SIST EN ISO 10545-16:2012
(Main)Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-16:2010)
Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-16:2010)
ISO 10545-16:2010 describes a method for utilizing colour measuring instruments for quantifying the small colour differences between plain coloured ceramic tiles, which are designed to be of uniform and consistent colour. It permits the specification of a maximum acceptable value, which depends only on the closeness of match and not on the nature of the colour difference.
Keramische Fliesen und Platten - Teil 16: Bestimmung kleiner Farbabweichungen (ISO 10545-16:2010)
Dieser Teil von ISO 10545 beschreibt ein Verfahren mit Farbmessgeräten zur quantitativen Bestimmung kleiner Farbabweichungen (Farbabstand) zwischen einfarbig glasierten Fliesen und Platten, die so hergestellt wurden, dass sie eine einheitlich übereinstimmende Farbe haben. Das Verfahren erlaubt die Spezifizierung eines akzeptablen Höchstwertes, der nur von der Nähe der Übereinstimmung und nicht von der Farbe selbst oder der Art der Farbabweichung (Farbabstand) abhängt.
Dieser Teil von ISO 10545 ist nicht anwendbar für Farbvariationen, die aus gestalterischen Gründen hergestellt wurden.
ANMERKUNG Diese Prüfung sollte nur angewendet werden, wenn kleine Farbabweichungen zwischen einfarbig glasierten Fliesen und Platten wichtig für eine Spezifikation sind oder nach Vereinbarung.
Carreaux et dalles céramiques - Partie 16: Détermination de faibles différences de couleur (ISO 10545-16:2010)
L'ISO 10545-16:2010 sp�cifie une m�thode qui utilise des appareils de mesure de couleur pour quantifier de faibles diff�rences de couleur entre carreaux c�ramiques de couleur unie, ces carreaux �tant fabriqu�s pour �tre de couleur uniforme et comparable. Cette m�thode permet de d�finir une valeur acceptable maximale qui d�pend uniquement de la fid�lit� de la conformit� de couleur et non de la nature de la diff�rence de couleur.
Les variations de couleur produites � des fins artistiques ne sont pas couvertes par l'ISO 10545-16:2010.
Keramične ploščice - 16. del: Ugotavljanje majhnih barvnih razlik (ISO 10545-16:2010)
Ta del standarda ISO 10545 opisuje metodo za uporabo instrumentov za merjenje barve, s katero se ugotavlja majhne barvne razlike med navadnimi barvnimi keramičnimi ploščicami, ki naj bi bile enotne in skladne barve. Določi se lahko najvišja sprejemljiva vrednost, ki je odvisna le od stopnje ujemanja in ne od narave barvne razlike. Ta del standarda ISO 10545 se ne uporablja za barvne različice, izdelane za umetniške namene.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10545-16:2012
01-maj-2012
1DGRPHãþD
SIST EN ISO 10545-16:2002
.HUDPLþQHSORãþLFHGHO 8JRWDYOMDQMHPDMKQLKEDUYQLKUD]OLN ,62
Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-16:2010)
Keramische Fliesen und Platten - Teil 16: Bestimmung kleiner Farbabweichungen (ISO
10545-16:2010)
Carreaux et dalles céramiques - Partie 16: Détermination de faibles différences de
couleur (ISO 10545-16:2010)
Ta slovenski standard je istoveten z: EN ISO 10545-16:2012
ICS:
91.100.23 .HUDPLþQHSORãþLFH Ceramic tiles
SIST EN ISO 10545-16:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10545-16:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 10545-16:2012
EUROPEAN STANDARD
EN ISO 10545-16
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2012
ICS 91.100.23 Supersedes EN ISO 10545-16:2000
English Version
Ceramic tiles - Part 16: Determination of small colour differences
(ISO 10545-16:2010)
Carreaux et dalles céramiques - Partie 16: Détermination Keramische Fliesen und Platten - Teil 16: Bestimmung
de faibles différences de couleur (ISO 10545-16:2010) kleiner Farbabweichungen (ISO 10545-16:2010)
This European Standard was approved by CEN on 29 January 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10545-16:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10545-16:2012
EN ISO 10545-16:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10545-16:2012
EN ISO 10545-16:2012 (E)
Foreword
The text of ISO 10545-16:2010 has been prepared by Technical Committee ISO/TC 189 “Ceramic tile” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 10545-16:2012 by
Technical Committee CEN/TC 67 “Ceramic tiles” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at
the latest by August 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10545-16:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10545-16:2010 has been approved by CEN as a EN ISO 10545-16:2012 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10545-16:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 10545-16:2012
INTERNATIONAL ISO
STANDARD 10545-16
Second edition
2010-03-15
Ceramic tiles —
Part 16:
Determination of small colour differences
Carreaux et dalles céramiques —
Partie 16: Détermination de faibles différences de couleur
Reference number
ISO 10545-16:2010(E)
©
ISO 2010
---------------------- Page: 7 ----------------------
SIST EN ISO 10545-16:2012
ISO 10545-16:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 10545-16:2012
ISO 10545-16:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10545-16 was prepared by Technical Committee ISO/TC 189, Ceramic tile.
This second edition cancels and replaces the first edition (ISO 10545-16:1999), 3.5 and 7.2 of which have
been technically revised.
ISO 10545 consists of the following parts, under the general title Ceramic tiles:
⎯ Part 1: Sampling and basis for acceptance
⎯ Part 2: Determination of dimensions and surface quality
⎯ Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density
⎯ Part 4: Determination of modulus of rupture and breaking strength
⎯ Part 5: Determination of impact resistance by measurement of coefficient of restitution
⎯ Part 6: Determination of resistance to deep abrasion for unglazed tiles
⎯ Part 7: Determination of resistance to surface abrasion for glazed tiles
⎯ Part 8: Determination of linear thermal expansion
⎯ Part 9: Determination of resistance to thermal shock
⎯ Part 10: Determination of moisture expansion
⎯ Part 11: Determination of crazing resistance for glazed tiles
⎯ Part 12: Determination of frost resistance
⎯ Part 13: Determination of chemical resistance
⎯ Part 14: Determination of resistance to stains
⎯ Part 15: Determination of lead and cadmium given off by gla
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.