Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte (IEC 60384-18:2016)

IEC 60384-18:2007 applies to fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte primarily intended for d.c. applications for use in electronic equipment. It prescribes preferred ratings and characteristics and to select from IEC 60384-1 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification should be of equal or higher performance level, because lower performance levels are not permitted. This second edition cancels and replaces the first edition published in 1993 and its Amendment 1 (1998). This edition constitutes a minor revision related to tables, figures and references.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 18: Rahmenspezifikation - Oberflächenmontierbare Aluminium-Elektrolyt-Kondensatoren mit festen (MnO2) und flüssigen Elektrolyten

Condensateurs fixes utilisés dans les équipements électroniques - Partie 18: Spécification intermédiaire - Condensateurs fixes électrolytiques à l’aluminium pour montage en surface à électrolyte solide (MnO2) et non solide

L'IEC 60384-18:2016 s'applique aux condensateurs fixes électrolytiques à l'aluminium pour montage en surface à électrolyte solide (MnO2) et à électrolyte non solide destinés principalement aux applications en courant continu dans des équipements électroniques. La présente norme a pour objet de prescrire les valeurs assignées et caractéristiques préférentielles et de sélectionner, en se référant à l'IEC 60384-1:2016, les procédures d'assurance de la qualité appropriées, les essais et les méthodes de mesure et de donner les exigences de performances générales pour ce type de condensateur. Il convient que les sévérités et les exigences d'essai prescrites dans les spécifications particulières faisant référence à la présente spécification intermédiaire présentent des niveaux de performances supérieurs ou égaux, parce que les niveaux de performance inférieurs ne sont pas autorisés. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) Révision de la structure fondé sur les Directives ISO/IEC, Partie 2:2011 (sixième édition) dans la mesure du possible, et harmonisation avec d'autres types de documents similaires. b) En outre, révision et de l'Article 4 et des tableaux pour éviter les redondances et les contradictions.

Nespremenljivi kondenzatorji za uporabo v elektronski opremi - 18. del: Področna specifikacija - Nespremenljivi aluminijski elektrolitski kondenzatorji s trdim (MnO2) in netrdim elektrolitom za površinsko montažo (IEC 60384-18:2016)

IEC 60384-18:2007 se uporablja za nespremenljive aluminijske elektrolitske kondenzatorje s trdim (MnO2) in netrdnim elektrolitom za površinsko montažo, ki so namenjeni predvsem za uporabo enosmernega toka v elektronski opremi. Namen tega standarda je predpisati prednostne nazivne vrednosti in lastnosti, izbrati primerne postopke za oceno kakovosti, preskuse in merilne metode iz standarda IEC 60384-1 ter podati splošne zahteve glede zmogljivosti za ta tip kondenzatorja. Preskusne stopnje in zahteve, predpisane v podrobnih specifikacijah, ki se navezujejo na to področno specifikacijo, morajo biti enake ali višje ravni učinkovitosti, kajti nižje ravni niso dovoljene. Druga izdaja razveljavlja in nadomešča prvo izdajo, objavljeno leta 1993, in njeno dopolnilo 1 (1998). Ta izdaja vključuje manjše popravke, povezane s preglednicami, slikami in referencami.

General Information

Status
Published
Publication Date
27-Sep-2016
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
21-Sep-2016
Due Date
26-Nov-2016
Completion Date
28-Sep-2016

RELATIONS

Buy Standard

Standard
SIST EN 60384-18:2016
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 60384-18:2016
01-november-2016
1DGRPHãþD
SIST EN 60384-18:2008
1HVSUHPHQOMLYLNRQGHQ]DWRUML]DXSRUDERYHOHNWURQVNLRSUHPLGHO3RGURþQD

VSHFLILNDFLMD1HVSUHPHQOMLYLDOXPLQLMVNLHOHNWUROLWVNLNRQGHQ]DWRUMLVWUGLP 0Q2

LQQHWUGLPHOHNWUROLWRP]DSRYUãLQVNRPRQWDåR ,(&

Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed

aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid
electrolyte (IEC 60384-18:2016)
Ta slovenski standard je istoveten z: EN 60384-18:2016
ICS:
31.060.50 Aluminijski elektrolitni Aluminium electrolytic
kondenzatorji capacitors
SIST EN 60384-18:2016 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60384-18:2016
---------------------- Page: 2 ----------------------
SIST EN 60384-18:2016
EUROPEAN STANDARD EN 60384-18
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2016
ICS 31.060.50 Supersedes EN 60384-18:2007
English Version
Fixed capacitors for use in electronic equipment - Part 18:
Sectional specification - Fixed aluminium electrolytic surface
mount capacitors with solid (MnO2) and non-solid electrolyte
(IEC 60384-18:2016)

Condensateurs fixes utilisés dans les équipements Festkondensatoren zur Verwendung in Geräten der

électroniques - Partie 18: Spécification intermédiaire - Elektronik - Teil 18: Rahmenspezifikation -

Condensateurs fixes électrolytiques à l'aluminium pour Oberflächenmontierbare Aluminium-Elektrolyt-

montage en surface à électrolyte solide (MnO2) et non Kondensatoren mit festen (MnO2) und flüssigen

solide Elektrolyten
(IEC 60384-18:2016) (IEC 60384-18:2016)

This European Standard was approved by CENELEC on 2016-06-29. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 60384-18:2016 E
---------------------- Page: 3 ----------------------
SIST EN 60384-18:2016
EN 60384-18:2016
European foreword
The text of document 40/2460/FDIS, future edition 3 of IEC 60384-18, prepared by

IEC/TC 40 "Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC

parallel vote and approved by CENELEC as EN 60384-18:2016.
The following dates are fixed:
(dop) 2017-03-29
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-06-29
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60384-18:2007.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such

patent rights.
Endorsement notice

The text of the International Standard IEC 60384-18:2016 was approved by CENELEC as a European

Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 60384-18:2016
EN 60384-18:2016
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:

www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60063 - Preferred number series for resistors and EN 60063 -
capacitors
IEC 60068-1 2013 Environmental testing -- Part 1: General EN 60068-1 2014
and guidance

IEC 60068-2-58 2015 Environmental testing - Part 2-58: Tests - EN 60068-2-58 2015

Test Td: Test methods for solderability,
resistance to dissolution of metallization
and to soldering heat of surface mounting
devices (SMD)
IEC 60384-1 2016 Fixed capacitors for use in electronic EN 60384-1 2016
equipment - Part 1: Generic specification
IEC 60417 - Graphical symbols for use on equipment. - -
Index, survey and compilation of the single
sheets.
IEC 61193-2 2007 Quality assessment systems -- Part 2: EN 61193-2 2007
Selection and use of sampling plans for
inspection of electronic components and
packages
ISO 3 - Preferred numbers; Series of preferred - -
numbers
---------------------- Page: 5 ----------------------
SIST EN 60384-18:2016
---------------------- Page: 6 ----------------------
SIST EN 60384-18:2016
IEC 60384-18
Edition 3.0 2016-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –
Part 18: Sectional specification – Fixed aluminium electrolytic surface mount
capacitors with solid (MnO ) and non-solid electrolyte
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 18: Spécification intermédiaire – Condensateurs fixes électrolytiques à
l’aluminium pour montage en surface à électrolyte solide (MnO ) et non solide
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.060.50 ISBN 978-2-8322-3423-5

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 60384-18:2016
– 2 – IEC 60384-18:2016 © IEC 2016
CONTENTS

FOREWORD ........................................................................................................................5

1 General .........................................................................................................................7

1.1 Scope ...................................................................................................................7

1.2 Object ...................................................................................................................7

1.3 Normative references ............................................................................................7

1.4 Information to be given in a detail specification ......................................................8

1.4.1 General .........................................................................................................8

1.4.2 Outline drawing and dimensions .....................................................................8

1.4.3 Mounting .......................................................................................................8

1.4.4 Ratings and characteristics ............................................................................8

1.4.5 Marking .........................................................................................................9

1.5 Terms and definitions ............................................................................................9

1.6 Marking ................................................................................................................9

1.6.1 General .........................................................................................................9

1.6.2 Information for marking ..................................................................................9

1.6.3 Marking on capacitors ....................................................................................9

1.6.4 Marking on packaging .................................................................................. 10

2 Preferred ratings and characteristics ............................................................................ 10

2.1 Preferred characteristics ..................................................................................... 10

2.2 Preferred values of ratings .................................................................................. 10

2.2.1 Nominal capacitance (C ) ............................................................................ 10

2.2.2 Tolerance on nominal capacitance ............................................................... 10

2.2.3 Rated voltage (U ) ...................................................................................... 10

2.2.4 Category voltage (U ) ................................................................................. 10

2.2.5 Surge voltage .............................................................................................. 11

2.2.6 Rated temperature ....................................................................................... 11

3 Quality assessment procedures ................................................................................... 11

3.1 Primary stage of manufacture .............................................................................. 11

3.2 Structurally similar components ........................................................................... 11

3.3 Certified test records of released lots .................................................................. 11

3.4 Qualification approval procedures ....................................................................... 11

3.4.1 General ....................................................................................................... 11

3.4.2 Qualification approval on the basis of the fixed sample size procedure ......... 11

3.4.3 Tests ........................................................................................................... 12

3.5 Quality conformance inspection ........................................................................... 22

3.5.1 Formation of inspection lots ......................................................................... 22

3.5.2 Test schedule .............................................................................................. 22

3.5.3 Delayed delivery .......................................................................................... 22

3.5.4 Assessment levels ....................................................................................... 22

4 Test and measurement procedures .............................................................................. 23

4.1 Drying ................................................................................................................. 23

4.2 Measuring conditions .......................................................................................... 24

4.3 Mounting ............................................................................................................. 24

4.3.1 General ....................................................................................................... 24

4.3.2 Initial inspections ......................................................................................... 24

4.3.3 Test conditions ............................................................................................ 24

---------------------- Page: 8 ----------------------
SIST EN 60384-18:2016
IEC 60384-18:2016 © IEC 2016 – 3 –

4.3.4 Final inspections .......................................................................................... 24

4.4 Visual examination and check of dimensions ....................................................... 24

4.4.1 General ....................................................................................................... 24

4.4.2 Visual examination and check of dimensions ................................................ 24

4.4.3 Requirements .............................................................................................. 24

4.5 Electrical tests .................................................................................................... 24

4.5.1 Leakage current ........................................................................................... 24

4.5.2 Capacitance ................................................................................................ 25

4.5.3 Tangent of loss angle (tan δ) or equivalent series resistance (ESR) .............. 25

4.5.4 Impedance (if required) ................................................................................ 26

4.6 Resistance to soldering heat ............................................................................... 26

4.6.1 General ....................................................................................................... 26

4.6.2 Test conditions ............................................................................................ 26

4.6.3 Recovery ..................................................................................................... 26

4.6.4 Final inspections and requirements .............................................................. 26

4.7 Solderability ........................................................................................................ 26

4.7.1 General ....................................................................................................... 26

4.7.2 Test conditions ............................................................................................ 27

4.7.3 Final inspections and requirements .............................................................. 27

4.8 Shear test ........................................................................................................... 27

4.8.1 General ....................................................................................................... 27

4.8.2 Final inspections and requirements .............................................................. 27

4.9 Substrate bending test ........................................................................................ 27

4.9.1 General ....................................................................................................... 27

4.9.2 Final inspections and requirements .............................................................. 27

4.10 Rapid change of temperature .............................................................................. 27

4.10.1 General ....................................................................................................... 27

4.10.2 Initial inspections ......................................................................................... 27

4.10.3 Test conditions ............................................................................................ 27

4.10.4 Recovery ..................................................................................................... 27

4.10.5 Final inspections and requirements .............................................................. 27

4.11 Climatic sequence ............................................................................................... 28

4.11.1 General ....................................................................................................... 28

4.11.2 Initial inspections ......................................................................................... 28

4.11.3 Dry heat ....................................................................................................... 28

4.11.4 Damp heat, cyclic, Test Db, first cycle .......................................................... 28

4.11.5 Cold ............................................................................................................ 28

4.11.6 Damp heat, cyclic, Test Db, remaining cycles ............................................... 28

4.11.7 Recovery ..................................................................................................... 28

4.11.8 Final inspections and requirements .............................................................. 28

4.12 Damp heat, steady state ..................................................................................... 28

4.12.1 General ....................................................................................................... 28

4.12.2 Initial inspections ......................................................................................... 28

4.12.3 Test conditions ............................................................................................ 28

4.12.4 Recovery ..................................................................................................... 29

4.12.5 Final inspections and requirements .............................................................. 29

4.13 Characteristics at high and low temperature ........................................................ 29

4.13.1 General ....................................................................................................... 29

---------------------- Page: 9 ----------------------
SIST EN 60384-18:2016
– 4 – IEC 60384-18:2016 © IEC 2016

4.13.2 Inspections and requirements ...................................................................... 29

4.14 Surge voltage ..................................................................................................... 29

4.14.1 General ....................................................................................................... 29

4.14.2 Initial inspections ......................................................................................... 29

4.14.3 Test conditions ............................................................................................ 29

4.14.4 Recovery ..................................................................................................... 29

4.14.5 Final inspections and requirements .............................................................. 30

4.15 Endurance .......................................................................................................... 30

4.15.1 General ....................................................................................................... 30

4.15.2 Initial inspections ......................................................................................... 30

4.15.3 Test conditions ............................................................................................ 30

4.15.4 Recovery ..................................................................................................... 30

4.15.5 Final inspections and requirements .............................................................. 30

4.16 Reverse voltage (if required) ............................................................................... 30

4.16.1 Initial inspections ......................................................................................... 30

4.16.2 Test conditions ............................................................................................ 30

4.16.3 Recovery ..................................................................................................... 31

4.16.4 Final inspections and requirements .............................................................. 31

4.17 Storage at high temperature ................................................................................ 31

4.17.1 General ....................................................................................................... 31

4.17.2 Initial inspections ......................................................................................... 31

4.17.3 Test conditions ............................................................................................ 31

4.17.4 Recovery ..................................................................................................... 31

4.17.5 Final inspections and requirements .............................................................. 31

4.18 Storage at low temperature (if required) .............................................................. 31

4.18.1 General ....................................................................................................... 31

4.18.2 Initial inspections ......................................................................................... 31

4.18.3 Test conditions ............................................................................................ 31

4.18.4 Recovery ..................................................................................................... 31

4.18.5 Final inspections and requirements .............................................................. 31

4.19 Charge and discharge (if required) ...................................................................... 32

4.19.1 General ....................................................................................................... 32

4.19.2 Initial inspections ......................................................................................... 32

4.19.3 Test conditions ............................................................................................ 32

4.19.4 Final inspections and requirements .............................................................. 32

4.20 Component solvent resistance (if required) .......................................................... 32

4.21 Solvent resistance of the marking (if required) ..................................................... 32

4.22 High surge current (if required) ........................................................................... 32

4.22.1 General ....................................................................................................... 32

4.22.2 Final inspections and requirements .............................................................. 33

Table 1 – Surge voltages .................................................................................................... 11

Table 2 – Sampling plan for qualification approval, assessment level EZ ............................. 13

Table 3 – Test schedule for qualification approval (1 of 8) ................................................... 14

Table 4 – Lot-by-lot inspection ............................................................................................ 23

Table 5 – Periodic inspection .............................................................................................. 23

---------------------- Page: 10 ----------------------
SIST EN 60384-18:2016
IEC 60384-18:2016 © IEC 2016 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 18: Sectional specification –
Fixed aluminium electrolytic surface mount capacitors
with solid (MnO ) and non-solid electrolyte
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an

international consensus of opinion on the relevant subjects since each technical committee has representation

from all interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 60384-18 has been prepared by IEC technical committee 40:

Capacitors and resistors for electronic equipment.

This third edition cancels and replaces the second edition published in 2007 and constitutes

a technical revision.

This edition includes the following significant technical changes with respect to the previous

edition:

a) Revision of the structure in accordance with ISO/IEC Directives, Part 2:2011 (sixth

edition) to the extent practicable, and harmonization between other similar kinds of

documents.
---------------------- Page: 11 ----------------------
SIST EN 60384-18:2016
– 6 – IEC 60384-18:2016 © IEC 2016

b) In addition, Clause 4 and all the tables have been reviewed in order to prevent

duplications and contradictions.
The text of this standard is based on the following documents:
FDIS Report on voting
40/2460/FDIS 40/2466/RVD

Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

The list of all parts of the IEC 60384 series, under the general title Fixed capacitors for use in

electronic equipment, can be found on the IEC website.

The committee has decided that the contents of this publication will remain unchanged until

the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data

related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 12 ----------------------
SIST EN 60384-18:2016
IEC 60384-18:2016 © IEC 2016 – 7 –
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 18: Sectional specification –
Fixed aluminium electrolytic surface mount capacitors
with solid (MnO ) and non-solid electrolyte
1 General
1.1 Scope

This part of IEC 60384 applies to fixed aluminium electrolytic surface mount capacitors with

solid (MnO ) and non-solid electrolyte primarily intended for d.c. applications for use in

electronic equipment.
These capacitors are primarily inte
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.