SIST-TS ETSI/TS 103 280 V2.9.1:2023
(Main)Lawful Interception (LI) - Dictionary for common parameters
Lawful Interception (LI) - Dictionary for common parameters
The present document defines a dictionary of parameters that are commonly used in multiple TC LI specifications.
Aside from defining a dictionary, the present document aims to provide technical means for other specifications to use.
It is encouraged to use the present document in the development of new specifications.
It is foreseen that regular maintenance of the present document is required. As such, release management requirements
will be defined.
Before accepting any new common parameter, the present document will provide a set of requirements the parameter
has to comply to in order to become a common parameter.
Zakonito prestrezanje (LI) - Slovar skupnih parametrov
V tem dokumentu je opredeljen slovar parametrov, ki se običajno uporabljajo v specifikacijah TC LI.
Poleg opredelitve slovarja je namen tega dokumenta zagotoviti tehnična sredstva za uporabo drugih specifikacij.
Zaželeno je, da se ta dokument uporablja pri razvoju novih specifikacij.
Predvideno je redno vzdrževanje dokumenta. V tem primeru je treba določiti zahteve za upravljanje objave.
Pred sprejemom novih skupnih parametrov je treba v tem dokumentu določiti zahteve, ki jih mora parameter izpolnjevati, da postane skupni parameter.
General Information
Buy Standard
Standards Content (Sample)
ETSI TS 103 280 V2.9.1 (2022-12)
TECHNICAL SPECIFICATION
Lawful Interception (LI);
Dictionary for common parameters
---------------------- Page: 1 ----------------------
2 ETSI TS 103 280 V2.9.1 (2022-12)
Reference
RTS/LI-00234
Keywords
dictionary, lawful interception, security
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI TS 103 280 V2.9.1 (2022-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Release management . 9
5 Parameter requirements . 9
5.0 Introduction . 9
5.1 Parameter attributes . 10
5.2 Parameter naming conventions . 10
5.3 Technology conventions . 10
6 Parameter dictionary. 11
6.1 LIID . 11
6.2 UTCDateTime . 11
6.3 UTCMicrosecondDateTime . 12
6.4 QualifiedDateTime . 12
6.5 QualifiedMicrosecondDateTime . 12
6.6 InternationalE164 . 12
6.7 IMSI . 13
6.8 IMEI . 13
6.9 IMEICheckDigit . 13
6.10 IMEISV . 13
6.11 IPv4Address . 14
6.12 IPv4CIDR . 14
6.13 IPv6Address . 14
6.14 IPv6CIDR . 14
6.15 IPAddress . 15
6.16 IPCIDR . 15
6.17 TCPPort . 15
6.18 TCPPortRange . 16
6.19 UDPPort . 16
6.20 UDPPortRange . 16
6.21 Port . 17
6.22 PortRange . 17
6.23 IPAddressP ort . 17
6.24 IPAddressPortRange . 18
6.25 MACAddress . 18
6.26 EmailAddress . 18
6.27 UUID . 18
6.28 ISOCountryCode . 19
6.29 ShortString . 19
6.30 LongString . 19
6.31 SIPURI . 19
6.32 TELURI . 19
6.33 WGS84CoordinateDecimal . 20
6.34 WGS84LatitudeDecimal . 20
6.35 WGS84LongitudeDecimal . 20
ETSI
---------------------- Page: 3 ----------------------
4 ETSI TS 103 280 V2.9.1 (2022-12)
6.36 WGS84CoordinateAngular . 21
6.37 WGS84LatitudeAngular . 21
6.38 WGS84LongitudeAngular . 21
6.39 SUPIIMSI . 22
6.40 SUPINAI . 22
6.41 SUCI . 22
6.42 PEIIMEI . 22
6.43 PEIIMEICheckDigit . 23
6.44 PEIIMEISV . 23
6.45 GPSIMSISDN . 23
6.46 GPSINAI . 23
6.47 NAI . 24
6.48 LDID . 24
6.49 InternationalizedEmailAddress . 24
6.50 EUI64 . 24
6.51 CGI . 25
6.52 ECGI . 25
6.53 NCGI . 25
6.54 ICCID . 25
6.55 IPProtocol . 25
7 Technical implementation . 26
7.1 XSD . 26
7.2 ASN.1 . 26
Annex A (normative): XSD definition . 27
Annex B (normative): ASN.1 definition . 31
Annex C (informative): Change Request history . 33
History . 34
ETSI
---------------------- Page: 4 ----------------------
5 ETSI TS 103 280 V2.9.1 (2022-12)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Lawful Interception (LI).
The ASN.1 and XSD technical implementations are both available as an electronic attachment to the present document.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 5 ----------------------
6 ETSI TS 103 280 V2.9.1 (2022-12)
1 Scope
The present document defines a dictionary of parameters that are commonly used in multiple TC LI specifications.
Aside from defining a dictionary, the present document aims to provide technical means for other specifications to use.
It is encouraged to use the present document in the development of new specifications.
It is foreseen that regular maintenance of the present document is required. As such, release management requirements
will be defined.
Before accepting any new common parameter, the present document will provide a set of requirements the parameter
has to comply to in order to become a common parameter.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI TS 102 232-1: "Lawful Interception (LI); Handover Interface and Service-Specific Details
(SSD) for IP delivery; Part 1: Handover specification for IP delivery".
®
[2] W3C Recommendation 5 April 2012: "W3C XML Schema Definition Language (XSD) 1.1
Part 2: Datatypes".
[3] Recommendation ITU-T X.680: "Information technology - Abstract Syntax Notation One
(ASN.1): Specification of basic notation".
[4] Recommendation ITU-T E.164: "The international public telecommunication numbering plan".
[5] Recommendation ITU-T E.212: "The international identification plan for public networks and
subscriptions".
[6] ETSI TS 123 003: "Digital cellular telecommunications system (Phase 2+) (GSM); Universal
Mobile Telecommunications System (UMTS); LTE; 5G; Numbering, addressing and identification
(3GPP TS 23.003)".
[7] ETSI TS 102 657: "Lawful Interception (LI); Retained data handling; Handover interface for the
request and delivery of retained data".
[8] IETF RFC 791: "Internet Protocol".
[9] IETF RFC 4632: "Classless Inter-domain Routing (CIDR): The Internet Address Assignment and
Aggregation Plan".
[10] IETF RFC 8200: "Internet Protocol, Version 6 (IPv6) Specification".
[11] IETF RFC 4291: "IP Version 6 Addressing Architecture".
[12] IETF RFC 793: "Transmission Control Protocol".
[13] IETF RFC 768: "User Datagram Protocol".
ETSI
---------------------- Page: 6 ----------------------
7 ETSI TS 103 280 V2.9.1 (2022-12)
[14] IEEE 802.3™: "IEEE Standard for Ethernet".
[15] IETF RFC 5322: "Internet Message Format".
[16] WHATWG community: "HTML Living standard".
NOTE: Available at https://html.spec.whatwg.org/.
[17] IETF RFC 4122: "A Universally Unique IDentifier (UUID) URN Namespace".
[18] ISO 3166-1: "Codes for the representation of names of countries and their subdivisions -- Part 1:
Country codes".
[19] IEEE 1003.1-2017™: "IEEE Standard for Information Technology--Portable Operating System
Interface (POSIX(TM)) Base Specifications, Issue 7".
[20] ISO/IEC 7812-1:2017: "Identification cards -- Identification of issuers -- Part 1: Numbering
system".
[21] IETF RFC 3261: "SIP: Session Initiation Protocol".
[22] IETF RFC 3966: "The tel URI for Telephone Numbers".
[23] NIMA Technical Report 8350.2: "Department of Defense World Geodetic System 1984, Its
Definition and Relationships With Local Geodetic Systems".
[24] ETSI TS 123 501: "5G; System architecture for the 5G System (5GS) (3GPP TS 23.501)".
[25] ETSI TS 133 501: "5G; Security architecture and procedures for 5G System (3GPP TS 33.501)".
[26] IETF RFC 7542: "The Network Access Identifier".
[27] ETSI TS 124 501: "5G; Non-Access-Stratum (NAS) protocol for 5G System (5GS); Stage 3
(3GPP TS 24.501)".
[28] ETSI TS 103 120: "Lawful Interception (LI); Interface for warrant information".
®
[29] W3C Recommendation 16 August 2006: "Extensible Markup Language (XML) 1.1 (Second
Edition)".
[30] IETF RFC 6530: "Overview and Framework for Internationalized Email".
[31] IETF RFC 7042: "IANA Considerations and IETF Protocol and Documentation Usage for IEEE
802 Parameters".
[32] ETSI TS 102 221: "Smart Cards; UICC-Terminal interface; Physical and logical characteristics".
[33] ETSI TS 129 571: "5G; 5G System; Common Data Types for Service Based Interfaces; Stage 3
(3GPP TS 29.571)".
[34] IANA: "Assigned Internet Protocol Numbers".
NOTE: Available at https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml#protocol-
numbers-1.
ETSI
---------------------- Page: 7 ----------------------
8 ETSI TS 103 280 V2.9.1 (2022-12)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
Not applicable.
3 Definition of terms, symbols and abbreviations
3.1 Terms
Void.
3.2 Symbols
Void.
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
rd
3GPP 3 Generation Partnership Project
ASCII American Standard Code for Information Interchange
ASN.1 Abstract Syntax Notation One
CC Content of Communication
CI Cell Identity
CGI Cell Global Identification
CIDR Classless Inter-Domain Routing
CSP Communications Service Provider
E-UTRAN Evolved Universal Terrestrial Radio Access Network
ECGI E-UTRAN Cell Global Identification
ECI E-UTRAN Cell Identity
EUI Extended Unique Identifier
GPSI Generic Public Subscription Identifier
HEX HEXadecimal
HI Handover Interface
HI1 Handover Interface port 1 (for administrative information)
HI2 Handover Interface port 2 (for Intercept Related Information)
HI3 Handover Interface port 3 (for Content of Communication)
IANA Internet Assigned Numbers Authority
ICCID Integrated Circuit Card Identifier
IEC International Electrotechnical Commission
IEEE Institute of Electrical and Electronics Engineers
IEI Information Element Identifier
IETF Internet Engineering Task Force
IMEI International Mobile station Equipment Identity
IMEISV International Mobile station Equipment Identity and Software Version number
IMSI International Mobile Subscriber Identity
IP Internet Protocol
IPv4 Internet Protocol version 4
ETSI
---------------------- Page: 8 ----------------------
9 ETSI TS 103 280 V2.9.1 (2022-12)
IPv6 Internet Protocol version 6
IRI Intercept Related Information
ISO International Organization for Standardization
ITU-T International Telecommunication Union - Telecommunication
LAC Location Area Code
LDID Lawful Disclosure IDentifier
LEA Law Enforcement Agency
LIID Lawful Interception Identifier
MAC Media Access Control
MCC Mobile Country Code
MNC Mobile Network Code
NAI Network Access Identifier
NCGI NR Cell Global Identification
NCI NR Cell Global Identity
NIMA National Imagery and Mapping Agency
NR New Radio
PEI Permanent Equipment Identifier
POSIX Portable Operating System Interface
RFC Request For Comments
SIP Session Initialization Protocol
SUCI Subscription Concealed Identifier
SUPI Subscription Permanent Identifier
TCP Transmission Control Protocol
UDP User Datagram Protocol
URI Uniform Resource Identifier
UTC Coordinated Universal Time
UUID Universally Unique IDentifier
WGS84 World Geodetic System 1984
XML eXtended Markup Language
XSD XML Schema Definition
4 Release management
This clause describes the release management requirements. The requirements are:
• The version of the present document is defined as ...
• The major version should be incremented when making a backwards incompatible change.
• The minor version should be incremented when adding backwards compatible functionality.
• The patch version should be incremented when fixing a backwards compatible bug.
• Once a major version has been incremented, the previous major version will be supported for 2 years after
publication of the new version. Change requests issued to a version that is no longer supported will need to be
issued for the latest supported major version.
5 Parameter requirements
5.0 Introduction
This clause describes the requirements a parameter should comply to in order to be specified as a common parameter.
ETSI
---------------------- Page: 9 ----------------------
10 ETSI TS 103 280 V2.9.1 (2022-12)
5.1 Parameter attributes
Name
• The parameter should be assigned a unique name. The naming conventions used are described in clause 5.2.
Description
• A description of the parameter should be provided.
Usage guidance
• If there are circumstances in which additional usage guidance is applicable, use cases may be described in this
attribute.
References to other specifications
• If the parameter is specified in another specification (such as an RFC), a reference to that specification shall be
provided. If possible, the reference should point to the exact clause in the specification.
EXAMPLE: Specify one or more sample values of the parameter.
Technical means to define and validate the parameter
• If possible, provide a regular expression to specify the value that is accepted by this parameter.
Implementations may be required to perform additional validation on the value. The regular expressions
follow the IEEE POSIX [19], section 9 regular expression format but shall be limited to the regular expression
capabilities supported by XSD [2] patterns, which are matched to the entire value and sha
...
SLOVENSKI STANDARD
SIST-TS ETSI/TS 103 280 V2.9.1:2023
01-julij-2023
Zakonito prestrezanje (LI) - Slovar skupnih parametrov
Lawful Interception (LI) - Dictionary for common parameters
Ta slovenski standard je istoveten z: ETSI TS 103 280 V2.9.1 (2022-12)
ICS:
33.040.35 Telefonska omrežja Telephone networks
SIST-TS ETSI/TS 103 280 V2.9.1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS ETSI/TS 103 280 V2.9.1:2023
---------------------- Page: 2 ----------------------
SIST-TS ETSI/TS 103 280 V2.9.1:2023
ETSI TS 103 280 V2.9.1 (2022-12)
TECHNICAL SPECIFICATION
Lawful Interception (LI);
Dictionary for common parameters
---------------------- Page: 3 ----------------------
SIST-TS ETSI/TS 103 280 V2.9.1:2023
2 ETSI TS 103 280 V2.9.1 (2022-12)
Reference
RTS/LI-00234
Keywords
dictionary, lawful interception, security
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST-TS ETSI/TS 103 280 V2.9.1:2023
3 ETSI TS 103 280 V2.9.1 (2022-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Release management . 9
5 Parameter requirements . 9
5.0 Introduction . 9
5.1 Parameter attributes . 10
5.2 Parameter naming conventions . 10
5.3 Technology conventions . 10
6 Parameter dictionary. 11
6.1 LIID . 11
6.2 UTCDateTime . 11
6.3 UTCMicrosecondDateTime . 12
6.4 QualifiedDateTime . 12
6.5 QualifiedMicrosecondDateTime . 12
6.6 InternationalE164 . 12
6.7 IMSI . 13
6.8 IMEI . 13
6.9 IMEICheckDigit . 13
6.10 IMEISV . 13
6.11 IPv4Address . 14
6.12 IPv4CIDR . 14
6.13 IPv6Address . 14
6.14 IPv6CIDR . 14
6.15 IPAddress . 15
6.16 IPCIDR . 15
6.17 TCPPort . 15
6.18 TCPPortRange . 16
6.19 UDPPort . 16
6.20 UDPPortRange . 16
6.21 Port . 17
6.22 PortRange . 17
6.23 IPAddressP ort . 17
6.24 IPAddressPortRange . 18
6.25 MACAddress . 18
6.26 EmailAddress . 18
6.27 UUID . 18
6.28 ISOCountryCode . 19
6.29 ShortString . 19
6.30 LongString . 19
6.31 SIPURI . 19
6.32 TELURI . 19
6.33 WGS84CoordinateDecimal . 20
6.34 WGS84LatitudeDecimal . 20
6.35 WGS84LongitudeDecimal . 20
ETSI
---------------------- Page: 5 ----------------------
SIST-TS ETSI/TS 103 280 V2.9.1:2023
4 ETSI TS 103 280 V2.9.1 (2022-12)
6.36 WGS84CoordinateAngular . 21
6.37 WGS84LatitudeAngular . 21
6.38 WGS84LongitudeAngular . 21
6.39 SUPIIMSI . 22
6.40 SUPINAI . 22
6.41 SUCI . 22
6.42 PEIIMEI . 22
6.43 PEIIMEICheckDigit . 23
6.44 PEIIMEISV . 23
6.45 GPSIMSISDN . 23
6.46 GPSINAI . 23
6.47 NAI . 24
6.48 LDID . 24
6.49 InternationalizedEmailAddress . 24
6.50 EUI64 . 24
6.51 CGI . 25
6.52 ECGI . 25
6.53 NCGI . 25
6.54 ICCID . 25
6.55 IPProtocol . 25
7 Technical implementation . 26
7.1 XSD . 26
7.2 ASN.1 . 26
Annex A (normative): XSD definition . 27
Annex B (normative): ASN.1 definition . 31
Annex C (informative): Change Request history . 33
History . 34
ETSI
---------------------- Page: 6 ----------------------
SIST-TS ETSI/TS 103 280 V2.9.1:2023
5 ETSI TS 103 280 V2.9.1 (2022-12)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Lawful Interception (LI).
The ASN.1 and XSD technical implementations are both available as an electronic attachment to the present document.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 7 ----------------------
SIST-TS ETSI/TS 103 280 V2.9.1:2023
6 ETSI TS 103 280 V2.9.1 (2022-12)
1 Scope
The present document defines a dictionary of parameters that are commonly used in multiple TC LI specifications.
Aside from defining a dictionary, the present document aims to provide technical means for other specifications to use.
It is encouraged to use the present document in the development of new specifications.
It is foreseen that regular maintenance of the present document is required. As such, release management requirements
will be defined.
Before accepting any new common parameter, the present document will provide a set of requirements the parameter
has to comply to in order to become a common parameter.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI TS 102 232-1: "Lawful Interception (LI); Handover Interface and Service-Specific Details
(SSD) for IP delivery; Part 1: Handover specification for IP delivery".
®
[2] W3C Recommendation 5 April 2012: "W3C XML Schema Definition Language (XSD) 1.1
Part 2: Datatypes".
[3] Recommendation ITU-T X.680: "Information technology - Abstract Syntax Notation One
(ASN.1): Specification of basic notation".
[4] Recommendation ITU-T E.164: "The international public telecommunication numbering plan".
[5] Recommendation ITU-T E.212: "The international identification plan for public networks and
subscriptions".
[6] ETSI TS 123 003: "Digital cellular telecommunications system (Phase 2+) (GSM); Universal
Mobile Telecommunications System (UMTS); LTE; 5G; Numbering, addressing and identification
(3GPP TS 23.003)".
[7] ETSI TS 102 657: "Lawful Interception (LI); Retained data handling; Handover interface for the
request and delivery of retained data".
[8] IETF RFC 791: "Internet Protocol".
[9] IETF RFC 4632: "Classless Inter-domain Routing (CIDR): The Internet Address Assignment and
Aggregation Plan".
[10] IETF RFC 8200: "Internet Protocol, Version 6 (IPv6) Specification".
[11] IETF RFC 4291: "IP Version 6 Addressing Architecture".
[12] IETF RFC 793: "Transmission Control Protocol".
[13] IETF RFC 768: "User Datagram Protocol".
ETSI
---------------------- Page: 8 ----------------------
SIST-TS ETSI/TS 103 280 V2.9.1:2023
7 ETSI TS 103 280 V2.9.1 (2022-12)
[14] IEEE 802.3™: "IEEE Standard for Ethernet".
[15] IETF RFC 5322: "Internet Message Format".
[16] WHATWG community: "HTML Living standard".
NOTE: Available at https://html.spec.whatwg.org/.
[17] IETF RFC 4122: "A Universally Unique IDentifier (UUID) URN Namespace".
[18] ISO 3166-1: "Codes for the representation of names of countries and their subdivisions -- Part 1:
Country codes".
[19] IEEE 1003.1-2017™: "IEEE Standard for Information Technology--Portable Operating System
Interface (POSIX(TM)) Base Specifications, Issue 7".
[20] ISO/IEC 7812-1:2017: "Identification cards -- Identification of issuers -- Part 1: Numbering
system".
[21] IETF RFC 3261: "SIP: Session Initiation Protocol".
[22] IETF RFC 3966: "The tel URI for Telephone Numbers".
[23] NIMA Technical Report 8350.2: "Department of Defense World Geodetic System 1984, Its
Definition and Relationships With Local Geodetic Systems".
[24] ETSI TS 123 501: "5G; System architecture for the 5G System (5GS) (3GPP TS 23.501)".
[25] ETSI TS 133 501: "5G; Security architecture and procedures for 5G System (3GPP TS 33.501)".
[26] IETF RFC 7542: "The Network Access Identifier".
[27] ETSI TS 124 501: "5G; Non-Access-Stratum (NAS) protocol for 5G System (5GS); Stage 3
(3GPP TS 24.501)".
[28] ETSI TS 103 120: "Lawful Interception (LI); Interface for warrant information".
®
[29] W3C Recommendation 16 August 2006: "Extensible Markup Language (XML) 1.1 (Second
Edition)".
[30] IETF RFC 6530: "Overview and Framework for Internationalized Email".
[31] IETF RFC 7042: "IANA Considerations and IETF Protocol and Documentation Usage for IEEE
802 Parameters".
[32] ETSI TS 102 221: "Smart Cards; UICC-Terminal interface; Physical and logical characteristics".
[33] ETSI TS 129 571: "5G; 5G System; Common Data Types for Service Based Interfaces; Stage 3
(3GPP TS 29.571)".
[34] IANA: "Assigned Internet Protocol Numbers".
NOTE: Available at https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml#protocol-
numbers-1.
ETSI
---------------------- Page: 9 ----------------------
SIST-TS ETSI/TS 103 280 V2.9.1:2023
8 ETSI TS 103 280 V2.9.1 (2022-12)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
Not applicable.
3 Definition of terms, symbols and abbreviations
3.1 Terms
Void.
3.2 Symbols
Void.
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
rd
3GPP 3 Generation Partnership Project
ASCII American Standard Code for Information Interchange
ASN.1 Abstract Syntax Notation One
CC Content of Communication
CI Cell Identity
CGI Cell Global Identification
CIDR Classless Inter-Domain Routing
CSP Communications Service Provider
E-UTRAN Evolved Universal Terrestrial Radio Access Network
ECGI E-UTRAN Cell Global Identification
ECI E-UTRAN Cell Identity
EUI Extended Unique Identifier
GPSI Generic Public Subscription Identifier
HEX HEXadecimal
HI Handover Interface
HI1 Handover Interface port 1 (for administrative information)
HI2 Handover Interface port 2 (for Intercept Related Information)
HI3 Handover Interface port 3 (for Content of Communication)
IANA Internet Assigned Numbers Authority
ICCID Integrated Circuit Card Identifier
IEC International Electrotechnical Commission
IEEE Institute of Electrical and Electronics Engineers
IEI Information Element Identifier
IETF Internet Engineering Task Force
IMEI International Mobile station Equipment Identity
IMEISV International Mobile station Equipment Identity and Software Version number
IMSI International Mobile Subscriber Identity
IP Internet Protocol
IPv4 Internet Protocol version 4
ETSI
---------------------- Page: 10 ----------------------
SIST-TS ETSI/TS 103 280 V2.9.1:2023
9 ETSI TS 103 280 V2.9.1 (2022-12)
IPv6 Internet Protocol version 6
IRI Intercept Related Information
ISO International Organization for Standardization
ITU-T International Telecommunication Union - Telecommunication
LAC Location Area Code
LDID Lawful Disclosure IDentifier
LEA Law Enforcement Agency
LIID Lawful Interception Identifier
MAC Media Access Control
MCC Mobile Country Code
MNC Mobile Network Code
NAI Network Access Identifier
NCGI NR Cell Global Identification
NCI NR Cell Global Identity
NIMA National Imagery and Mapping Agency
NR New Radio
PEI Permanent Equipment Identifier
POSIX Portable Operating System Interface
RFC Request For Comments
SIP Session Initialization Protocol
SUCI Subscription Concealed Identifier
SUPI Subscription Permanent Identifier
TCP Transmission Control Protocol
UDP User Datagram Protocol
URI Uniform Resource Identifier
UTC Coordinated Universal Time
UUID Universally Unique IDentifier
WGS84 World Geodetic System 1984
XML eXtended Markup Language
XSD XML Schema Definition
4 Release management
This clause describes the release management requirements. The requirements are:
• The version of the present document is defined as ...
• The major version should be incremented when making a backwards incompatible change.
• The minor version should be incremented when adding backwards compatible functionality.
• The patch version should be incremented when fixing a backwards compatible bug.
• Once a major version has been incremented, the previous major version will be supported for 2 years after
publication of the new version. Change requests issued to a version that is no longer supported will need to be
issued for the latest supported major version.
5 Parameter requirements
5.0 Introduction
This clause describes the requirements a parameter should comply to in order to be specified as a common parameter.
ETSI
---------------------- Page: 11 ----------------------
SIST-TS ETSI/TS 103 280 V2.9.1:2023
10 ETSI TS 103 280 V2.9.1 (2022-12)
5.1 Parameter attributes
Name
• The parameter should be assigned a unique name. The naming conventions used are described in clause
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.