SIST EN 438-5:2005
(Main)High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
This Part of EN 438 applies to five classes of flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates, to produce HPL flooring elements. For laminate floor covering applications they meet the surface property requirements specified in EN 13329.
High-pressure decorative flooring laminates are characterised by their high resistance to abrasion, aesthetic qualities and durability. They have good hygienic and anti-static properties and are easy to clean and maintain.
The requirements in this document apply only to the high-pressure laminate, and additional properties will need to be specified in order to define the functional performance of the finished flooring product.
This Part of EN 438 applies only to decorative laminates as defined in Clause 3.
EN 438-2 specifies the methods of test relevant to this part of EN 438.
Dekorative Hochdruck-Schichtpressstoffplatten (HPL) - Platten auf Basis härtbarer Harze (Schichtpressstoffe) - Teil 5: Klassifizierung und Spezifikationen für Schichtpressstoffe für Fußböden mit einer Dicke kleiner 2 mm, vorgesehen zum Verkleben auf ein Trägermaterial
Dieser Teil von prEN 438 gilt für fünf Klassen von dekorativen Schichtpressstoffen mit einer Dicke kleiner 2 mm für Fußböden fest, die zum Verkleben auf Trägermaterialien vorgesehen sind, um HPL-Fußbodenelemente herzustellen. Für Laminatbodenanwendungen erfüllen sie die in EN 13329:2000 festgelegten Anforderungen an die Oberflächeneigenschaften.
Die dekorativen Hochdruck-Schichtpressstoffe für Fußböden sind charakterisiert durch ihre hohe Beständigkeit gegen Abriebbeanspruchung, ästhetische Qualitäten und ihre Dauergebrauchstauglichkeit. Sie besitzen gute hygienische und antistatische Eigenschaften und sind leicht zu reinigen und zu pflegen.
Die Anforderungen in dieser Norm gelten nur für die Hochdruck-Schichtpressstoffe und es wird erforderlich sein, weitere Eigenschaften festzulegen, um die funktionelle Leistungsfähigkeit des fertiggestellten Fußbodenproduktes zu definieren.
Dieser Teil von prEN 438 gilt nur für dekorative Schichtpressstoffe, wie in Abschnitt 3 definiert.
Die für diesen Teil von prEN 438 zutreffenden Prüfverfahren sind in EN 438-2 festgelegt.
Stratifiés décoratifs haute pression (HPL) - Plaques a base de résines thermodurcissables (communément appelées stratifiés) - Partie 5 : Classification et spécifications des stratifiés pour revetement de sols d'épaisseur inférieure a 2 mm destinés a etre collés sur des supports
La présente partie de l'EN 438 spécifie les exigences de performance de cinq types de stratifiés décoratifs haute pression destinés spécialement a etre utilisés comme revetements de sol apres collage sur des supports appropriés.
Les stratifiés décoratifs haute pression pour revetement de sols se caractérisent par leur résistance élevée a l'abrasion, leurs qualités esthétiques et leur durabilité. Ils possedent de bonnes caractéristiques hygiéniques et anti-statiques, tout en étant faciles a nettoyer et a entretenir.
Les exigences prescrites dans la présente norme s'appliquent seulement a la plaque de stratifié haute pression et des caractéristiques supplémentaires devront etre spécifiées pour afin de définir la performance fonctionnelle du produit de revetement de sol fini.
Cette partie de l'EN 438 s'applique exclusivement aux stratifiés décoratifs définis au paragraphe 3. L'EN 438, Partie 2, prescrit les méthodes d'essai correspondant a la présente partie de l'EN 438.
Dekorativni visokotlačni laminati (HPL) - Plošče na osnovi duromernih smol - 5. del: Razvrstitev in specifikacije za talne, manj kot 2 mm debele laminate, namenjene za vezavo na nosilne materiale
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.ODPLQDWHDekorative Hochdruck-Schichtpressstoffplatten (HPL) - Platten auf Basis härtbarer Harze (Schichtpressstoffe) - Teil 5: Klassifizierung und Spezifikationen für Schichtpressstoffe für Fußböden mit einer Dicke kleiner 2 mm, vorgesehen zum Verkleben auf ein TrägermaterialStratifiés décoratifs haute pression (HPL) - Plaques a base de résines thermodurcissables (communément appelées stratifiés) - Partie 5 : Classification et spécifications des stratifiés pour revetement de sols d'épaisseur inférieure a 2 mm destinés a etre collés sur des supportsHigh-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates83.140.20Laminated sheetsICS:Ta slovenski standard je istoveten z:EN 438-5:2005SIST EN 438-5:2005en01-maj-2005SIST EN 438-5:2005SLOVENSKI
STANDARD
SIST EN 438-5:2005
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 438-5
January 2005 ICS 83.140.20 Supersedes EN 438-1:1991, EN 438-2:1991 English version
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
Stratifiés décoratifs haute pression (HPL) - Plaques à base de résines thermodurcissables (communément appelées stratifiés) - Partie 5 : Classification et spécifications des stratifiés pour revêtement de sols d'épaisseur inférieure à 2 mm destinés à être collés sur des supports
Dekorative Hochdruck-Schichtpressstoffplatten (HPL) - Platten auf Basis härtbarer Harze (Schichtpressstoffe) - Teil 5: Klassifizierung und Spezifikationen für Schichtpressstoffe für Fußböden mit einer Dicke kleiner 2 mm, vorgesehen zum Verkleben auf ein Trägermaterial This European Standard was approved by CEN on 16 August 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 438-5:2005: ESIST EN 438-5:2005
EN 438-5:2005 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Term and definition.4 4 Classification system.5 5 Requirements.5 Annex A (informative) Addendum relating to electrostatic properties.10 Bibliography.11
SIST EN 438-5:2005
EN 438-5:2005 (E) 3 Foreword This document (EN 438-5:2005) has been prepared by Technical Committee CEN/TC 249 “Plastics”, the secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2005, and conflicting national standards shall be withdrawn at the latest by July 2005. This document supersedes EN 438-1:1991 and EN 438-2:1991. This Standard consists of seven parts:
Part 1: Introduction and general information Part 2: Determination of properties Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates Part 6: Classification and specifications for Exterior-grade Compact laminates of thickness 2 mm and greater Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 438-5:2005
EN 438-5:2005 (E) 4
1 Scope This Part of EN 438 applies to five classes of flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates, to produce HPL flooring elements. For laminate floor covering applications they meet the surface property requirements specified in EN 13329.
High-pressure decorative flooring laminates are characterised by their high resistance to abrasion, aesthetic qualities and durability. They have good hygienic and anti-static properties and are easy to clean and maintain. The requirements in this document apply only to the high-pressure laminate, and additional properties will need to be specified in order to define the functional performance of the finished flooring product. This Part of EN 438 applies only to decorative laminates as defined in Clause 3. EN 438-2 specifies the methods of test relevant to this part of EN 438. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 438-2, High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties EN 13329,.Laminate floor coverings- Specifications, requirements and test methods EN
316:, Wood fibreboards - Definitions, classification and symbols EN 685:1995, Resilient floor coverings — Classification EN 12721:1997, Furniture — Assessment of surface resistance to wet heat (ISO 4211-2:1993 modified) EN ISO
1183-1:2004, Plastics — Methods for determining the density of non—cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004). 3 Term and definition For the purposes of this document, the following term and definition applies: 3.1
high-pressure decorative flooring grade laminate(s) (HPL) sheet(s) consisting of layers of cellulosic fibrous material (normally paper) impregnated with thermosetting resins and bonded together by the high pressure process described below. The surface layer(s) on one side, having decorative colours or designs, are impregnated with melamine based resins and may contain special surface additives to improve abrasion resistance. The core layers are impregnated with phenolic based resins. The back of the sheet(s) i
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.