Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities

This Technical Specification provides definitions for the categories of materials produced from end-of-life tyres based on their dimension(s) or impurities. It also provides test methods for the determination of the dimension(s) of the materials produced from all categories of end-of-life tyres at all steps of the treatment process as well as for the determination of impurities. The test methods described in this Technical Specification include sample collection and the preparation of a representative sample based on a sampling plan for the purpose of determining dimensions and impurities. This Technical Specification does not cover the operational performance or fitness for use of the materials which are deemed to be a function of agreement between the producer and the customer.

Materialen aus Altreifen - Festlegung von Klassen anhand ihrer Abmessung(en) und Verunreinigungen und Verfahren zur Bestimmung ihrer Abmessung(en) und Verunreinigungen

Diese Technische Spezifikation liefert Definitionen für Klassen von Materialien aus Altreifen basierend auf deren Abmessung(en) oder Verunreinigungen. Sie liefert ebenfalls Verfahren zur Bestimmung der Abmessung(en) der Materialien, hergestellt aus Altreifen aller Klassen, bei jeder Stufe des Behandlungsprozesses sowie zur Bestimmung der Verunreinigungen.
Die in der Technischen Spezifikation beschriebenen Verfahren enthalten die Probesammlung und die Vorbereitung einer repräsentativen Probe auf Basis eines Probenahmeplans um die Abmessungen und Verunreinigungen zu bestimmen.
Die Technische Spezifikation befasst sich nicht mit der Funktionsfähigkeit und der Eignung der Materialien, welche als Teil der Übereinkunft zwischen Hersteller und Kunde erachtet werden.
Diese Technische Spezifikation erhebt nicht den Anspruch aller Sicherheitsbedenken, falls vorhanden, anzusprechen, die mit der Nutzung der Materialien verbunden sind. Es liegt in der Verantwortlichkeit der Anwender dieser Technischen Spezifikation, vor der Verwendung geeignete Gesundheits- und Sicherheitsvor¬kehrungen zu treffen und die Anwendbarkeit von behördlichen Einschränkungen zu prüfen.

Matériaux produits à partir de pneumatiques en fin de vie - Spécification de catégories basées sur leur(s) dimension(s) et impuretés et méthodes pour déterminer leur(s) dimension(s) et impuretés

La présente Spécification Technique fournit des définitions pour les catégories de matériaux produits à partir
de pneumatiques en fin de vie sur la base de leur(s) dimension(s) ou impuretés. Elle fournit également des
méthodes de détermination de la ou des dimensions des matériaux produits à partir de toutes les catégories
de pneumatiques en fin de vie à toutes les étapes du procédé de traitement ainsi que pour la détermination
d'impuretés.
Les méthodes décrites dans la présente Spécification Technique comprennent la collecte de l’échantillon et la
préparation d’un échantillon représentatif sur la base d’un plan d’échantillonnage afin de déterminer des
dimensions et des impuretés.
La présente Spécification Technique ne couvre pas les performances opérationnelles ou l’aptitude à l’emploi
des matériaux considérées dans le cadre d’un accord entre le fabricant et le client.
La présente Spécification Technique ne traite pas des éventuels problèmes de sécurité associés à son
utilisation. Il incombe à l’utilisateur de la présente Spécification Technique d’établir les bonnes pratiques en
matière de sécurité et d’hygiène et de déterminer l’applicabilité des limitations réglementaires avant utilisation.

Materiali, izdelani iz izrabljenih pnevmatik - Specifikacija kategorij, osnovanih na njihovih merah in nečistočah, in metode za določanje njihovih mer in nečistoč

Ta tehnična specifikacija podaja definicije za kategorije materialov, izdelanih iz izrabljenih pnevmatik, osnovanih na njihovih merah in nečistočah. Podaja tudi metode preskušanja za določevanje mer materialov, ki se izdelujejo iz vseh kategorij izrabljenih pnevmatik, v vseh korakih postopka obdelave, kot tudi za določevanje nečistoč. Metode preskušanja, opisane v tej tehnični specifikaciji, vključujejo zajemanje vzorcev in pripravo reprezentativnega vzorca na osnovi načrta vzorčenja, z namenom določevanja mer in nečistoč. Ta tehnična specifikacija ne zajema operativnih lastnosti ali primernost za uporabo materialov, za katere se šteje, da so stvar dogovora med proizvajalcem in stranko.

General Information

Status
Withdrawn
Publication Date
06-May-2010
Withdrawal Date
20-Feb-2019
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Feb-2019
Due Date
16-Mar-2019
Completion Date
21-Feb-2019

Relations

Buy Standard

Technical specification
TS CEN/TS 14243:2010
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 14243:2010
01-junij-2010
0DWHULDOLL]GHODQLL]L]UDEOMHQLKSQHYPDWLN6SHFLILNDFLMDNDWHJRULMRVQRYDQLKQD
QMLKRYLKPHUDKLQQHþLVWRþDKLQPHWRGH]DGRORþDQMHQMLKRYLKPHULQQHþLVWRþ
Materials produced from end of life tyres - Specification of categories based on their
dimension(s) and impurities and methods for determining their dimension(s) and
impurities
Materialen aus Altreifen - Festlegung von Klassen anhand ihrer Abmessung(en) und
Verunreinigungen und Verfahren zur Bestimmung ihrer Abmessung(en) und
Verunreinigungen
Matériaux produits à partir de pneumatiques en fin de vie - Spécification de catégories
basées sur leur(s) dimension(s) et impuretés et méthodes pour déterminer leur(s)
dimension(s) et impuretés
Ta slovenski standard je istoveten z: CEN/TS 14243:2010
ICS:
13.030.50 Recikliranje Recycling
83.160.01 Avtomobilske pnevmatike na Tyres in general
splošno
SIST-TS CEN/TS 14243:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 14243:2010

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 14243:2010


TECHNICAL SPECIFICATION
CEN/TS 14243

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
April 2010
ICS 13.030.50; 83.160.01 Supersedes CWA 14243:2002
English Version
Materials produced from end of life tyres - Specification of
categories based on their dimension(s) and impurities and
methods for determining their dimension(s) and impurities
Matériaux produits à partir de pneumatiques en fin de vie - Materialen aus Altreifen - Festlegung von Klassen anhand
Spécification de catégories basées sur leur(s) dimension(s) ihrer Abmessung(en) und Verunreinigungen und Verfahren
et impuretés et méthodes pour déterminer leur(s) zur Bestimmung ihrer Abmessung(en) und
dimension(s) et impuretés Verunreinigungen
This Technical Specification (CEN/TS) was approved by CEN on 4 January 2010 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 14243:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 14243:2010
CEN/TS 14243:2010 (E)
Contents Page
Foreword .5
Introduction .6
1 Scope .8
2 Normative references .8
3 Terms and definitions .8
4 Categories of products, based mainly on their dimensions, produced from end-of-life
tyres . 11
4.1 Categories . 11
4.2 Testing programme . 12
5 Determination of dimensions for granulates and powders and for chips considered as
very large granulates . 12
5.1 General . 12
5.2 Preparation of the sampling plan . 12
5.2.1 Principles of correct sampling . 12
5.2.2 General . 13
5.2.3 Sampling plan . 13
5.2.4 Definition of lot size . 13
5.2.5 Sampling point and apparatus . 13
5.2.6 Size of a sample increment . 14
5.2.7 Number of increments . 14
5.2.8 Metrological characteristics of sampling . 14
5.2.9 Visual assessment . 14
5.3 Storage and transport of sample(s) . 15
5.4 Preparation of the laboratory sample(s) and test portion(s) . 15
5.4.1 Principles of correct sample preparation and sample division . 15
5.4.2 Test portion preparation . 15
5.4.3 Apparatus for sample division . 15
5.4.4 Procedure . 16
5.5 Particle size analysis . 16
5.5.1 General principles. 16
5.5.2 Sieves . 16
5.5.3 Flat brush . 17
5.5.4 Mechanical vibrating equipment . 17
5.5.5 Scales . 17
5.5.6 Procedure . 17
5.5.7 Calculation . 17
5.6 Metrological characteristics . 18
5.7 Test Report . 18
6 Determination of dimensions for shreds and cuts and for chips considered as very small
shreds . 18
6.1 Definition of shreds . 18
6.2 Principles of sampling . 19
6.3 Preparation of the sampling plan for determining dimensions . 19
6.4 Procedure for taking the field sample and producing the laboratory sample(s) . 20
6.5 List of symbols and abbreviations . 20
6.6 Principle of determining the dimension(s) . 21
6.7 Equipment . 22
6.8 Procedure for quantification of maximum projected length (manual) . 22
2

---------------------- Page: 4 ----------------------

SIST-TS CEN/TS 14243:2010
CEN/TS 14243:2010 (E)
6.9 Metrological characteristics . 23
6.10 Measurement report . 23
7 Determination of characteristics of the separated fractions steel and textiles . 24
7.1 General . 24
7.2 Preparation of sampling plan for steel and textiles and method for sampling . 24
7.2.1 Principle of sampling . 24
7.2.2 Sampling plan . 24
7.2.3 Definition of a lot and determining lot size . 25
7.2.4 Determination of the number of increments . 25
7.2.5 Determination of minimum sample size . 25
7.2.6 Determination of the minimum increment size . 25
7.3 Handling and storage of samples . 26
7.4 Determination of characteristic of the separated fractions steel and textiles by manual
sorting of all components. 26
7.4.1 General principles . 26
7.4.2 Equipment . 26
7.4.3 Procedure . 26
7.5 Calculation . 27
7.6 Metrological characteristics . 27
7.7 Report . 27
Annex A (normative) Evaluation of protruding filaments for shreds and cuts and chips
considered as very small shreds . 28
A.1 General . 28
A.2 Principle of the evaluation . 28
A.3 Sampling. 28
A.4 List of symbols and abbreviations . 28
A.5 Principle for determining dimension(s) by image analysis . 29
A.6 Equipment . 29
A.7 Procedure . 29
A.8 Metrological characteristics . 30
A.9 Measurement report . 30
Annex B (normative) Determination of free steel content for granulates and powders and chips
considered as very large granulates by the method of magnetic separation . 32
B.1 General . 32
B.2 Principle of the determination . 32
B.3 Sampling. 32
B.4 Equipment . 32
B.5 Procedure . 32
B.6 Calculation . 33
B.7 Metrological characteristics . 33
B.8 Measurement report . 33
Annex C (normative) Determination of free textile content for granulates and powders and chips
considered as very large granulates by the method of the "small ball" agglomeration . 35
C.1 General . 35
C.2 Principle of the determination . 35
C.3 Sampling. 35
C.4 Equipment . 35
C.5 Procedure . 35
C.6 Calculations . 36
C.7 Metrological characteristics . 36
C.8 Measurement report . 36
Annex D (normative) Determination of other impurities content for granulates and powders and
chips considered as very large granulates by the method of a saline solution . 38
D.1 General . 38
D.2 Principle of the determination . 38
D.3 Sampling. 38
D.4 Equipment . 38
3

---------------------- Page: 5 ----------------------

SIST-TS CEN/TS 14243:2010
CEN/TS 14243:2010 (E)
D.5 Procedure . 39
D.6 Calculations . 39
D.7 Metrological characteristics . 39
D.8 Measurement report . 40
Annex E (informative) Example of applications of Clause 7 to steel and textiles . 41
E.1 Example for textiles . 41
E.1.1 Sampling . 41
E.1.2 Sample . 41
E.1.3 Separation of fractions textile, steel, rubber . 41
E.1.4 Separation of steel using hand magnet . 42
E.1.5 Sorted fractions . 42
E.1.6 Results . 42
E.2 Example on steel. 42
E.2.1 Sampling . 42
E.2.2 Sample . 42
E.2.3 Separation of fractions . 43
E.2.4 Separation of steel using hand magnet . 43
E.2.5 Sorted fractions . 43
E.2.6 Results . 44
Annex F (informative) Example of scoop . 45
Annex G (informative) Sieving . 46
Bibliography . 48

4

---------------------- Page: 6 ----------------------

SIST-TS CEN/TS 14243:2010
CEN/TS 14243:2010 (E)
Foreword
This document (CEN/TS 14243:2010) has been prepared by Technical Committee CEN/TC 366 “Project
Committee - Tyre recycling”, the secretariat of which is held by UNI.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/CWA 14243:2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
5

---------------------- Page: 7 ----------------------

SIST-TS CEN/TS 14243:2010
CEN/TS 14243:2010 (E)
Introduction
This Technical Specification is the first in a foreseen series of Technical Specifications. Such series would
cover the testing programmes needed to characterise each product category as shown on the figure below.
Clustomer and/or manufacturer defines the Testing Programme
Typical scheme for a testing programme
and its objectives, which are the Term of Reference
concerning several characteristics
for the testing laboratory(ies)
with testing steps in the field (1-2-3)
and in the laboratory (3-4-5-6-7)
Testing Programme on characteristics A, B, C, D
A = Characteristic of the "dimension" type
B, C = Characteristic of the "content" type
"in the field" D = Characteristic of the "apparent density" type "in the field"
Define the Sampling Plan
1
for Properties A, B, C,D
Take a field sample for characteristic D
Take a field sample for characteristics A, B, C
in accordance with the Sampling Plan
in accordance with the Sampling Plan
2
WORK FILE
WORK FILE
Laboratory sample and record Laboratory sample and record
for characteristics A, B, C for characteristic D
Storage, Transport, Storage, Transport,
3
storage storage
WORK FILE WORK FILE
Test sample and test portion Test sample and test portion Test sample and test portion
preparation for characteristic A preparation for characteristics B, C 4 preparation for characteristic D
WORK FILE WORK FILE WORK FILE
Extraction for characteristics B, C
5
WORK FILE
Quantification for characteristic A Analysis for characteristics B, C Quantification for characteristic D
6
WORK FILE WORK FILE WORK FILE
WORK FILES collection - Production
of the overall Measurements - 7
Testing Report for characteristics A, B, C, D
"in the laboratory" "in the laboratory"
Overall Report of Measurements -
Testing for Properties A, B, C, D
Customer and/or manufacturer evaluates the data
and report against the
Testing Programme Objectives

Figure 1 — Typical scheme for a testing programme concerning several characteristics with testing
steps in the field and in the laboratory
End-of-life tyres consist mainly of passenger and commercial vehicle tyres, and truck tyres manufactured for
distribution in the European market. Products from end-of-life tyres are used as a secondary raw material
finding a wide range of applications. The principal categories of materials from end-of-life tyres are defined on
the basis of their dimension(s) according to this Technical Specification. Determination of additional
dimensions/impurities according to the test methods specified in normative Annexes A, B, C and D may be
performed if required by agreement between the producer and the customer or at the producer's own will.
European Standards are needed for the production, trade and use of the materials from end-of-life tyres. They
are also useful for buyers of materials, regulators, controllers and laboratories.
6

---------------------- Page: 8 ----------------------

SIST-TS CEN/TS 14243:2010
CEN/TS 14243:2010 (E)
The materials produced at different stages of the treatment processes, primarily by size reduction, of end-of-
life tyres are as follows:
 cuts: typically 300 mm and above;
 shreds: typically 20 mm – 400 mm;
 chips: typically 10 mm – 50 mm;
 granulates: typically 0,8 mm – 20 mm;
 powders: typically under 0,8 mm;
 steel;
 textiles.
They may be distinguished mainly according to their dimension(s).
7

---------------------- Page: 9 ----------------------

SIST-TS CEN/TS 14243:2010
CEN/TS 14243:2010 (E)
1 Scope
This Technical Specification provides definitions for the categories of materials produced from end-of-life tyres
based on their dimension(s) or impurities. It also provides test methods for the determination of the
dimension(s) of the materials produced from all categories of end-of-life tyres at all steps of the treatment
process as well as for the determination of impurities.
The test methods described in this Technical Specification include sample collection and the preparation of a
representative sample based on a sampling plan for the purpose of determining dimensions and impurities.
This Technical Specification does not cover the operational performance or fitness for use of the materials
which are deemed to be a function of agreement between the producer and the customer.
NOTE This Technical Specification does not cover downstream products prepared from the materials, including
reclaimed or devulcanized rubber, surface-modified powders and pyrolytic output.
This Technical Specification does not purport to address safety concerns associated with its use. It is the
responsibility of the user of this Technical Specification to establish appropriate safety and health practices
and determine the applicability of regulatory limitations prior to use.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 933-1, Tests for geometrical properties of aggregates ― Part 1: Determination of particle size distribution
― Sieving method
EN 933-2, Tests for geometrical properties of aggregates ― Part 2: Determination of particle size distribution
― Test sieves, nominal size of apertures
ISO 565, Test sieves ― Metal wire cloth, perforated metal plate and electroformed sheet ― Nominal sizes of
openings
ISO 3310-1:2000, Test sieves ― Technical requirements and testing ― Part 1: Test sieves of metal wire cloth
ISO 3310-2:1999, Test sieves ― Technical requirements and testing ― Part 2: Test sieves of perforated
metal plate
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
sample
amount of material taken from a population and intended to provide information on the population
3.2
sub-sample
portion of a sample
3.3
increment
portion of material extracted in a single operation of the sampling device
8

---------------------- Page: 10 ----------------------

SIST-TS CEN/TS 14243:2010
CEN/TS 14243:2010 (E)
[Adapted from ISO 13909:2001 (all parts)]
3.4
characteristic
property which helps to identify or differentiate items of a given population
[ISO 3534-1:2006]
NOTE The characteristic may be either quantitative
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.