Depository Device Class Interface - Programmer's Reference
Part 9: Text Terminal Unit Device Class Interface - Programmer's Reference
Part 10: Sensors and Indicators Unit Device Class Interface - Programmer's Reference
Part 11: Vendor Dependent Mode Device Class Interface - Programmer's Reference
Part 12: Camera Device Class Interface - Programmer's Reference
Part 13: Alarm Device Class Interface - Programmer's Reference
Part 14: Card Embossing Unit Device Class Interface - Programmer's Reference
Part 15: Cash-In Module Device Class Interface - Programmer's Reference
Part 16: Card Dispenser Device Class Interface - Programmer's Reference
Part 17: Barcode Reader Device Class Interface - Programmer's Reference
Part 18: Item Processing Module Device Class Interface - Programmer's Reference
Part 19: Biometrics Device Class Interface - Programmer's Reference
Parts 20 - 28: Reserved for future use.
Parts 29 through 47 constitute an optional addendum to this CWA. They define the integration between the SNMP
standard and the set of status and statistical information exported by the Service Providers.
Part 29: XFS MIB Architecture and SNMP Extensions - Programmer’s Reference
Part 30: XFS MIB Device Specific Definitions - Printer Device Class
Part 31: XFS MIB Device Specific Definitions - Identification Card Device Class
Part 32: XFS MIB Device Specific Definitions - Cash Dispenser Device Class
Part 33: XFS MIB Device Specific Definitions - PIN Keypad Device Class
Part 34: XFS MIB Device Specific Definitions - Check Reader/Scanner Device Class
Part 35: XFS MIB Device Specific Definitions - Depository Device Class
Part 36: XFS MIB Device Specific Definitions - Text Terminal Unit Device Class
Part 37: XFS MIB Device Specific Definitions - Sensors and Indicators Unit Device Class
Part 38: XFS MIB Device Specific Definitions - Camera Device Class
Part 39: XFS MIB Device Specific Definitions - Alarm Device Class
Part 40: XFS MIB Device Specific Definitions - Card Embossing Unit Class
Part 41: XFS MIB Device Specific Definitions - Cash-In Module Device Class
Part 42: Reserved for future use.
Part 43: XFS MIB Device Specific Definitions - Vendor Dependent Mode Device Class
Part 44: XFS MIB Application Management
Part 45: XFS MIB Device Specific Definitions - Card Dispenser Device Class
4
---------------------- Page: 6 ----------------------
SIST-TP CWA 16926-69:2023
CWA 16926-69:20232 (E)
Part 46: XFS MIB Device Specific Definitions - Barcode Reader Device Class
Part 47: XFS MIB Device Specific Definitions - Item Processing Module Device Class
Part 48: XFS MIB Device Specific Definitions - Biometrics Device Class
Parts 49 - 60 are reserved for future use.
Part 61: Application Programming Interface (API) - Migration from Version 3.40 (CWA 16296:2020) to Version
3.50 (this CWA) - Service Provider Interface (SPI) - Programmer's Reference
Part 62: Printer and Scanning Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version
3.50 (this CWA) - Programmer's Reference
Part 63: Identification Card Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version
3.50 (this CWA) - Programmer's Reference
Part 64: Cash Dispenser Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50
(this CWA) - Programmer's Reference
Part 65: PIN Keypad Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50 (this
CWA) - Programmer's Reference
Part 66: Check Reader/Scanner Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version
3.50 (this CWA) - Programmer's Reference
Part 67: Depository Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50 (this
CWA) - Programmer's Reference
Part 68: Text Terminal Unit Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version
3.50 (this CWA) - Programmer's Reference
Part 69: Sensors and Indicators Unit Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to
Version 3.50 (this CWA) - Programmer's Reference
Part 70: Vendor Dependent Mode Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to
Version 3.50 (this CWA) - Programmer's Reference
Part 71: Camera Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50 (this
CWA) - Programmer's Reference
Part 72: Alarm Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50 (this CWA)
- Programmer's Reference
Part 73: Card Embossing Unit Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version
3.50 (this CWA) - Programmer's Reference
Part 74: Cash-In Module Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50
(this CWA) - Programmer's Reference
Part 75: Card Dispenser Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50
(this CWA) - Programmer's Reference
Part 76: Barcode Reader Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50
(this CWA) - Programmer's Reference
Part 77: Item Processing Module Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to
Version 3.50 (this CWA) - Programmer's Reference
Part 78: Biometric Device Class Interface - Migration from Version 3.40 (CWA 16296:2020) to Version 3.50 (this
CWA) - Programmer's Reference
In addition to these Programmer's Reference specifications, the reader of this CWA is also referred to a
complementary document, called Release Notes. The Release Notes contain clarifications and explanations on the
CWA specifications, which are not requiring functional changes. The current version of the Release Notes is available
online from: https://www.cencenelec.eu/areas-of-work/cen-sectors/digital-society-cen/cwa-download-area/.
The information in this document represents the Workshop's current views on the issues discussed as of the date of
publication. It is provided for informational purposes only and is subject to change without notice. CEN makes no
warranty, express or implied, with respect to this document.
5
---------------------- Page: 7 ----------------------
SIST-TP CWA 16926-69:2023
CWA 16926-69:20232 (E)
Revision History:
3.00 October 18, 2000 Initial Release.
3.10 November 29, 2007 For a description of changes from version 3.00 to version
3.10 see the SIU 3.10 Migration document.
3.20 March 2, 2011 For a description of changes from version 3.10 to version
3.20 see the SIU 3.20 Migration document.
3.30 March 19, 2015 For a description of changes from version 3.20 to version
3.30 see the SIU 3.30 Migration document.
3.40 December 06, 2019 For a description of changes from version 3.30 to version
3.40 see the SIU 3.40 Migration document.
3.50 November 18, 2022 For a description of changes from version 3.40 to version
3.50 see the SIU 3.50 Migration document.
6
---------------------- Page: 8 ----------------------
SIST-TP CWA 16926-69:2023
CWA 16926-69:20232 (E)
1. Introduction
1.1 Background to Release 3.50
The CEN/XFS Workshop aims to promote a clear and unambiguous specification defining a multi-vendor software
interface to financial peripheral devices. The XFS (eXtensions for Financial Services) specifications are developed
within the CEN (European Committee for Standardization/Information Society Standardization System) Workshop
environment. CEN Workshops aim to arrive at a European consensus on an issue that can be published as a CEN
Workshop Agreement (CWA).
The CEN/XFS Workshop encourages the participation of both banks and vendors in the deliberations required to
create an industry standard. The CEN/XFS Workshop achieves its goals by focused sub-groups working
electronically and meeting quarterly.
Release 3.50 of the XFS specification is based on a C API and is delivered with the continued promise for the
protection of technical investment for existing applications. This release of the specification extends the
functionality and capabilities of the existing devices covered by the specification:
• Addition of E2E security
• PIN Password Entry
1.2 XFS Service-Specific Programming
The service classes are defined by their service-specific commands and the associated data structures, error codes,
messages, etc. These commands are used to request functions that are specific to one or more classes of Service
Providers, but not all of them, and therefore are not included in the common API for basic or administration
functions.
When a service-specific command is common among two or more classes of Service Providers, the syntax of the
command is as similar as possible across all services, since a major objective of XFS is to standardize function
codes and structures for the broadest variety of services. For example, using the WFSExecute function, the
commands to read data from various services are as similar as possible to each other in their syntax and data
structures.
In general, the specific command set for a service class is defined as a superset of the specific capabilities likely to
be provided by the developers of the services of that class; thus any particular device will normally support only a
subset of the defined command set.
There are three cases in which a Service Provider may receive a service-specific command that it does not support:
The requested capability is defined for the class of Service Providers by the XFS specification, the particular vendor
implementation of that service does not support it, and the unsupported capability is not considered to be
fundamental to the service. In this case, the Service Provider returns a successful completion, but does no operation.
An example would be a request from an application to turn on a control indicator on a passbook printer; the Service
Provider recognizes the command, but since the passbook printer it is managing does not include that indicator, the
Service Provider does no operation and returns a successful completion to the application.
The requested capability is defined for the class of Service Providers by the XFS specification, the particular vendor
implementation of that service does not support it, and the unsupported capability is considered to be fundamental
to the service. In this case, a WFS_ERR_UNSUPP_COMMAND error for Execute commands or
WFS_ERR_UNSUPP_CATEGORY error for Info commands is returned to the calling application. An example
would be a request from an application to a cash dispenser to retract items where the dispenser hardware does not
have that capability; the Service Provider recognizes the command but, since the cash dispenser it is managing is
unable to fulfil the request, returns this error.
The requested capability is not defined for the class of Service Providers by the XFS specification. In this case, a
WFS_ERR_INVALID_COMMAND error for Execute commands or WFS_ERR_INVALID_CATEGORY error
for Info commands is returned to the calling application.
This design allows implementation of applications that can be used with a range of services that provide differing
subsets of the functionalities that are defined for their service class. Applications may use the WFSGetInfo and
WFSAsyncGetInfo commands to inquire about the capabilities of the service they are about to use, and modify
their behavior accordingly, or they may use functions and then deal with error returns to make decisions as to how
to use the service.
7
---------------------- Page: 9 ----------------------
SIST-TP CWA 16926-69:2023
CWA 16926-69:20232 (E)
2. Sensors and Indicators Unit
This specification describes the functionality of the services provided by the Sensors and Indicators Unit (SIU)
services under WOSA/XFS, by defining the service-specific commands that can be issued, using the WFSGetInfo,
WFSAsyncGetInfo, WFSExecute and WFSAsyncExecute functions.
This section describes the functions provided by a generic Sensors and Indicators Unit service. This service allows
for the operation of the following categories of ports:
• Door sensors, such as cabinet, safe or vandal shield doors.
• Alarm sensors, such as tamper, seismic or heat sensors.
• Generic sensors, such as proximity or ambient light sensors.
• Key switch sensors, such as the ATM operator switch.
• Lamp/sign indicators, such as fascia light or audio indicators.
Note that while the SIU device class provides some basic support for guidance lights, extended guidance
light functionality is specified in the individual device class specifications. Therefore it is recommended
that device guidance lights be supported and controlled via the individual device classes.
• Auxiliary indicators.
• Enhanced Audio Controller, for use by the partially sighted.
In self-service devices, the sensors and indicators unit is capable of dealing with external sensors, such as door
switches, locks, alarms and proximity sensors, as well as external indicators, such as turning on lamps or heating.
8
---------------------- Page: 10 ----------------------
SIST-TP CWA 16926-69:2023
CWA 16926-69:20232 (E)
2.1 Enhanced Audio Controller Overview
The Enhanced Audio Controller is provided to support the requirements of the American Disabilities Act. The
Enhanced Audio Controller device controls how private and public audio are broadcast when a headset is inserted
into/removed from the Audio Jack, and when the Handset is off-hook/on-hook. In the following ‘Privacy Device’ is
used to refer to either the headset or handset. This device allows audio feedback publicly and/or via the consumer’s
Privacy Device (vendor hardware permitting). For privacy, the device allows input to only be directed to the
consumers’ Privacy Device. In ‘auto’ and ‘semi-auto’ mode (and where the vendor’s hardware allows), public
transmission of audio can be automatically inhibited when the consumer’s Privacy Device is activated. In ‘auto’
mode (and where the vendor’s hardware allows), public transmission of audio can be automatically re-activated
when the consumer’s Privacy Device is deactivated.
The Enhanced Audio Controller provides the application with the following information:
• If a Privacy Device is activated (headset connected/handset off the hook).
• Whether the audio output is to the speakers or to the Privacy Device.
• Privacy/public mode: i.e. whether the activation of the Privacy Device automatically switches public audio
on or off.
The device is managed by the sensors WFS_SIU_ENHANCEDAUDIO, WFS_SIU_HANDSETSENSOR, and an
auxiliary WFS_SIU_ENHANCEDAUDIOCONTROL.
The WFS_SIU_ENHANCEDAUDIO sensor is used to:
• Provide information on the presence of the Audio Jack device.
• To report whether a headset is currently attached.
• Report state change events when a headset is inserted or removed.
The WFS_SIU_HANDSETSENSOR sensor is used to:
• Provide information on the presence of the handset device.
• To report whether a handset is currently off the hook.
• Report state change events when a handset is taken off the hook or put on the hook.
The WFS_SIU_ENHANCEDAUDIOCONTROL auxiliary is used to control the behavior of the Enhanced Audio
Controller. It allows the application to:
• Set the mode of the Enhanced Audio Controller - auto mode, semi-auto mode or manual mode.
• Set the state of the Enhanced Audio Controller- public or private.
A full description of auto, semi-auto and manual mode, as well as public and private states is contained in the
following pages.
The following describes the device behavior during auto and manual mode.
Auto Mode
In auto mode, when a consumer activates a Privacy Device, the audio is automatically directed to the Privacy
Device and the audio is no longer sent to the speakers. When the Privacy Device is deactivated, the audio is
redirected to the speakers. If more than one Privacy Device has been activated, audio is not redirected to the
speakers until all Privacy Devices have been deactivated. The following state diagram completely describes the
behavior of the device in auto mode.
State Description
Auto Mode Public Audio output is played through the public speakers only.
Auto Mode Private Audio is played through the consumer’s Privacy Device only.
9
---------------------- Page: 11 ----------------------
SIST-TP CWA 16926-69:2023
CWA 16926-69:20232 (E)
Privacy Device deactivated,
# activated > 0
Privacy Device deactivated
WFS_SIU_PRIVATEAUDIO_AUTO
Privacy Device activated
Auto Mode Auto Mode
Privacy Device deactivated, # activated == 0
Public Private
WFS_SIU_PUBLICAUDIO_AUTO
Privacy Device activated
Auto Mode State Diagram 1
The dashed-line transitions are caused by application calls to WFS_CMD_SIU_SET_PORTS or
WFS_CMD_SIU_SET_AUXILIARY for the WFS_SIU_ENHANCEDAUDIOCONTROL auxiliary with values of
WFS_SIU_PRIVATEAUDIO_AUTO or WFS_SIU_PUBLICAUDIO_AUTO.
Note that some vendor implementations may not have the ability to allow the application to command the Service
Provider to transition between public and private states. To determine if this feature is available, the application can
query the field fwAuxiliaries[WFS_SIU_ENHANCEDAUDIOCONTROL] in the WFSSIUCAPS structure.
10
---------------------- Page: 12 ----------------------
SIST-TP CWA 16926-69:2023
CWA 16926-69:20232 (E)
Semi-Auto Mode
This mode is required to ensure customer sensitive information is not broadcast via the public speakers when the
consumer’s Privacy Device is deliberately or otherwise deactivated.
In semi-auto mode, when a consumer’s Privacy Device is activated, the audio is automatically directed to the
Privacy Device and the audio is no longer sent to the speakers. When the Privacy Device is deactivated the audio
remains directed at the existing interface (i.e. not the speakers). If required, the application must explicitly return
the device to its public state if audio is required via the speakers. The following state diagram completely describes
the behavior of the device in auto mode.
State Description
Semi-Auto Mode Public Audio output is played through the public speakers only.
Semi-Auto Mode Private Audio is played through the consumer’s Privacy Device only.
Privacy Device deactivated
Privacy Device deactivated
WFS_SIU_PRIVATEAUDIO_SEMI_AUTO
Semi-auto Semi-auto
Privacy Device activated
Mode Mode
Public Private
WFS_SIU_PUBLICAUDIO_SEMI_AUTO
Privacy Device activated
Semi-Auto Mode State Diagram 2
The dashed-line transitions are caused by application calls to WFS_CMD_SIU_SET_PORTS or
WFS_CMD_SIU_SET_AUXILIARY for the WFS_SIU_ENHANCEDAUDIOCONTROL auxiliary with values of
WFS_SIU_PRIVATEAUDIO_SEMI_AUTO or WFS_SIU_PUBLICAUDIO_SEMI_AUTO.
Manual Mode
In manual mode, when a consumer’s Privacy Device is activated, the audio remains directed at the existing
interface (i.e. the speaker), The application must explicitly change to the other mode, if required. Note that the
application must explicitly return the device to its public state if audio is required via the speakers. The following
state diagram completely describes the behavior of the device in manual mode.
State Description
Manual Mode Public Audio output is played through the public speakers only.
Manual Mode Private Audio is played through the consumer’s Privacy Device only.
11
---------------------- Page: 13 ----------------------
SIST-TP CWA 16926-69:2023
CWA 16926-69:20232 (E)
Privacy Device activated
Privacy Device activated
WFS_SIU_PRIVATEAUDIO_MANUAL
Manual Manual
Mode Mode
Public Private
WFS_SIU_PUBLICAUDIO_MANUAL
Privacy Device deactivated Privacy Device deactivated
Manual Mode State Diagram 1
The dashed-line transitions are caused by application calls to WFS_CMD_SIU_SET_PORTS or
WFS_CMD_SIU_SET_AUXILIARY for the WFS_SIU_ENHANCEDAUDIOCONTROL auxiliary with values of
WFS_SIU_PRIVATEAUDIO_MANUAL or WFS_SIU_PUBLICAUDIO_MANUAL.
Inter-Mode Behavior
The values described in the previous sections (_AUTO, _SEMI_AUTO, and _MANUAL, etc).) can also be used to
move from one mode to another. This will then change the mod
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.