SIST EN 4884:2023
(Main)Aerospace series - Steel X3CrNiMoAl (1.4534) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa
Aerospace series - Steel X3CrNiMoAl (1.4534) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa
This document specifies the requirements relating to:
Steel X3CrNiMoAl (13-8-2)
Vacuum induction melted and consumable electrode remelted
Solution treated and precipitation treated
Bars for machining
a or D ≤ 200 mm
1 200 MPa ≤ Rm ≤ 1 350 MPa
for aerospace applications.
Material no (W.L): 1.4534.
Luft- und Raumfahrt - Stahl X3CrNiMoAl (1.4534) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausscheidungsgehärtet - Stangen für die Bearbeitung - a oder D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa
Dieses Dokument legt die Anforderungen an:
Stahl X3CrNiMoAl (1.4534)
vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen
lösungsgeglüht und ausscheidungsgehärtet
Stangen zur spanenden Bearbeitung
a oder D ≤ 200 mm
1 200 MPa ≤ Rm ≤ 1 350 MPa
für Anwendungen in der Luft und Raumfahrt fest.
Série aérospatiale - Acier X3CrNiMoAl (1.4534) - Élaboré sous vide par induction et refondu à l'électrode consommable - Mis en solution et précipité - Barres pour usinage - a ou D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa
Le présent document spécifie les exigences relatives à :
Acier X3CrNiMoAl (13-8-2)
Élaboré sous vide par induction et refondu à l'électrode consommable
Mis en solution et précipité
Barres pour usinage
a ou D ≤ 200 mm
1 200 MPa ≤ Rm ≤ 1 350 MPa
pour les applications aérospatiales.
No de matériau (W.L) : 1.4534.
Aeronavtika - Jeklo X3CrNiMoAl (1.4534) - Indukcijsko taljeno v vakuumu in pretaljeno s taljivo elektrodo - Topilno žarjena in izločevalno utrjena - Palice za obdelavo - a ali D ≤ 200 mm - 1200 MPa ≤ Rm ≤ 1350 MPa
Ta dokument določa zahteve, ki se navezujejo na:
jeklo X3CrNiMoAl (13-8-2),
indukcijsko taljeno v vakuumu in pretaljeno s taljivo elektrodo,
topilno žarjeno in izločevalno utrjeno,
palice za obdelavo,
a ali D ≤ 200 mm,
1200 MPa ≤ Rm ≤ 1350 MPa,
za uporabo v aeronavtiki.
Št. materiala (W.L): 1.4534.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4884:2023
01-marec-2023
Aeronavtika - Jeklo X3CrNiMoAl (1.4534) - Indukcijsko taljeno v vakuumu in
pretaljeno s taljivo elektrodo - Topilno žarjena in izločevalno utrjena - Palice za
obdelavo - a ali D ≤ 200 mm - 1200 MPa ≤ Rm ≤ 1350 MPa
Aerospace series - Steel X3CrNiMoAl (1.4534) - Vacuum induction melted and
consumable electrode remelted - Solution treated and precipitation treated - Bars for
machining - a or D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa
Luft- und Raumfahrt - Stahl X3CrNiMoAl (1.4534) - Vakuuminduktionserschmolzen und
mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und
ausscheidungsgehärtet - Stangen für die Bearbeitung - a oder D ≤ 200 mm - 1 200 MPa
≤ Rm ≤ 1 350 MPa
Série aérospatiale - Acier X3CrNiMoAl (1.4534) - Élaboré sous vide par induction et
refondu à l'électrode consommable - Mis en solution et précipité - Barres pour usinage -
a ou D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa
Ta slovenski standard je istoveten z: EN 4884:2022
ICS:
49.025.10 Jekla Steels
77.140.60 Jeklene palice in drogovi Steel bars and rods
SIST EN 4884:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4884:2023
---------------------- Page: 2 ----------------------
SIST EN 4884:2023
EN 4884
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 49.025.10
English Version
Aerospace series - Steel X3CrNiMoAl (1.4534) - Vacuum
induction melted and consumable electrode remelted -
Solution treated and precipitation treated - Bars for
machining - a or D 200 mm - 1 200 MPa Rm 1 350
MPa
Série aérospatiale - Acier X3CrNiMoAl (1.4534) - Luft- und Raumfahrt - Stahl X3CrNiMoAl (1.4534) -
Élaboré sous vide par induction et refondu à l'électrode Vakuuminduktionserschmolzen und mit
consommable - Mis en solution et précipité - Barres selbstverzehrender Elektrode umgeschmolzen -
Lösungsgeglüht und ausscheidungsgehärtet - Stangen
pour usinage - a ou D 200 mm - 1 200 MPa Rm 1
350 MPa für die Bearbeitung - a oder D 200 mm - 1 200 MPa
Rm 1 350 MPa
This European Standard was approved by CEN on 22 August 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4884:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4884:2023
EN 4884:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
2
---------------------- Page: 4 ----------------------
SIST EN 4884:2023
EN 4884:2022 (E)
European foreword
This document (EN 4884:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2023, and conflicting national standards shall be
withdrawn at the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such
patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries
...
SLOVENSKI STANDARD
oSIST prEN 4884:2021
01-julij-2021
Aeronavtika - Jeklo X3CrNiMoAl (13-8-2) - Indukcijsko taljeno v vakuumu in
pretaljeno s taljivo elektrodo - Topilno žarjena in izločevalno utrjena - Palice za
obdelavo - a ali D ≤ 200 mm - 1200 MPa ≤ Rm ≤ 1350 MPa
Aerospace series - Steel X3CrNiMoAl (13-8-2) - Vacuum induction melted and
consumable electrode remelted - Solution treated and precipitation treated - Bars for
machining - a or D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa
Luft- und Raumfahrt - Stahl X3CrNiMoAl (13-8-2) - Vakuuminduktionserschmolzen und
mit selbstverzehrender Elektrode umgeschmolzen - Stangen für die Bearbeitung - a oder
D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa
Série aérospatiale - Acier X3CrNiMoAl (13-8-2) - Élaboré sous vide par induction et
refondu à l'électrode consommable - Mis en solution et précipité - Barres pour usinage -
a ou D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa
Ta slovenski standard je istoveten z: prEN 4884
ICS:
49.025.10 Jekla Steels
77.140.60 Jeklene palice in drogovi Steel bars and rods
oSIST prEN 4884:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4884:2021
---------------------- Page: 2 ----------------------
oSIST prEN 4884:2021
DRAFT
EUROPEAN STANDARD
prEN 4884
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2021
ICS 49.025.10
English Version
Aerospace series - Steel X3CrNiMoAl (13-8-2) - Vacuum
induction melted and consumable electrode remelted -
Solution treated and precipitation treated - Bars for
machining - a or D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350
MPa
Série aérospatiale - Acier X3CrNiMoAl (13-8-2) - Luft- und Raumfahrt - Stahl X3CrNiMoAl (13-8-2) -
Élaboré sous vide par induction et refondu à l'électrode Vakuuminduktionserschmolzen und mit
consommable - Mis en solution et précipité - Barres selbstverzehrender Elektrode umgeschmolzen -
pour usinage - a ou D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 Stangen für die Bearbeitung - a oder D ≤ 200 mm - 1
350 MPa
200 MPa ≤ Rm ≤ 1 350 MPa
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4884:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4884:2021
prEN 4884:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
2
---------------------- Page: 4 ----------------------
oSIST prEN 4884:2021
prEN 4884:2021 (E)
European foreword
This document (prEN 4884:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
3
---------------------- Page: 5 ----------------------
oSIST prEN 4884:2021
prEN 4884:2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.