SIST EN 303 035-1:2001

• Abstract:

  Definition of requirements for TETRA V+D under R&TTE Directive

• Status: Published
• Publication Date: 30-Nov-2001
• ICS: 33.070.10 - Terrestrial Trunked Radio (TETRA)
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2001
• Due Date: 01-Dec-2001
• Completion Date: 01-Dec-2001
• Mandate: M/284
• Ref Project: ETSI EN 303 035-1 V1.1.1 (2001-06) - Terrestrial Trunked Radio (TETRA) Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE Directive; Part 1: Voice plus Data (V+D)

• Official Journal Project Relation: SIST EN 303 035-1 V1.2.1:2003 - Terrestrial Trunked Radio (TETRA) - Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE Directive - Part 1: Voice plus Data (V+D)
• Effective Date: 25-Jan-2010

SIST EN 303 035-1:2001 is the Slovenian adoption of ETSI EN 303 035-1 V1.1.1 for Terrestrial Trunked Radio (TETRA) equipment. It specifies the technical characteristics and conformance tests for TETRA Voice plus Data (V+D) equipment at the air interface, for equipment intended to satisfy the essential requirements of article 3.2 of the R&TTE Directive.

The standard covers the TETRA V+D part of the interface for Base Station (BS), Mobile Station (MS), DMO Gateway (DM-GATE) and TMO Repeater (TMO-REP) equipment.

What does SIST EN 303 035-1:2001 specify?

SIST EN 303 035-1:2001 specifies the technical requirements for TETRA V+D radio and telecommunication terminal equipment and the tests used to check them. Its scope is the TETRA V+D air interface, with frequency ranges linked to the ERC decisions for emergency and civil access bands.

Annex	What it covers
Annex A	EN Requirements Table (EN-RT) with the requirements by equipment type and layer
Annex B	Declarations on capabilities and parameters supported
Annex C	EN title in the official languages
Annex D	Justifications for requirements
Annex E	Bibliography

The document is organized around general scope and references, definitions and abbreviations, technical requirement specifications, and compliance testing. It also points to companion TETRA standards for the protocol and radio behavior used in the requirement tables.

What are the key requirements of SIST EN 303 035-1:2001?

The standard ties conformance to the declared environmental profile, the relevant TETRA capabilities, and the requirement tables in Annex A. In practice, a supplier must declare what the equipment supports and then prove that the declared functions meet the matching tests.

Environmental and applicability framework

Clause 4.1 says the equipment is assessed against the supplier-declared environmental profile. That matters because the equipment must keep meeting the radio requirements in the intended operating conditions, not only in a single lab setup.

Clause 4.2 uses the EN-RT in Annex A to state which features are applicable and whether a requirement is mandatory or conditional. This is the table a buyer or test lab uses to see what applies to a specific BS, MS, DM-GATE or TMO-REP.

Radio-frequency performance

Clause 4.2.1 covers frequency and channel allocation, including the TETRA bands, duplex spacing, and channel mappings for BCH, CLCH, SCH, TCH, STCH and AACH. This is what keeps the equipment on the right carrier and channel structure.

Clause 4.2.2 covers transmitting functions such as nominal power, power control, modulation accuracy, output power timing, unwanted emissions and intermodulation. For TMO-REP, the separate table also covers output power, out-of-band gain, adjacent-channel power, spurious emissions and wideband noise. In practice, these are the RF tests that show the transmitter stays within spectrum limits and behaves correctly during bursts and switching.

Clause 4.2.3 covers receiving functions such as spurious response rejection, intermodulation response rejection, blocking and unwanted emissions in reception. These checks matter because a receiver must keep working in the presence of strong nearby signals.

Layered control and service behavior

Clause 4.2.4 breaks the control and monitoring requirements down by layer: radio layer, lower MAC, upper MAC, LLC, MLE, MM, CMCE and security functions. This layered structure matters because TETRA behavior is checked both at RF level and at protocol level.

The radio-layer requirements include error rate, dynamic and static reference sensitivity, interference ratios, synchronization burst acquisition and related receiver behavior. The MAC and LLC requirements cover basic link transfer, acknowledged transfer, FCS handling, SDU numbering, retransmission and timers. The MLE and MM requirements cover initial cell selection, cell re-selection, roaming registration and group identity attach/detach. The CMCE requirements cover individual and group call setup, transmission control, call restoration, disconnection and timers such as T301, T302, T303, T306, T307, T308, T310 and T311. Clause 4.2.4.8 also covers security functions for disabling an MS with or without authentication.

What terms does SIST EN 303 035-1:2001 define?

• Terrestrial Trunked Radio (TETRA) - the radio system covered by the standard, used for trunked digital mobile communications.
• Voice plus Data (V+D) - the TETRA mode where voice and data are carried over the V+D air interface.
• Switching and Management Infrastructure (SwMI) - the infrastructure that controls V+D operation and the network side of many procedures.
• Direct Mode GATEway (DM-GATE) - a device that connects a Direct Mode Mobile Station to the TETRA V+D network.
• TMO Repeater (TMO-REP) - a bi-directional RF amplifier/repeater for TETRA Trunked Mode operation.
• Implementation Under Test (IUT) - the equipment being tested against the conformance requirements.

Who uses SIST EN 303 035-1:2001?

Manufacturers and suppliers of TETRA BS, MS, DM-GATE and TMO-REP equipment use this standard to design products and prepare declarations of supported capabilities. Test laboratories use it to run the radio and protocol test suites, including the PICS and PIXIT-based selections.

Quality managers, procurement teams and conformity assessors use it to check whether an item really supports the TETRA V+D features it claims. Network engineers also use it when they need to understand which air-interface behaviors, channels, call controls and mobility functions must be verified.

Which standards are used with SIST EN 303 035-1:2001?

• Directive 1999/5/EC - the R&TTE Directive that provides the legal basis for article 3.2 coverage.
• Council Directive 89/336/EEC - the EMC Directive, mentioned as a related conformity framework.
• Council Directive 73/23/EEC - the LV Directive, mentioned as the safety framework.
• ETSI TS 100 392-2 - the main V+D air interface specification that the requirement tables reference.
• ETSI TS 100 392-7 - the TETRA V+D security specification.
• ETSI TS 100 392-15 - the TETRA frequency bands, duplex spacings and channel numbering specification.
• ETSI TS 100 394-1 - the radio conformance testing specification used for radio test methods, limits and uncertainty handling.
• ETSI ETS 300 394-2-1 / -2 / -3 / -4 - the V+D protocol test suite structure and ATS specifications for NWK, LLC and MAC.
• ETSI ETS 300 394-4-8 / -4-10 - the DMO Gateway test suite structure and ATS used for gateway-related protocol tests.
• ETSI ETS 300 394-5-2 / -5-3 - the security protocol test specification and ATS.
• ETSI TS 101 789-1 - the TMO Repeater requirements, test methods and limits.
• ETSI ETR 028 - the measurement uncertainty reference used for interpreting test results.

What does the SIST EN 303 035-1:2001 document contain?

The document contains detailed EN-RT requirement tables in Annex A and declaration tables in Annex B, both of which drive conformance selection. Clause 5 adds radio and protocol test specifications, including test case indexes, selection expressions and test suite parameter definitions for BS, MS, DM-GATE and TMO-REP.

It also gives the test configuration rules, environmental conditions for testing and the way to interpret measurement results. For radio measurements, it includes a table of maximum measurement uncertainty values, which is what labs use when deciding whether a measured result can be compared fairly with a limit.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Terrestrial Trunked Radio (TETRA) Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE Directive; Part 1: Voice plus Data (V+D)33.070.10Prizemni snopovni radio (TETRA)Terrestrial Trunked Radio (TETRA)ICS:Ta slovenski standard je istoveten z:EN 303 035-1 Version 1.1.1SIST EN 303 035-1:2001en01-december-2001SIST EN 303 035-1:2001SLOVENSKI
STANDARD
ETSIEN303035-1V1.1.1(2001-06)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)TerrestrialTrunkedRadio(TETRA);HarmonizedENforTETRAequipmentcoveringessentialrequirementsunderarticle3.2oftheR&TTEDirective;Part1:VoiceplusData(V+D)SIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)2ReferenceDEN/TETRA-02044-1Keywordsradio,regulation,TETRA,V+DETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]opartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2001.Allrightsreserved.SIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)3ContentsIntellectualPropertyRights.6Foreword.6Introduction.71Scope.92References.93Definitionsandabbreviations.113.1Definitions.113.2Abbreviations.124Technicalrequirementsspecifications.144.1Environmentalprofile.144.2Conformancerequirements.144.2.1Requirementsassociatedwithfrequencyandchannelallocation.154.2.2Requirementsassociatedwithtransmittingfunctions.164.2.3Requirementsassociatedwithreceivingfunctions.174.2.4Requirementsassociatedwithcontrolandmonitoringfunctions.184.2.4.1Requirementsfortheradiolayer.184.2.4.2RequirementsforthelowerMAClayer.194.2.4.3RequirementsfortheupperMAClayer.194.2.4.4RequirementsfortheLLClayer.224.2.4.5RequirementsfortheMLElayer.234.2.4.6RequirementsfortheMMlayer.244.2.4.7RequirementsfortheCMCElayer.254.2.4.8Requirementsforthesecurityfunctions.285Testingforcompliancewithtechnicalrequirements.295.1Environmentalconditionsfortesting.295.2Interpretationofthemeasurementresults.295.3Essentialradiotestsuites.315.3.1Referencetestspecifications.315.3.2Testconfiguration.315.3.3Radiolayertestspecification.325.3.3.1RadiolayertestspecificationforBS,MSandDM-GATE.325.3.3.1.1TestcaseindexforradiolayerforBS,MSandDM-GATE.325.3.3.1.2TestcaseselectionexpressiondefinitionsforradiolayerforBS,MSandDM-GATE.355.3.3.1.3TestsuiteparameterdefinitionsforradiolayerforBS,MSandDM-GATE.365.3.3.2RadiolayertestspecificationforTMO-REP.375.3.3.2.1TestcaseindexforradiolayerforTMO-REP.375.3.3.2.2TestcaseselectionexpressiondefinitionsforradiolayerforTMO-REP.375.3.3.2.3TestsuiteparameterdefinitionsforradiolayerforTMO-REP.375.3.4MAClayertestspecification.385.3.4.1TestsuitestructureforMAClayer.385.3.4.2TestcaseindexforMAClayer.385.3.4.3TestcaseselectionexpressiondefinitionsforMAClayer.395.3.4.4TestsuiteparameterdefinitionsforMAClayer.395.3.5LLClayertestspecification.405.3.5.1TestsuitestructureforLLClayer.405.3.5.2TestcaseindexforLLClayer.405.3.5.3TestcaseselectionexpressiondefinitionsforLLClayer.415.3.5.4TestsuiteparameterdefinitionsforLLClayer.415.3.6MobileLinkEntity(MLE)testspecification.425.3.6.1TestsuitestructureforMobileLinkEntity(MLE).425.3.6.2TestcaseindexforMobileLinkEntity(MLE).425.3.6.3TestcaseselectionexpressiondefinitionsforMobileLinkEntity(MLE).435.3.6.4TestsuiteparameterdefinitionsforMobileLinkEntity(MLE).43SIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)45.3.7MobilityManagement(MM)testspecification.445.3.7.1MobilityManagement(MM)testspecificationforMS.445.3.7.1.1TestsuitestructureforMobilityManagement(MM)forMS.445.3.7.1.2TestcaseindexforMobilityManagement(MM)forMS.445.3.7.1.3TestcaseselectionexpressiondefinitionsforMobilityManagement(MM)forMS.455.3.7.1.4TestsuiteparameterdefinitionsforMobilityManagement(MM)forMS.455.3.7.2MobilityManagement(MM)testspecificationforDM-GATE.465.3.7.2.1TestsuitestructureforMobilityManagement(MM)forDM-GATE.465.3.7.2.2TestcaseindexforMobilityManagement(MM)forDM-GATE.465.3.7.2.3TestcaseselectionexpressiondefinitionsforMobilityManagement(MM)forDM-GATE.465.3.7.2.4TestsuiteparameterdefinitionsforMobilityManagement(MM)forDM-GATE.475.3.8CircuitModeControlEntity(CMCE)testspecification.475.3.8.1CircuitModeControlEntity(CMCE)testspecificationforMS.475.3.8.1.1TestsuitestructureforCircuitModeControlEntity(CMCE)forMS.475.3.8.1.2TestcaseindexforCircuitModeControlEntity(CMCE)forMS.485.3.8.1.3TestcaseselectionexpressiondefinitionsforCircuitModeControlEntity(CMCE)forMS.515.3.8.1.4TestsuiteparameterdefinitionsforCircuitModeControlEntity(CMCE)forMS.515.3.8.2CircuitModeControlEntity(CMCE)testspecificationforDM-GATE.525.3.8.2.1TestsuitestructureforCircuitModeControlEntity(CMCE)forDM-GATE.525.3.8.2.2TestcaseindexforCircuitModeControlEntity(CMCE)forDM-GATE.535.3.8.2.3TestcaseselectionexpressiondefinitionsforCircuitModeControlEntity(CMCE)forDM-GATE.545.3.8.2.4TestsuiteparameterdefinitionsforCircuitModeControlEntity(CMCE)forDM-GATE.545.3.9Securitytestspecification.555.3.9.1TestsuitestructureforV+Dsecurity.555.3.9.2TestcaseindexforV+Dsecurity.555.3.9.3TestcaseselectionexpressiondefinitionsforV+Dsecurity.555.3.9.4TestsuiteparameterdefinitionsforV+Dsecurity.56AnnexA(normative):TheENRequirementsTable(EN-RT).57A.1Generalcapabilitiesofequipment.58A.1.1Typeofequipment.58A.1.2Protocollayers.58A.1.3Modesofoperation.59A.1.4Environmentalprofile.59A.2Radiolayerrequirements.60A.2.1Radiolayercapabilitiesandfeatures.60A.2.2Radiolayerrequirementsassociatedwithfrequencyandchannelallocation.61A.2.3Radiolayerrequirementsassociatedwithtransmittingfunctions.62A.2.4Radiolayerrequirementsassociatedwithreceivingfunctions.64A.2.5Radiolayerrequirementsassociatedwithcontrolandmonitoringfunctions.65A.3MediumAccessControl(MAC)layerrequirements.65A.3.1LowerMAClayer.65A.3.2UpperMAClayer.66A.4LogicalLinkControl(LLC)layerrequirements.69A.5MobileLinkEntity(MLE)requirements.71A.6MobilityManagement(MM)requirements.72A.6.1MMrequirementsforanMS.72A.6.2MMrequirementsforaGateway.73A.7CircuitModeControlEntity(CMCE)requirements.74A.7.1CMCErequirementsforanMS.74A.7.2CMCErequirementsforaGateway.77SIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)5A.8Security.79AnnexB(normative):Declarationsoncapabilitiesandparameterssupported.81B.1Radiolayer.81B.2MediumAccessControl(MAC).82B.3MobileLinkEntity(MLE).82B.4MobilityManagement(MM).83B.5CircuitModeControlEntity(CMCE).83B.6Security.84AnnexC(informative):TheENtitleintheofficiallanguages.85AnnexD(informative):Justificationsforrequirements.86AnnexE(informative):Bibliography.88History.89SIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)6IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisCandidateHarmonizedEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectTerrestrialTrunkedRadio(TETRA).ThepresentdocumentisintendedtobecomeaHarmonizedStandard,thereferenceofwhichwillbepublishedintheOfficialJournaloftheEuropeanCommunitiesreferencingtheDirective1999/5/ECoftheEuropeanParliamentandoftheCouncilof9March1999onradioequipmentandtelecommunicationsterminalequipmentandthemutualrecognitionoftheirconformity("theR&TTEDirective")[1].Thepresentdocumentispart1ofamulti-partdeliverablecoveringHarmonizedENforTETRAequipmentcoveringessentialrequirementsunderarticle3.2oftheR&TTEDirective,asidentifiedbelow:Part1:"VoiceplusData(V+D)";Part2:"DirectModeOperation(DMO)".NationaltranspositiondatesDateofadoptionofthisEN:22June2001DateoflatestannouncementofthisEN(doa):30September2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31March2002DateofwithdrawalofanyconflictingNationalStandard(dow):31March2002SIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)7IntroductionThepresentdocumentispartofasetofstandardsdesignedtofitinamodularstructuretocoverallradioandtelecommunicationsterminalequipmentundertheR&TTEDirective[1].Eachstandardisamoduleinthestructure.Themodularstructureisshowninfigure1.NewstandardsforhumanexposuretoElectromagneticFieldsand,ifneeded,newstandardsforacousticsafetyUseofspectrum*IfneededScopedbyequipmentclassortypeScopedbyfrequencyand/orequipmenttypeDisability*Privacy*Fraud*Noharmtothenetwork*Emergency*Interworkingviathenetwork*Interworkingwiththenetwork*Non-radioRadio(RE)Non-TTETTE3.1b3.23.3c3.3b3.3a3.3d3.3e3.3fRadioProductEMCExistingEMCstandardstobereplacedbyanew,single,multi-partstandardGenericandproductstandardsalsonotifiedunderEMCDirectiveStandardsalsonotifiedunderLVDirective3.1aNewradioharmonizedstandardsSpectrumEMCSafetyFigure1:ModularstructureforthevariousstandardsusedundertheR&TTEDirectiveSIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)8Thelefthandedgeofthefigureshowsthedifferentclausesofarticle3oftheR&TTEDirective[1].Forarticle3.3varioushorizontalboxesareshown.Dottedlinesindicatethatatthetimeofpublicationofthepresentdocument,essentialrequirementsintheseareashavetobeadoptedbytheCommission.Ifsuchessentialrequirementsareadopted,andasfarandaslongastheyareapplicable,theywilljustifyindividualstandardswhosescopeislikelytobespecifiedbyfunctionorinterfacetype.Theverticalboxesshowthestandardsunderarticle3.2fortheuseoftheradiospectrumbyradioequipment.Thescopesofthesestandardsarespecifiedeitherbyfrequency(normallyinthecasewherefrequencybandsareharmonized)orbyradioequipmenttype.Forarticle3.1bthediagramshowsthenewsinglemulti-partproductEMCstandardforradio,andtheexistingcollectionofgenericandproductstandardscurrentlyusedundertheEMCDirective[2].Thepartsofthepresentdocumentwillbecomeavailableinthesecondhalfof2000,andtheexistingseparateproductEMCstandardswillbeuseduntilitisavailable.Forarticle3.1athediagramshowstheexistingsafetystandardscurrentlyusedundertheLVDirective[3]andnewstandardscoveringhumanexposuretoelectromagneticfields.Newstandardscoveringacousticsafetymayalsoberequired.Thebottomofthefigureshowstherelationshipofthestandardstoradioequipmentandtelecommunicationsterminalequipment.Aparticularequipmentmayberadioequipment,telecommunicationsterminalequipmentorboth.Aradiospectrumstandardwillapplyifitisradioequipment.Anarticle3.3standardwillapplyaswellonlyiftherelevantessentialrequirementundertheR&TTEDirective[1]isadoptedbytheCommissionandiftheequipmentinquestioniscoveredbythescopeofthecorrespondingstandard.Thus,dependingonthenatureoftheequipment,theessentialrequirementsundertheR&TTEDirective[1]maybecoveredinasetofstandards.Themodularityprinciplehasbeentakenbecause:-itminimizesthenumberofstandardsneeded.Becauseequipmentmay,infact,havemultipleinterfacesandfunctionsitisnotpracticabletoproduceasinglestandardforeachpossiblecombinationoffunctionsthatmayoccurinanequipment;-itprovidesscopeforstandardstobeadded:-underarticle3.2whennewfrequencybandsareagreed;or-underarticle3.3shouldtheCommissiontakethenecessarydecisionswithoutrequiringalterationofstandardsthatarealreadypublished;-itclarifies,simplifiesandpromotestheusageofHarmonizedStandardsastherelevantmeansofconformityassessment.SIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)91ScopeThepresentdocumentspecifiesthetechnicalcharacteristicstobeprovidedbyTErrestrialTrunkedRadio(TETRA)radioandtelecommunicationsterminalequipment,whichusestheTETRAtechnologyforTrunkedModeOperationattheairinterfacetosupporttheVoiceplusData(V+D)functionality.ThepresentdocumentappliesattheTETRAVoiceplusData(V+D)Airinterfaceofthefollowingradioandtelecommunicationsterminalequipmenttypes:1)TETRABaseStation(BS);2)TETRAMobileStation(MS);3)TETRADMOGateway(DM-GATE);4)TETRATMORepeater(TMO-REP).Itappliestoterminalequipmentoperatingwithinthefrequencyranges,allocatedtoTETRAbytheERCDecisionsERC/DEC/(96)01[21]andERC/DEC/(96)04[22].Theseradioequipmenttypesarecapableofoperatinginalloranypartofthefrequencybandsgivenbelow:Table1:RadiocommunicationsservicefrequencybandsTypeofServiceRadiocommunicationsservicefrequencybands(MHz)UplinkDownlinkEmergencyAccess,ERC/DEC/(96)01[21]380to385390to395CivilAccess,ERC/DEC/(96)04[22]410to420420to430CivilAccess,ERC/DEC/(96)04[22]870to876915to921CivilAccess,ERC/DEC/(96)04[22]450to460460to470CivilAccess,ERC/DEC/(96)04[22]385to390395to399,99ThepresentdocumentisintendedtocovertheprovisionsofDirective1999/5/EC(R&TTEDirective)[1],article3.2,whichstatesthat"….radioequipmentshallbesoconstructedthatiteffectivelyusesthespectrumallocatedtoterrestrial/spaceradiocommunicationsandorbitalresourcessoastoavoidharmfulinterference".Inadditiontothepresentdocument,otherENsthatspecifytechnicalrequirementsinrespectofessentialrequirementsunderotherpartsofarticle3oftheR&TTEDirective[1]willapplytoequipmentwithinthescopeofthepresentdocument.NOTE:AlistofsuchENsisincludedonthewebsitehttp://www.newapproach.org.2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublicationand/oreditionnumberorversionnumber)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.[1]Directive1999/5/ECoftheEuropeanParliamentandoftheCouncilof9March1999onradioequipmentandtelecommunicationsterminalequipmentandthemutualrecognitionoftheirconformity(R&TTEDirective).SIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)10[2]CouncilDirective89/336/EECof3May1989ontheapproximationofthelawsoftheMemberStatesrelatingtoelectromagneticcompatibility(EMCDirective).[3]CouncilDirective73/23/EECof19February1973ontheharmonizationofthelawsofMemberStatesrelatingtoelectricalequipmentdesignedforusewithincertainvoltagelimits(LVDirective).[4]ETSITS100392-2(V2.3.1,2000):"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part2:AirInterface(AI)".[5]ETSITS100392-7(V2.1.1,2000):"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part7:Security".[6]ETSIETS300392-14(Edition1,1997):"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part14:ProtocolImplementationConformanceStatement(PICS)proformaspecification".[7]ETSITS100392-15(V1.1.1,2000):"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part15:TETRAfrequencybands,duplexspacingsandchannelnumbering".[8]ETSITS100394-1(V2.3.1,2000):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part1:Radio".[9]ETSIETS300394-2-1(Edition1,1998):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part2:ProtocoltestingspecificationforVoiceplusData(V+D);Sub-part1:Testsuitestructureandtestpurposes".[10]ETSIETS300394-2-2(Edition1,1998):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part2:ProtocoltestingspecificationforVoiceplusData(V+D);Sub-part2:AbstractTestSuite(ATS)forNetwork(NWK)layer".[11]ETSIETS300394-2-3(Edition1,1998):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part2:ProtocoltestingspecificationforVoiceplusData(V+D);Sub-part3:AbstractTestSuite(ATS)forLogicalLinkControl(LLC)".[12]ETSIETS300394-2-4(Edition1,1998):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part2:ProtocoltestingspecificationforVoiceplusData(V+D);Sub-part4:AbstractTestSuite(ATS)forMediumAccessControl(MAC)".[13]ETSIETS300394-4-8(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part8:Testsuitestructureandtestpurposes(TSS&TP)forDirectModeGateway(DM-GATE)".[14]ETSIETS300394-4-10(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part10:AbstractTestSuite(ATS)forDirectModeGateway(DM-GATE)".[15]ETSIETS300394-5-1(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part5:Security;Sub-part1:ProtocolImplementationConformanceStatement(PICS)proformaspecification".[16]ETSIETS300394-5-2(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part5:Security;Sub-part2:ProtocoltestingspecificationforTETRAsecurity".[17]ETSIETS300394-5-3(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part5:Security;Sub-part3:AbstractTestSuite(ATS)".[18]ETSIETS300396-5(Edition1,2000):"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part5:Gatewayairinterface".[19]ETSIETS300396-8-3(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part3:GatewayAirInterface(AI)".SIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)11[20]ETSITS101789-1(V1.1.1,2000):"TerrestrialTrunkedRadio(TETRA);TMORepeaters;Part1:Requirements,testmethodsandlimits".[21]CEPTERC/DEC/(96)01:"ERCDecisionof7March1996ontheharmonizedfrequencybandtobedesignatedfortheintroductionoftheDigitalLandMobileSystemfortheEmergencyServices".[22]CEPTERC/DEC/(96)04:"ERCDecisionof7March1996onthefrequencybandsfortheintroductionoftheTransEuropeanTrunkedRadioSystem(TETRA)".[23]ETSIETR028(Edition2,1994):"RadioEquipmentandSystems(RES);Uncertaintiesinthemeasurementofmobileradioequipmentcharacteristics".3Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thetermsanddefinitionsgivenintheR&TTEDirective[1]andthefollowingapply.acknowledgeddatatransfer:serviceprovidedbythelayerbelowwhichgivesanacknowledgementbackovertheairinterfacefromthelowerlayerpeerentity.Thisserviceisusedbythelayer3entitiestogetasecuretransmissionincludingre-transmissionsannouncedcellre-selection:cellre-selectionwhereMS-MLEinformstheSwMIbothintheoldcell(leavingcell)andinthenewcell(arrivingcell)thatcellchangeisperformedAssociatedControlCHannel(ACCH):dedicatedsignallingchannelassociatedwithachannelthathasbeenassignedforcircuitmodetraffic.ItcomprisestheFastAssociatedControlCHannel(FACCH),whichusesframes1to18whenthereisnotrafficinagivendirection,ortheSlowAssociatedControlCHannel(SACCH),whichisalwaysavailableinframe18whenthereistrafficattached:aMSissaidtobeattachedtoacellwhentheMSiscampedandregisteredonthecell.TheMSmaybeinidlemode(i.e.notactivelyprocessingatransaction)orinactivemode(i.e.activelyprocessingatransactioninreceptionand/orintransmission).ItistheMM,whichdecideswhenaMSissaidtobeattachedbasiclink:bi-directionalconnectionlesspathbetweenoneorseveralMSandaBS,withaprovisionofbothunacknowledgedandacknowledgedservicesonasinglemessagebasisbroadcast:unidirectionalpointtomulti-pointmodeoftransmissioncellre-selection:actofchangingtheservingcellfromanoldcelltoanewcell.Thecellre-selectionisperformedbyprocedureslocatedintheMLEandintheMAC.Whenthere-selectionismadeandpossibleregistrationisperformed,theMSissaidtobeattachedtothecellcommoncontrolchannels:controlchannelstransmittedbytheinfrastructuretocontroltheMSpopulation.TheycomprisetheMainControlChannel(MCCH)andcommonSecondaryControlChannels(SCCH)DirectModeGATEway(DM-GATE):devicewhichprovidesgatewayconnectivitybetweenaDirectModeMobileStationandtheTETRAV+Dnetwork.ThegatewayprovidestheinterfacebetweenTETRADMOandTETRAV+Dmodedirectset-upsignalling:signallingprocedurewhereimmediatecommunicationcantakeplacebetweenthecallingandthecalleduserswithoutthealertingprocessandwithoutanexplicitresponsefromthecalleduserthathehasansweredduplexfrequencyspacing:fixedfrequencyspacingbetweenupanddownlinkfrequenciesdirectionsenvironmentalprofile:rangeofenvironmentalconditionsunderwhichequipmentwithinthescopeofthepresentdocumentisrequiredtocomplywiththeprovisionsofthepresentdocumentIndividualTETRASubscriberIdentity(ITSI):identityusedtospecifyanindividualTETRAuser.AnITSIcannotbesharedbymultipleusersSIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)12initialcellselection:actofchoosingafirstservingcelltoregisterin.TheinitialcellselectionisperformedbyprocedureslocatedintheMLEandintheMAC.Whenthecellselectionismadeandpossibleregistrationisperformed,theMSissaidtobeattachedtothecellLinearizationCHannels(BLCHandCLCH):channels,whichmaybeusedbytheequipmenttolinearizeitstransmitter.Thelinearizationburstcontainsnousefulbitslogicalchannel:generictermforanydistinctdatapath.LogicalchannelsareconsideredtooperatebetweenlogicalendpointsMainControlChannel(MCCH):principalcommoncontrolchanneltransmittedbytheinfrastructuretocontroltheMSsinacell.Thefrequencyofthemaincarrierforthecellisbroadcastbytheinfrastructure,andtheMCCHislocatedontimeslot1ofthemaincarrieron/offhooksignalling:signallingprocedure,whichincludesanalertingprocesstothecalleduser.Anexplicitresponsefromthecalleduserthathehasanswerediswaitedbeforethecallcanbeset-upRandomChallenge(RAND1,RAND2):randomvaluegeneratedbytheinfrastructuretoauthenticateauserorinanMStoauthenticatetheinfrastructure,respectivelyRandomSeed(RS):randomvalueusedtoderiveasessionauthenticationkeyfromtheauthenticationkeyResponse(RES1,RES2):valuecalculatedintheMSfromRAND1andasessionkeytoprovetheauthenticityofausertotheinfrastructureorbytheinfrastructurefromRAND2andasessionkeytoproveitsauthenticitytoauser,respectivelySecondaryControlChannel(SCCH):controlchannelotherthantheMCCHTETRAEquipmentIdentity(TEI):electronicserialnumberthatispermanentlyembeddedintheTETRAequipmentTMORepeater:bi-directionalRadioFrequency(RF)amplifierwhichcanamplifyandtransmitareceivedMobileStation(MS)signalintheTETRAMStransmitband,simultaneouslyitcanamplifyandtransmitareceivedBaseStation(BS)RFsignalintheTETRABStransmitbandTrunkedModeoperation(TMO):modeofoperationwhereanetworkisusedforcommunicationunacknowledgeddatatransfer:serviceprovidedbythelayerbelowwhichdoesnotgiveanyacknowledgementbacktoovertheairinterfacefromthelowerlayerpeerentityunannouncedcellre-selection:cellre-selectionwheretheMS-MLEdoesnotinformtheoldcell(leavingcell)thatitintendstochangetoanewcell.Onlythenewcell(arrivingcell)isinformedabouttheMS-MLEundeclaredcellre-selection:cellre-selectionwheretheMS-MLEdoesnotinformtheoldcell(leavingcell)northenewcell(arrivingcell)thatcellchangeisperformedusefulpartofaburst:modulationsymboltimesSN0toSNmaxofaburstV+Doperation:modeofoperationwhereMSsmaycommunicateviatheTETRAV+Dairinterface,whichiscontrolledbytheTETRASwitchingandManagementInfrastructure(SwMI)3.2AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:AACHAccessAssignmentCHannelACCHAssociatedControlCHannelATATtachmentATSAbstractTestSuiteBABasiclink,AcknowledgedserviceBCCHBroadcastControlCHannelBIBehaviourInvalidBLCHBasestationLinearizationCHannelBNCHBroadcastNetworkCHannelBSBaseStationSIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)13BSCHBroadcastSynchronizationCHannelBVBehaviourValidCACApabilitytestCCCallControlCLCHCommonLinearizationCHannelCMCircuitModeCMCECircuitModeControlEntityCRCellReselectionCSSCarrierSpecificSignallingDM-GATEDirectModeGATEwayDM-MSDirectModeMobileStationDMODirectModeOperationEMCElectro-MagneticCompatibilityENEuropeanNormeEN-RTENRequirementTableETSEuropeanTelecommunicationStandardFCSFrameCheckSequenceGCGroupCallGSSIGroupShortSubscriberIdentityGWDirectModeGateWayHDHalf-slotDown-linkHUHalf-slotUp-linkICIndividualCallIDIDentityIMPIMPlicitITSIIndividualTETRASubscriberIdentityIUTImplementationUnderTestL3Layer3LALocationAreaLLCLogicalLinkControlLVLowVoltageMAMAintenanceMACMediumAccessControlMCCMobileCountryCodeMCCHMainControlCHannelMCMMinimumControlModeMLEMobileLinkEntityMMMobilityManagementMNCMobileNetworkCodeMNIMobileNetworkIdentityMSMobileStationNBNetworkBroadcastNCMNormalControlModeNWKNetWorKlayerOCOutgoingCallPDPermanentDisablePDUProtocolDataUnitPICSProtocolImplementationConformanceStatementPIXITProtocolImplementationeXtraInformationforTestingR&TTERadioandTelecommunicationsTerminalEquipmentRARandomAccessRAND1RANDomchallenge1REREservedAccess(forMAClayer),orREgistration(forMLElayer),orRadioEquipmentRES2RESponse2RFRadioFrequencyRSRandomSeedRTRequirementsTablesSecondsSCCHSecondaryControlCHannelSCHSignallingCHannelSCH/FSignallingCHannel,Full-slotSCH/HSignallingCHannel,Half-slotSIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)14SDUServiceDataUnitSecSecuritySEDSecureEnable/DisableSSIShortSubscriberIdentitySTCHSTealingCHannelSUSet-UpSwMISwitchingandManagementInfrastructureTCTransmissionControlTCHTrafficCHannelTDTemporaryDisableTEITETRAEquipmentIdentityTETRATErrestrialTrunkedRAdioTITImerTMTETRAMAClayerTMOTrunkedModeOperationTPTestPurposeTSSTestSuiteStructureTTCNTreeandTabularCombinedNotationV+DVoiceandData4Technicalrequirementsspecifications4.1EnvironmentalprofileThetechnicalrequirementsofthepresentdocumentapplyundertheenvironmentalprofileforoperationoftheequipment,whichshalldeclaredbythesupplier.Toavoidunnecessaryinterferenceintheradiospectrum,theequipmentshallcomplywithallthetechnicalrequirementsofthepresentdocumentatalltimeswhenoperatingwithintheboundarylimitsofthedeclaredoperationalenvironmentalprofile.4.2ConformancerequirementsThisclausereferencestheconformancerequirementsbycross-referencetotherequirementsinthestandardsspecifyingTETRA.Italsocontainsareferencetotherelevanttesttoverifycompliancewiththerequirement.NOTE:Thisclausedoesnotspecifytheexactstatus(e.g.mandatoryoroptional)ofthelistedfeatures,servicesandrequirements.ThisisspecifiedintheENRequirementsTables(EN-RT)inannexA.Thefollowingtableheadingsareapplicabletothetablesinthisclause:Requirementreference:Referencefortherequirementwithinthepresentdocument.Standardreference:Referencetoclause(s)inthereferencestandardspecification.Description:Ashortdescriptionoftherequirement.Technicalphenomena:Associatedtechnicalphenomena,asdefinedinannexAofEG201399(seeannexE).Testcaselimitvalue:Forradiolayertables;Referencetotestcaselimitvaluestobeappliedforcomplianceverification.Testmethodreference:Forradiolayertables;Referencetorelevanttestmethodtoperformcomplianceverificationfortherequirement.Testpurposereference:Fornon-radiolayertables;Referencetotestpurposetoassesscompliancewiththerequirement.Testcasereference:Fornon-radiolayertables;Referencetorelevanttestcasetoperformcomplianceverificationfortherequirement.SIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)154.2.1RequirementsassociatedwithfrequencyandchannelallocationTable2:GeneralrequirementsassociatedwithfrequencybandallocationRequirementreferenceStandardreferenceDescriptionTechnicalphenomenaTestcaselimitvalueTestmethodreference4.2.1/1ERC/DEC/(96)01[21]HarmonizedfrequencybandfortheDigitalLandMobileSystemfortheEmergencyServicesFrequencyerror/stability-Implicitbyotherradiolayertesting4.2.1/2ERC/DEC/(96)04[22]FrequencybandsfortheTransEuropeanTrunkedRadioSystem(TETRA)Frequencyerror/stability-ImplicitbyotherradiolayertestingTable3:RequirementsassociatedwithfrequencyandchannelallocationforMS,BSandGatewayRequirementreferenceStandardreference(note1)DescriptionTechnicalphenomenaTestcaselimitvalue(note2)Testmethodreference(note3)4.2.1/36.2FrequencybandsandchannelarrangementsFrequencyerror/stability-Implicitby10.2.1/10.2.24.2.1/4ETSITS100392-15[7],clause5TETRAFrequencybandsFrequencyerror/stability-Implicitby10.2.1/10.2.24.2.1/5ETSITS100392-15[7],clause6DuplexspacingFrequencyerror/stability-Implicitby10.2.1/10.2.24.2.1/67.5BSrequirementforsynchronizationFrequencyerror/stability7.3.2.210.2and10.2.24.2.1/77.6MSrequirementforsynchronizationFrequencyerror/stability7.3.2.2and7.3.4.210.2,10.2.1and10.44.2.1/89.5.2MappingofBCCHandCLCHDesignationofchannels-ImplicitbyMAClayertesting4.2.1/99.5.3MappingofSCHDesignationofchannels-ImplicitbyMAClayertesting4.2.1/109.5.4MappingofTCHandSTCHDesignationofchannels-ImplicitbyCMCElayertesting4.2.1/119.5.5MappingofAACHDesignationofchannels-ImplicitbyMAClayertestingNOTE1:TherequirementsarespecifiedinETSITS100392-2[4]underthegivenclause,exceptwhenotherwisestated.NOTE2:ThetestcaselimitvaluesarespecifiedinETSITS100394-1[8],clause7.NOTE3:ThetestmethodsarespecifiedinETSITS100394-1[8],clauses8to10.SIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)164.2.2RequirementsassociatedwithtransmittingfunctionsTable4:RequirementsassociatedwithtransmittingfunctionsforMS,BSandGatewayRequirementreferenceStandardreference(note1)DescriptionTechnicalphenomenaTestcaselimitvalue(note2)Testmethodreference(note3)4.2.2/16.4.1.1NominalpowerofBStransmittersTransmitterpower7.1.1.28.1and8.1.24.2.2/26.4.1.2NominalpowerofMStransmittersTransmitterpower7.1.1.28.1and8.1.14.2.2/36.4.1.2NominalMSpowercontrollevelsTransmitterpower7.1.1.28.1and8.1.14.2.2/410.2RFpowercontrolTransmitterpower7.3.5.210.54.2.2/510.3.1MeasurementofreceivedsignalstrengthTransmitterpower7.3.5.210.54.2.2/623.4.4.2MSopenlooppowercontrolTransmitterpower7.3.5.210.54.2.2/76.4.2.2.1UnwantedconductedemissionovertheusefulpartoftheburstAdjacentchannelpower7.1.3.28.34.2.2/86.4.2.2.2UnwantedconductedemissionduringtheswitchingtransientsAdjacentchannelpower7.1.4.28.44.2.2/96.4.2.4UnwantedconductedemissionduringCLCHandBLCHAdjacentchannelpower7.1.7.28.7,8.7.1and8.7.24.2.2/106.4.2.3UnwantedconductedemissionfarfromthecarrierSpuriousemissions7.1.5.28.54.2.2/116.4.2.5Unwantedconductedemissioninthenon-transmitstateSpuriousemissions7.2.8.29.84.2.2/126.4.3UnwantedradiatedemissionsSpuriousemissions7.1.6.28.64.2.2/136.4.6.2BStransmitterintermodulationattenuationInter-modulationattenuation7.1.8.2.28.8and8.8.24.2.2/146.4.6.3MStransmitterintermodulationattenuationInter-modulationattenuation7.1.8.2.18.8and8.8.14.2.2/156.4.7Intra-BStransmitterintermodulationattenuationInter-modulationattenuation7.1.8.2.38.8and8.8.34.2.2/166.4.5BSoutputpowertimemaskTransientbehaviourofthetransmitter7.1.1.28.1and8.1.24.2.2/176.4.5MSoutputpowertimemaskTransientbehaviourofthetransmitter7.1.1.28.1and8.1.14.2.2/186.4.5.1BSoutputpowerinnon-activetransmitstateTransientbehaviourofthetransmitter7.1.2.28.24.2.2/196.4.5.2MSoutputpowerinnon-activetransmitstateTransientbehaviourofthetransmitter7.1.2.28.24.2.2/207.4TimingoftransmittedsignalTransientbehaviourofthetransmitter-ImplicitbyMAClayertesting4.2.2/215.2ModulationtypeModulationAccuracy-Implicitby10.1.34.2.2/226.6.1.2ModulationaccuracyModulationAccuracy7.3.1.210.1,10.1.1,10.1.2and10.1.3NOTE1:TherequirementsarespecifiedinETSITS100392-2[4]underthegivenclause.NOTE2:ThetestcaselimitvaluesarespecifiedinETSITS100394-1[8],clause7.NOTE3:ThetestmethodsarespecifiedinETSITS100394-1[8],clauses8to10.SIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)17Table5:RequirementsassociatedwithtransmittingfunctionsforTMOrepeaterRequirementreferenceStandardreference(note1)DescriptionTechnicalphenomenaTestcaselimitvalue(note2)Testmethodreference(note3)4.2.2/234.2.4OutputpowerTransmitterpower5.5.4.35.5.4.24.2.2/244.2.3.2OutofbandgainSpuriousemissions5.5.3.35.5.3.24.2.2/254.2.5AdjacentchannelpowerAdjacentchannelpower5.5.5.35.5.5.24.2.2/264.2.1SpuriousemissionsandwidebandnoiseSpuriousemissions5.5.1.35.5.1.24.2.2/274.2.2IntermodulationattenuationInter-modulationattenuation5.5.2.35.5.2.24.2.2/284.2.6ModulationaccuracyModulationAccuracy5.5.6.35.5.6.2NOTE1:TherequirementsarespecifiedinETSITS101789-1[20]underthegivenclause.NOTE2:ThetestcaselimitvaluesarespecifiedinETSITS101789-1[20]underthegivenclause.NOTE3:ThetestmethodsarespecifiedinETSITS101789-1[20]underthegivenclause.4.2.3RequirementsassociatedwithreceivingfunctionsTable6:RequirementsassociatedwithreceivingfunctionsforMS,BSandGatewayRequirementreferenceStandardreference(note1)DescriptionTechnicalphenomenaTestcaselimitvalue(note2)Testmethodreference(note3)4.2.3/16.5.2.2SpuriousresponserejectionSpuriousresponserejection7.2.6.29.64.2.3/26.5.3.2IntermodulationresponserejectionInter-modulationresponserejection7.2.7.29.7,9.7.1and9.7.24.2.3/36.5.1.2BlockingcharacteristicsBlockingordesensitization7.2.5.29.5,9.5.1and9.5.24.2.3/46.5.4.2UnwantedconductedemissioninreceptionSpuriousemissions7.2.8.29.84.2.3/56.5.5UnwantedradiatedemissionSpuriousemissions7.2.9.29.9NOTE1:TherequirementsarespecifiedinETSITS100392-2[4]underthegivenclause.NOTE2:ThetestcaselimitvaluesarespecifiedinETSITS100394-1[8],clause7.NOTE3:ThetestmethodsarespecifiedinETSITS100394-1[8],clauses8to10.SIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)184.2.4Requirementsassociatedwithcontrolandmonitoringfunctions4.2.4.1RequirementsfortheradiolayerTable7:RequirementsfortheradiolayerassociatedwithcontrolandmonitoringfunctionforMS,BSandGatewayRequirementreferenceStandardreference(note1)DescriptionTechnicalphenomenaTestcaselimitvalue(note2)Testmethodreference(note3)4.2.4.1/16.6.2.1NominalerrorrateNetworkinterfacebiterrors7.2.2.29.2,9.2.1and9.2.24.2.4.1/26.6.2.2DynamicreferencesensitivityperformanceNetworkinterfacebiterrors7.2.3.29.3,9.3.1,9.3.2and9.3.34.2.4.1/36.6.2.2.1BSdynamicreferencesensitivityperformanceNetworkinterfacebiterrors7.2.3.29.3and9.3.24.2.4.1/46.6.2.2.2MSdynamicreferencesensitivityperformanceNetworkinterfacebiterrors7.2.3.29.3and9.3.14.2.4.1/56.6.2.3ReceiverperformanceatreferenceinterferenceratiosNetworkinterfacebiterrors7.2.4.29.4,9.4.1and9.4.24.2.4.1/66.6.2.3.1BSreceiverperformanceatreferenceinterferenceratiosNetworkinterfacebiterrors7.2.4.29.4and9.4.24.2.4.1/76.6.2.3.2MSreceiverperformanceatreferenceinterferenceratiosNetworkinterfacebiterrors7.2.4.29.4and9.4.14.2.4.1/86.6.2.4StaticreferencesensitivityperformanceNetworkinterfacebiterrorsImplicitby7.2.5.2,7.2.6.2and7.2.7.2Implicitby9.5.1,9.5.2,9.6,9.7.1and9.7.24.2.4.1/96.6.2.4.1BSstaticreferencesensitivityperformanceNetworkinterfacebiterrorsImplicitby7.2.5.2,7.2.6.2and7.2.7.2Implicitby9.5.2,9.6,and9.7.24.2.4.1/106.6.2.4.2MSstaticreferencesensitivityperformanceNetworkinterfacebiterrorsImplicitby7.2.5.2,7.2.6.2and7.2.7.2Implicitby9.5.1,9.6and9.7.14.2.4.1/116.6.2.5MSreceiverperformanceforsynchronizationburstacquisitionNetworkinterfacebiterrors-ImplicitbyMAClayertestingNOTE1:TherequirementsarespecifiedinETSITS100392-2[4]underthegivenclause.NOTE2:ThetestcaselimitvaluesarespecifiedinETSITS100394-1[8],clause7.NOTE3:ThetestmethodsarespecifiedinETSITS100394-1[8],clauses8to10.SIST EN 303 035-1:2001

ETSIETSIEN303035-1V1.1.1(2001-06)194.2.4.2RequirementsforthelowerMAClayerTable8:RequirementsforthelowerMAClayerassociatedwithcontrolandmonitoringfunctionforMSandGatewayRequirementreferenceStandardreference(note)DescriptionTechnicalphenomenaTestpurposereferenceTestcasereference4.2.4.2/18.3.1ErrorcontrolschemeforAccessAssignment
...