iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1012-2:2001

(Main)

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

This standard is applicable to all vacuum pumps, vacuum pump combinations and vacuum pumping systems. The standard lists the significant hazards associated with vacuum pumps and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of vacuum pumps during their foreseeable life and subsequent disposal.   The scope does not include pumps designed to pump continuously on open systems where the pump inlet pressure is above 75 kPa (750 mbar) absolute, (i.e. vacuum cleaners, ventilation fans).  Vacuum pumps intended for use in special applications shall also comply with any specific standards relating to those applications.

Kompressoren und Vakuumpumpen - Sicherheitsanforderungen - Teil 2: Vakuumpumpen

Diese Norm gilt für alle Vakuumpumpen, Vakuumpumpenkombinationen und Vakuumpumpsysteme. Die Norm listet die besonders mit Vakuumpumpen verbundenen Gefährdungen auf und legt Sicherheitsanforderungen fest, die bei Konstruktion, Aufstellung, Betrieb, Instandhaltung und Auseinandernehmen von Vakuumpumpen während ihrer zu erwartenden Lebensdauer und nachfolgenden Entsorgung anzuwenden sind.

Compresseurs et pompes a vide - Prescriptions de sécurité - Partie 2: Pompes a vide

La présente norme est applicable a toutes les pompes a vide, combinaisons et systemes de pompes a vide. La présente norme énumere les risques significatifs associés aux pompes a vide et prescrit les exigences de sécurité applicables a la conception, a l'installation, au fonctionnement, a la maintenance et au démontage des pompes a vide au cours de leur durée de vie prévisible et de leur mise au rebut ultérieure.

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

General Information

Status
Withdrawn
Publication Date
31-Mar-2000
Withdrawal Date
04-Oct-2009
ICS
23.140 - Compressors and pneumatic machines
23.160 - Vacuum technology
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
05-Oct-2009
Due Date
28-Oct-2009
Completion Date
05-Oct-2009
Directive
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
EN 1012-2:1996 - Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

Relations

Child
SIST EN 1012-1:2000 - Compressors and vacuum pumps - Safety requirements - Part 1: Compressors
Effective Date
22-Dec-2008
Consolidated By
SIST EN 1012-2:2001+A1:2009 - Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
Effective Date
18-Jan-2023
Consolidated By
SIST EN 1012-2:2001+A1:2009 - Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
Effective Date
19-Jan-2023
Amended By
SIST EN 1012-2:2001/kprA1:2009 - Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
Effective Date
01-May-2009
Consolidated By
SIST EN 1012-2:2001+A1:2009 - Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
Effective Date
01-Dec-2009

Buy Standard

EN 1012-2:2001EN 1012-2:2001
PreviousNext
Standard
EN 1012-2:2001
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumpsKompressoren und Vakuumpumpen - Sicherheitsanforderungen - Teil 2: VakuumpumpenCompresseurs et pompes a vide - Prescriptions de sécurité - Partie 2: Pompes a videCompressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps23.160Vakumska tehnologijaVacuum technology23.140VWURMLCompressors and pneumatic machinesICS:Ta slovenski standard je istoveten z:EN 1012-2:1996SIST EN 1012-2:2001en01-junij-2001SIST EN 1012-2:2001SLOVENSKI
STANDARD



SIST EN 1012-2:2001



SI
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1012-3:2014(Main)
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
EN 1012-3:2013

This European Standard is applicable to process gas compressors and process gas compressor units having an operating pressure greater than 0,5 bar (gauge), an input shaft power greater than 0,5 kW and designed to compress all gases other than air, nitrogen or inert gases which are covered in Part 1. This document deals with all significant hazards, hazardous situations and events relevant to the design, installation, operation, maintenance, dismantling and disposal of process gas compressors and process gas compressor units, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacture. This part of EN 1012 includes under the general term compressor units those machines which comprise: - the compressor; - a drive system including the prime mover; - any component or device supplied which is necessary for operation. This part of EN 1012 is not applicable to compressors which are manufactured before the date of publication of this document by CEN. The requirements of this European Standard do not take into account the interaction between the compressor/compressor unit and other processes carried out on site. Excluded are: - refrigerant compressors used in refrigerating systems or heat pumps for which the safety requirements are given in EN 60335-2-34 or EN 12693; - the specification of performance levels and/or safety integrity levels for safety related parts of control systems. Performance levels and/or safety integrity levels are an important aspect of compressor design and should be determined by the manufacturer and the user based on a risk assessment (see Introduction). This European Standard does not cover those safety aspects of road transport dealt with by EC legislation for trailers.

  • Standard
    105 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1012-1:2010
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
EN 1012-1:2010

This standard is applicable to all types of compressors. The standard lists the significant hazards associated with compressors and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of compressors during their foreseeable lifetime and subsequent disposal.   Compressors intended for use in special applications shall also comply with any specific standards relating to those applications.  This standard specifies safety requirements for all compressors and additional requirements for the following specific types:  Compressors for various types of gases  - oil-lubricated air compressors - oil-flooded air compressors - oil-free air compressors - compressors for handling hazardous gases (gas compressors) - compressors for handling oxygen - compressors for handling acetylene  Compressors for extreme temperature and pressures  - high pressure compressors, over 40 bar - compressors for low inlet temperatures, below 0 oC.  Other types of compressors  - large compressors (over 1000 kW, input power) - portable and skid mounted air compressors - compressors exposed for potentially explosive atmospheres  Exceptions  The following compressors are excluded from the scope of this standard:  - compressors having a shaft input power of less than 0,5 kW - compressors for gases other than acetylene, having a maximum allowable working pressure of less than 0,5 bar - refrigerant compressors used in refrigerating systems or heat pumps as defined in EN 378.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1012-2:2001+A1:2009(Main)
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
EN 1012-2:1996+A1:2009

This standard is applicable to all vacuum pumps, vacuum pump combinations and vacuum pumping systems. The standard lists the significant hazards associated with vacuum pumps and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of vacuum pumps during their foreseeable life and subsequent disposal.
The scope does not include pumps designed to pump continuously on open systems where the pump inlet pressure is above 75 kPA (750 mbar) absolute, i.e. vacuum cleaners, ventilation fans).
Vacuum pumps intended for use in special applications shall also comply with any specific standards relating to those applications.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 2151:2008(Main)
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004)
EN ISO 2151:2008

This International Standard specifies methods for the measurement, determination and declaration of the noise emission from portable and stationary compressors and vacuum pumps. It prescribes the mounting, loading and working conditions under which measurements are to be made, and includes measurement or determination of the noise emission expressed as - the sound power level under specified load conditions, - the emission sound pressure level at the work station under specified load conditions.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1012-2:2001/kprA1:2009(Amendment)
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
EN 1012-2:1996/prA1

This standard is applicable to all vacuum pumps, vacuum pump combinations and vacuum pumping systems. The standard lists the significant hazards associated with vacuum pumps and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of vacuum pumps during their foreseeable life and subsequent disposal.
The scope does not include pumps designed to pump continuously on open systems where the pump inlet pressure is above 75 kPA (750 mbar) absolute, i.e. vacuum cleaners, ventilation fans).
Vacuum pumps intended for use in special applications shall also comply with any specific standards relating to those applications.

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 1012-3:2008(Main)
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
prEN 1012-3

This part of EN 1012 is applicable to compressors having an operating pressure greater than 0,5 bar and designed to utilise all gases other than air, nitrogen or inert gases which are covered in part 1. The standard lists the significant hazards associated with compressors and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of compressors during their foreseeable lifetime and subsequent disposal.
This part of EN 1012 includes under the general term compressors, those machines which comprise;
- the compressor itself
- a prime mover
- any component or device supplied which is necessary for safe operation of the compressor.
In addition it applies to partly completed compressors having a compressor in combination with some of these components as well as compressor assemblies operating in combination.
Excluded are refrigerant compressors used in refrigerating systems or heat pumps as defined in EN 378-1.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 18623-1:2023(Main)
Air compressors and compressed air systems - Part 1: Air compressor safety requirements (ISO/DIS 18623-1:2023)
prEN ISO 18623-1

This part 1 of ISO 18623 is applicable to compressors and compressor units having an operating pressure greater than 0,5 bar and designed to compress air, nitrogen or inert gases. This standard deals with all significant hazards, hazardous situations and events relevant to the design, installation, operation, maintenance, dismantling and disposal of compressors and compressor units, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This part of ISO 18623 includes under the general term compressor units those machines which comprise:
- the compressor;
- a drive system;
- any component or device which is necessary for operation.
This part covers compressors driven by any power media, including battery powered and which are fitted in or used with motor vehicles.
The significant hazards dealt with in the standard are identified in Annex A.
It does not cover requirements for compressors and compressor units used in potentially explosive atmospheres.
It is not applicable to compressors and compressor units which are manufactured before the date of publication of this standard.
It does not cover compressors and compressor units for processing petroleum, petrochemicals, or chemicals within the scope of ISO/TC 67.

  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1012-3:2014(Main)
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
EN 1012-3:2013

This European Standard is applicable to process gas compressors and process gas compressor units having an operating pressure greater than 0,5 bar (gauge), an input shaft power greater than 0,5 kW and designed to compress all gases other than air, nitrogen or inert gases which are covered in Part 1. This document deals with all significant hazards, hazardous situations and events relevant to the design, installation, operation, maintenance, dismantling and disposal of process gas compressors and process gas compressor units, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacture. This part of EN 1012 includes under the general term compressor units those machines which comprise: - the compressor; - a drive system including the prime mover; - any component or device supplied which is necessary for operation. This part of EN 1012 is not applicable to compressors which are manufactured before the date of publication of this document by CEN. The requirements of this European Standard do not take into account the interaction between the compressor/compressor unit and other processes carried out on site. Excluded are: - refrigerant compressors used in refrigerating systems or heat pumps for which the safety requirements are given in EN 60335-2-34 or EN 12693; - the specification of performance levels and/or safety integrity levels for safety related parts of control systems. Performance levels and/or safety integrity levels are an important aspect of compressor design and should be determined by the manufacturer and the user based on a risk assessment (see Introduction). This European Standard does not cover those safety aspects of road transport dealt with by EC legislation for trailers.

  • Standard
    105 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1012-1:2010
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
EN 1012-1:2010

This standard is applicable to all types of compressors. The standard lists the significant hazards associated with compressors and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of compressors during their foreseeable lifetime and subsequent disposal.   Compressors intended for use in special applications shall also comply with any specific standards relating to those applications.  This standard specifies safety requirements for all compressors and additional requirements for the following specific types:  Compressors for various types of gases  - oil-lubricated air compressors - oil-flooded air compressors - oil-free air compressors - compressors for handling hazardous gases (gas compressors) - compressors for handling oxygen - compressors for handling acetylene  Compressors for extreme temperature and pressures  - high pressure compressors, over 40 bar - compressors for low inlet temperatures, below 0 oC.  Other types of compressors  - large compressors (over 1000 kW, input power) - portable and skid mounted air compressors - compressors exposed for potentially explosive atmospheres  Exceptions  The following compressors are excluded from the scope of this standard:  - compressors having a shaft input power of less than 0,5 kW - compressors for gases other than acetylene, having a maximum allowable working pressure of less than 0,5 bar - refrigerant compressors used in refrigerating systems or heat pumps as defined in EN 378.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1012-2:2001+A1:2009(Main)
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
EN 1012-2:1996+A1:2009

This standard is applicable to all vacuum pumps, vacuum pump combinations and vacuum pumping systems. The standard lists the significant hazards associated with vacuum pumps and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of vacuum pumps during their foreseeable life and subsequent disposal.
The scope does not include pumps designed to pump continuously on open systems where the pump inlet pressure is above 75 kPA (750 mbar) absolute, i.e. vacuum cleaners, ventilation fans).
Vacuum pumps intended for use in special applications shall also comply with any specific standards relating to those applications.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day